HS codes by chapter › Chapter 73 › Heading 7304

HTS code 7304 — Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel

Source: USITC Harmonized Tariff Schedule. The rate shown is the general rate (column 1). Additional US duties can apply to some goods and origins, and rates change — confirm the current rate before you file.

Tariff lines under 7304

HTS codeDescriptionGeneral rate
7304.11.00.20Line pipe of a kind used for oil or gas pipelines › Of stainless steel › Having an outside diameter not exceeding 114.3 mmFree
7304.11.00.50Line pipe of a kind used for oil or gas pipelines › Of stainless steel › Having an outside diameter exceeding 114.3 mm but not exceeding 406.4 mmFree
7304.11.00.80Line pipe of a kind used for oil or gas pipelines › Of stainless steel › Having an outside diameter exceeding 406.4 mmFree
7304.19.10.20Line pipe of a kind used for oil or gas pipelines › Other › Of iron or nonalloy steel › Having an outside diameter not exceeding 114.3 mmFree
7304.19.10.30Line pipe of a kind used for oil or gas pipelines › Other › Of iron or nonalloy steel › Having an outside diameter exceeding 114.3 mm but less than 215.9 mmFree
7304.19.10.45Line pipe of a kind used for oil or gas pipelines › Other › Of iron or nonalloy steel › Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm › Having a wall thickness less than 12.7 mmFree
7304.19.10.60Line pipe of a kind used for oil or gas pipelines › Other › Of iron or nonalloy steel › Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm › Having a wall thickness of 12.7 mm or moreFree
7304.19.10.80Line pipe of a kind used for oil or gas pipelines › Other › Of iron or nonalloy steel › Having an outside diameter exceeding 406.4 mmFree
7304.19.50.20Line pipe of a kind used for oil or gas pipelines › Other › Of other alloy steel › Having an outside diameter not exceeding 114.3 mmFree
7304.19.50.50Line pipe of a kind used for oil or gas pipelines › Other › Of other alloy steel › Having an outside diameter exceeding 114.3 mm but not exceeding 406.4 mmFree
7304.19.50.80Line pipe of a kind used for oil or gas pipelines › Other › Of other alloy steel › Having an outside diameter exceeding 406.4 mmFree
7304.22.00.30Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Drill pipe of stainless steel › Having an outside diameter not exceeding 168.3 mm › Having a wall thickness not exceeding 9.5 mmFree
7304.22.00.45Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Drill pipe of stainless steel › Having an outside diameter not exceeding 168.3 mm › Having a wall thickness exceeding 9.5 mmFree
7304.22.00.60Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Drill pipe of stainless steel › Having an outside diameter exceeding 168.3 mmFree
7304.23.30.00Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other drill pipe › Of iron or nonalloy steelFree
7304.23.60.30Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other drill pipe › Of alloy steel › Having an outside diameter not exceeding 168.3 mm › Having a wall thickness not exceeding 9.5 mmFree
7304.23.60.45Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other drill pipe › Of alloy steel › Having an outside diameter not exceeding 168.3 mm › Having a wall thickness exceeding 9.5 mmFree
7304.23.60.60Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other drill pipe › Of alloy steel › Having an outside diameter exceeding 168.3 mmFree
7304.24.30.10Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other, of stainless steel › Casing › Threaded or coupled › Having an outside diameter less than 215.9 mm › Having a wall thickness less than 12.7 mmFree
7304.24.30.20Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other, of stainless steel › Casing › Threaded or coupled › Having an outside diameter less than 215.9 mm › Having a wall thickness of 12.7 mm or moreFree
7304.24.30.30Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other, of stainless steel › Casing › Threaded or coupled › Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm › Having a wall thickness less than 12.7 mmFree
7304.24.30.40Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other, of stainless steel › Casing › Threaded or coupled › Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm › Having a wall thickness of 12.7 mm or moreFree
7304.24.30.45Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other, of stainless steel › Casing › Threaded or coupled › Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mmFree
7304.24.30.80Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other, of stainless steel › Casing › Threaded or coupled › Having an outside diameter exceeding 406.4 mmFree
7304.24.40.10Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other, of stainless steel › Casing › Other › Having an outside diameter less than 215.9 mm › Having a wall thickness less than 12.7 mmFree
7304.24.40.20Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other, of stainless steel › Casing › Other › Having an outside diameter less than 215.9 mm › Having a wall thickness of 12.7 mm or moreFree
7304.24.40.30Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other, of stainless steel › Casing › Other › Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm › Having a wall thickness less than 12.7 mmFree
