HS codes by chapter › Chapter 72 › Heading 7219

HTS code 7219 — Flat-rolled products of stainless steel, of a width of 600 mm or more

Source: USITC Harmonized Tariff Schedule. The rate shown is the general rate (column 1). Additional US duties can apply to some goods and origins, and rates change — confirm the current rate before you file.

Tariff lines under 7219

HTS codeDescriptionGeneral rate
7219.11.00.30Not further worked than hot-rolled, in coils › Of a thickness exceeding 10 mm › Of a width not exceeding 1575 mmFree
7219.11.00.60Not further worked than hot-rolled, in coils › Of a thickness exceeding 10 mm › Of a width exceeding 1575 mmFree
7219.12.00.02Not further worked than hot-rolled, in coils › Of a thickness of 4.75 mm or more but not exceeding 10 mm › Not annealed or not pickledFree
7219.12.00.06Not further worked than hot-rolled, in coils › Of a thickness of 4.75 mm or more but not exceeding 10 mm › Other › Of high-nickel alloy steelFree
7219.12.00.21Not further worked than hot-rolled, in coils › Of a thickness of 4.75 mm or more but not exceeding 10 mm › Other › Other › Of a width of 1370 mm or more › Of a thickness exceeding 6.8 mm › Of a width not exceeding 1575 mmFree
7219.12.00.26Not further worked than hot-rolled, in coils › Of a thickness of 4.75 mm or more but not exceeding 10 mm › Other › Other › Of a width of 1370 mm or more › Of a thickness exceeding 6.8 mm › Of a width exceeding 1575 mmFree
7219.12.00.51Not further worked than hot-rolled, in coils › Of a thickness of 4.75 mm or more but not exceeding 10 mm › Other › Other › Of a width of 1370 mm or more › Other › Of a width not exceeding 1575 mmFree
7219.12.00.56Not further worked than hot-rolled, in coils › Of a thickness of 4.75 mm or more but not exceeding 10 mm › Other › Other › Of a width of 1370 mm or more › Other › Of a width exceeding 1575 mmFree
7219.12.00.66Not further worked than hot-rolled, in coils › Of a thickness of 4.75 mm or more but not exceeding 10 mm › Other › Other › Other › Containing more than 0.5 percent by weight of nickel › Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
7219.12.00.71Not further worked than hot-rolled, in coils › Of a thickness of 4.75 mm or more but not exceeding 10 mm › Other › Other › Other › Containing more than 0.5 percent by weight of nickel › OtherFree
7219.12.00.81Not further worked than hot-rolled, in coils › Of a thickness of 4.75 mm or more but not exceeding 10 mm › Other › Other › Other › OtherFree
7219.13.00.02Not further worked than hot-rolled, in coils › Of a thickness of 3 mm or more but less than 4.75 mm › Not annealed or not pickledFree
7219.13.00.31Not further worked than hot-rolled, in coils › Of a thickness of 3 mm or more but less than 4.75 mm › Other › Of a width of 1370 mm or moreFree
7219.13.00.51Not further worked than hot-rolled, in coils › Of a thickness of 3 mm or more but less than 4.75 mm › Other › Other › Containing more than 0.5 percent but less than 24 percent by weight of nickel › Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
7219.13.00.71Not further worked than hot-rolled, in coils › Of a thickness of 3 mm or more but less than 4.75 mm › Other › Other › Containing more than 0.5 percent but less than 24 percent by weight of nickel › OtherFree
7219.13.00.81Not further worked than hot-rolled, in coils › Of a thickness of 3 mm or more but less than 4.75 mm › Other › Other › OtherFree
7219.14.00.30Not further worked than hot-rolled, in coils › Of a thickness of less than 3 mm › Of a width of 1370 mm or moreFree
7219.14.00.65Not further worked than hot-rolled, in coils › Of a thickness of less than 3 mm › Other › Of high-nickel alloy steelFree
7219.14.00.90Not further worked than hot-rolled, in coils › Of a thickness of less than 3 mm › Other › OtherFree
7219.21.00.05Not further worked than hot-rolled, not in coils › Of a thickness exceeding 10 mm › Of high-nickel alloy steelFree
7219.21.00.20Not further worked than hot-rolled, not in coils › Of a thickness exceeding 10 mm › Other › Of a width not exceeding 1575 mmFree
7219.21.00.40Not further worked than hot-rolled, not in coils › Of a thickness exceeding 10 mm › Other › Of a width exceeding 1575 mm but not exceeding 1880 mmFree
7219.21.00.60Not further worked than hot-rolled, not in coils › Of a thickness exceeding 10 mm › Other › Of a width exceeding 1880 mmFree
7219.22.00.05Not further worked than hot-rolled, not in coils › Of a thickness of 4.75 mm or more but not exceeding 10 mm › Of high-nickel alloy steelFree
7219.22.00.15Not further worked than hot-rolled, not in coils › Of a thickness of 4.75 mm or more but not exceeding 10 mm › Other › Containing more than 0.5 percent by weight of nickel › Containing more than 1.5 percent but less than 5 percent by weight of molybdenum › Of a width not exceeding 1575 mmFree
7219.22.00.20Not further worked than hot-rolled, not in coils › Of a thickness of 4.75 mm or more but not exceeding 10 mm › Other › Containing more than 0.5 percent by weight of nickel › Containing more than 1.5 percent but less than 5 percent by weight of molybdenum › Of a width exceeding 1575 mm but not exceeding 1880 mmFree
7219.22.00.25Not further worked than hot-rolled, not in coils › Of a thickness of 4.75 mm or more but not exceeding 10 mm › Other › Containing more than 0.5 percent by weight of nickel › Containing more than 1.5 percent but less than 5 percent by weight of molybdenum › Of a width exceeding 1880 mmFree
7219.22.00.35Not further worked than hot-rolled, not in coils › Of a thickness of 4.75 mm or more but not exceeding 10 mm › Other › Containing more than 0.5 percent by weight