7304.24.40.40Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other, of stainless steel › Casing › Other › Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm › Having a wall thickness of 12.7 mm or moreFree
7304.24.40.50Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other, of stainless steel › Casing › Other › Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm › Having a wall thickness less than 12.7 mmFree
7304.24.40.60Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other, of stainless steel › Casing › Other › Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm › Having a wall thickness of 12.7 mm or moreFree
7304.24.40.80Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other, of stainless steel › Casing › Other › Having an outside diameter exceeding 406.4 mmFree
7304.24.60.15Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other, of stainless steel › Tubing › Having an outside diameter not exceeding 114.3 mm › Having a wall thickness not exceeding 9.5 mmFree
7304.24.60.30Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other, of stainless steel › Tubing › Having an outside diameter not exceeding 114.3 mm › Having a wall thickness exceeding 9.5 mmFree
7304.24.60.45Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other, of stainless steel › Tubing › Having an outside diameter exceeding 114.3 mm but less than 215.9 mmFree
7304.24.60.60Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other, of stainless steel › Tubing › Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mmFree
7304.24.60.75Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other, of stainless steel › Tubing › Having an outside diameter exceeding 406.4 mmFree
7304.29.10.10Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of iron or nonalloy steel › Threaded or coupled › Having an outside diameter less than 215.9 mm › Having a wall thickness less than 12.7 mmFree
7304.29.10.20Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of iron or nonalloy steel › Threaded or coupled › Having an outside diameter less than 215.9 mm › Having a wall thickness of 12.7 mm or moreFree
7304.29.10.30Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of iron or nonalloy steel › Threaded or coupled › Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm › Having a wall thickness less than 12.7 mmFree
7304.29.10.40Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of iron or nonalloy steel › Threaded or coupled › Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm › Having a wall thickness of 12.7 mm or moreFree
7304.29.10.50Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of iron or nonalloy steel › Threaded or coupled › Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm › Having a wall thickness less than 12.7 mmFree
7304.29.10.60Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of iron or nonalloy steel › Threaded or coupled › Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm › Having a wall thickness of 12.7 mm or moreFree
7304.29.10.80Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of iron or nonalloy steel › Threaded or coupled › Having an outside diameter exceeding 406.4 mmFree
7304.29.20.10Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of iron or nonalloy steel › Other › Having an outside diameter less than 215.9 mm › Having a wall thickness less than 12.7 mmFree
7304.29.20.20Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of iron or nonalloy steel › Other › Having an outside diameter less than 215.9 mm › Having a wall thickness of 12.7 mm or moreFree
7304.29.20.30Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of iron or nonalloy steel › Other › Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm › Having a wall thickness less than 12.7 mmFree
7304.29.20.40Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of iron or nonalloy steel › Other › Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm › Having a wall thickness of 12.7 mm or moreFree
7304.29.20.50Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of iron or nonalloy steel › Other › Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm › Having a wall thickness less than 12.7 mmFree
7304.29.20.60Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of iron or nonalloy steel › Other › Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm › Having a wall thickness of 12.7 mm or moreFree
7304.29.20.80Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of iron or nonalloy steel › Other › Having an outside diameter exceeding 406.4 mmFree
7304.29.31.10Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of other alloy steel › Threaded or coupled › Having an outside diameter less than 215.9 mm › Having a wall thickness less than 12.7 mmFree
7304.29.31.20Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of other alloy steel › Threaded or coupled › Having an outside diameter less than 215.9 mm › Having a wall thickness of 12.7 mm or moreFree
7304.29.31.30Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of other alloy steel › Threaded or coupled › Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm › Having a wall thickness less than 12.7 mmFree
7304.29.31.40Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of other alloy steel › Threaded or coupled › Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm › Having a wall thickness of 12.7 mm or moreFree
7304.29.31.50Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of other alloy steel › Threaded or coupled › Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm › Having a wall thickness less than 12.7 mmFree
7304.29.31.60Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of other alloy steel › Threaded or coupled › Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm › Having a wall thickness of 12.7 mm or moreFree
7304.29.31.80Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of other alloy steel › Threaded or coupled › Having an outside diameter exceeding 406.4 mmFree
7304.29.41.10Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of other alloy steel › Other › Having an outside diameter less than 215.9 mm › Having a wall thickness less than 12.7 mmFree
7304.29.41.20Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of other alloy steel › Other › Having an outside diameter less than 215.9 mm › Having a wall thickness of 12.7 mm or moreFree
7304.29.41.30Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of other alloy steel › Other › Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm › Having a wall thickness less than 12.7 mmFree
7304.29.41.40Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of other alloy steel › Other › Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm › Having a wall thickness of 12.7 mm or moreFree
7304.29.41.50Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of other alloy steel › Other › Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm › Having a wall thickness less than 12.7 mmFree
7304.29.41.60Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of other alloy steel › Other › Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm › Having a wall thickness of 12.7 mm or moreFree
7304.29.41.80Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Casing › Of other alloy steel › Other › Having an outside diameter exceeding 406.4 mmFree
7304.29.50.15Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Tubing › Of iron or nonalloy steel › Having an outside diameter not exceeding 114.3 mm › Having a wall thickness not exceeding 9.5 mmFree
7304.29.50.30Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Tubing › Of iron or nonalloy steel › Having an outside diameter not exceeding 114.3 mm › Having a wall thickness exceeding 9.5 mmFree
7304.29.50.45Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Tubing › Of iron or nonalloy steel › Having an outside diameter exceeding 114.3 mm but less than 215.9 mmFree
7304.29.50.60Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Tubing › Of iron or nonalloy steel › Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mmFree
7304.29.50.75Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Tubing › Of iron or nonalloy steel › Having an outside diameter exceeding 406.4 mmFree
7304.29.61.15Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Tubing › Of other alloy steel › Having an outside diameter not exceeding 114.3 mm › Having a wall thickness not exceeding 9.5 mmFree
7304.29.61.30Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Tubing › Of other alloy steel › Having an outside diameter not exceeding 114.3 mm › Having a wall thickness exceeding 9.5 mmFree
7304.29.61.45Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Tubing › Of other alloy steel › Having an outside diameter exceeding 114.3 mm but less than 215.9 mmFree
7304.29.61.60Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Tubing › Of other alloy steel › Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mmFree
7304.29.61.75Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other › Tubing › Of other alloy steel › Having an outside diameter exceeding 406.4 mmFree
7304.31.30.00Other, of circular cross section, of iron or nonalloy steel › Cold-drawn or cold-rolled (cold-reduced) › Hollow barsFree
7304.31.60.10Other, of circular cross section, of iron or nonalloy steel › Cold-drawn or cold-rolled (cold-reduced) › Other › Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heatersFree
7304.31.60.50Other, of circular cross section, of iron or nonalloy steel › Cold-drawn or cold-rolled (cold-reduced) › Other › OtherFree
7304.39.00.02Other, of circular cross section, of iron or nonalloy steel › Other › Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters › Having an outside diameter less than 38.1 mmFree
7304.39.00.04Other, of circular cross section, of iron or nonalloy steel › Other › Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters › Having an outside diameter of 38.1 mm or more but less than 190.5 mmFree
7304.39.00.06Other, of circular cross section, of iron or nonalloy steel › Other › Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters › Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mmFree
7304.39.00.08Other, of circular cross section, of iron or nonalloy steel › Other › Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters › Having an outside diameter exceeding 285.8 mmFree
7304.39.00.16Other, of circular cross section, of iron or nonalloy steel › Other › Other › Galvanized, having an outside diameter not exceeding 114.3 mmFree
7304.39.00.20Other, of circular cross section, of iron or nonalloy steel › Other › Other › Other › Having an outside diameter less than 38.1 mmFree
7304.39.00.24Other, of circular cross section, of iron or nonalloy steel › Other › Other › Other › Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm › Having a wall thickness less than 6.4 mmFree
7304.39.00.28Other, of circular cross section, of iron or nonalloy steel › Other › Other › Other › Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm › Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mmFree
7304.39.00.32Other, of circular cross section, of iron or nonalloy steel › Other › Other › Other › Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm › Having a wall thickness exceeding 12.7 mmFree
7304.39.00.36Other, of circular cross section, of iron or nonalloy steel › Other › Other › Other › Having an outside diameter exceeding 114.3 mm but less than 190.5 mm › Having a wall thickness less than 12.7 mmFree
7304.39.00.40Other, of circular cross section, of iron or nonalloy steel › Other › Other › Other › Having an outside diameter exceeding 114.3 mm but less than 190.5 mm › Having a wall thickness of 12.7 mm or more but less than 19 mmFree
7304.39.00.44Other, of circular cross section, of iron or nonalloy steel › Other › Other › Other › Having an outside diameter exceeding 114.3 mm but less than 190.5 mm › Having a wall thickness of 19 mm or moreFree
7304.39.00.48Other, of circular cross section, of iron or nonalloy steel › Other › Other › Other › Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm › Having a wall thickness less than 12.7 mmFree
7304.39.00.52Other, of circular cross section, of iron or nonalloy steel › Other › Other › Other › Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm › Having a wall thickness of 12.7 mm or more but less than 19 mmFree
7304.39.00.56Other, of circular cross section, of iron or nonalloy steel › Other › Other › Other › Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm › Having a wall thickness of 19 mm or moreFree
7304.39.00.62Other, of circular cross section, of iron or nonalloy steel › Other › Other › Other › Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm › Having a wall thickness less than 12.7 mmFree
7304.39.00.68Other, of circular cross section, of iron or nonalloy steel › Other › Other › Other › Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm › Having a wall thickness of 12.7 mm or more but less than 19 mmFree
7304.39.00.72Other, of circular cross section, of iron or nonalloy steel › Other › Other › Other › Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm › Having a wall thickness of 19 mm or moreFree
7304.39.00.76Other, of circular cross section, of iron or nonalloy steel › Other › Other › Other › Having an outside diameter exceeding 406.4 mm › Having a wall thickness less than 19 mmFree
7304.39.00.80Other, of circular cross section, of iron or nonalloy steel › Other › Other › Other › Having an outside diameter exceeding 406.4 mm › Having a wall thickness of 19 mm or moreFree
7304.41.30.05Other, of circular cross section, of stainless steel › Cold-drawn or cold-rolled (cold-reduced) › Of an external diameter of less than 19 mm › Of high-nickel alloy steelFree
7304.41.30.15Other, of circular cross section, of stainless steel › Cold-drawn or cold-rolled (cold-reduced) › Of an external diameter of less than 19 mm › Other › Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heatersFree
7304.41.30.45Other, of circular cross section, of stainless steel › Cold-drawn or cold-rolled (cold-reduced) › Of an external diameter of less than 19 mm › Other › OtherFree
7304.41.60.05Other, of circular cross section, of stainless steel › Cold-drawn or cold-rolled (cold-reduced) › Other › Of high-nickel alloy steelFree
7304.41.60.15Other, of circular cross section, of stainless steel › Cold-drawn or cold-rolled (cold-reduced) › Other › Other › Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heatersFree
7304.41.60.45Other, of circular cross section, of stainless steel › Cold-drawn or cold-rolled (cold-reduced) › Other › Other › OtherFree
7304.49.00.05Other, of circular cross section, of stainless steel › Other › Of high-nickel alloy steelFree
7304.49.00.15Other, of circular cross section, of stainless steel › Other › Other › Hollow barsFree
7304.49.00.45Other, of circular cross section, of stainless steel › Other › Other › Other › Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heatersFree
7304.49.00.60Other, of circular cross section, of stainless steel › Other › Other › Other › OtherFree
7304.51.10.00Other, of circular cross section, of other alloy steel › Cold-drawn or cold-rolled (cold-reduced) › Suitable for use in the manufacture of ball or roller bearingsFree
7304.51.50.05Other, of circular cross section, of other alloy steel › Cold-drawn or cold-rolled (cold-reduced) › Other › Of high-nickel alloy steelFree
7304.51.50.15Other, of circular cross section, of other alloy steel › Cold-drawn or cold-rolled (cold-reduced) › Other › Other › Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters › Of heat-resisting steelFree
7304.51.50.45Other, of circular cross section, of other alloy steel › Cold-drawn or cold-rolled (cold-reduced) › Other › Other › Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters › OtherFree
7304.51.50.60Other, of circular cross section, of other alloy steel › Cold-drawn or cold-rolled (cold-reduced) › Other › Other › OtherFree
7304.59.10.00Other, of circular cross section, of other alloy steel › Other › Suitable for use in the manufacture of ball or roller bearingsFree
7304.59.20.30Other, of circular cross section, of other alloy steel › Other › Other › Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters › Of heat-resisting steelFree
7304.59.20.40Other, of circular cross section, of other alloy steel › Other › Other › Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters › Other › Having an outside diameter less than 38.1 mmFree
7304.59.20.45Other, of circular cross section, of other alloy steel › Other › Other › Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters › Other › Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mmFree
7304.59.20.55Other, of circular cross section, of other alloy steel › Other › Other › Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters › Other › Having an outside diameter exceeding 114.3 mm but less than 190.5 mmFree
7304.59.20.60Other, of circular cross section, of other alloy steel › Other › Other › Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters › Other › Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mmFree
7304.59.20.70Other, of circular cross section, of other alloy steel › Other › Other › Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters › Other › Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mmFree
7304.59.20.80Other, of circular cross section, of other alloy steel › Other › Other › Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters › Other › Having an outside diameter exceeding 406.4 mmFree
7304.59.60.00Other, of circular cross section, of other alloy steel › Other › Other › Other › Of heat-resisting steelFree
7304.59.80.10Other, of circular cross section, of other alloy steel › Other › Other › Other › Other › Having an outside diameter less than 38.1 mmFree
7304.59.80.15Other, of circular cross section, of other alloy steel › Other › Other › Other › Other › Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm › Having a wall thickness less than 6.4 mmFree
7304.59.80.20Other, of circular cross section, of other alloy steel › Other › Other › Other › Other › Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm › Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mmFree
7304.59.80.25Other, of circular cross section, of other alloy steel › Other › Other › Other › Other › Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm › Having a wall thickness exceeding 12.7 mmFree
7304.59.80.30Other, of circular cross section, of other alloy steel › Other › Other › Other › Other › Having an outside diameter exceeding 114.3 mm but less than 190.5 mm › Having a wall thickness less than 12.7 mmFree
7304.59.80.35Other, of circular cross section, of other alloy steel › Other › Other › Other › Other › Having an outside diameter exceeding 114.3 mm but less than 190.5 mm › Having a wall thickness of 12.7 mm or more but less than 19 mmFree
7304.59.80.40Other, of circular cross section, of other alloy steel › Other › Other › Other › Other › Having an outside diameter exceeding 114.3 mm but less than 190.5 mm › Having a wall thickness of 19 mm or moreFree
7304.59.80.45Other, of circular cross section, of other alloy steel › Other › Other › Other › Other › Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm › Having a wall thickness less than 12.7 mmFree
7304.59.80.50Other, of circular cross section, of other alloy steel › Other › Other › Other › Other › Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm › Having a wall thickness of 12.7 mm or more but less than 19 mmFree
7304.59.80.55Other, of circular cross section, of other alloy steel › Other › Other › Other › Other › Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm › Having a wall thickness of 19 mm or moreFree
7304.59.80.60Other, of circular cross section, of other alloy steel › Other › Other › Other › Other › Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm › Having a wall thickness less than 12.7 mmFree
7304.59.80.65Other, of circular cross section, of other alloy steel › Other › Other › Other › Other › Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm › Having a wall thickness of 12.7 mm or more but less than 19 mmFree
7304.59.80.70Other, of circular cross section, of other alloy steel › Other › Other › Other › Other › Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm › Having a wall thickness of 19 mm or moreFree
7304.59.80.80Other, of circular cross section, of other alloy steel › Other › Other › Other › Other › Having an outside diameter exceeding 406.4 mmFree
7304.90.10.00Other › Having a wall thickness of 4 mm or more › Of iron or nonalloy steelFree
7304.90.30.00Other › Having a wall thickness of 4 mm or more › Of alloy steelFree
7304.90.50.00Other › Having a wall thickness of less than 4 mm › Of iron or nonalloy steelFree
7304.90.70.00Other › Having a wall thickness of less than 4 mm › Of alloy steelFree

Shipping products under this heading?

Paste your product list and get the suggested code and duty estimate for every item. The first 3 items are free; a full pack of 100 items is $49, one time, no subscription.

Classify my products

The same heading in the other systems: EU CN code 7304 · UK commodity code 7304. Have a code already? Check what a code covers.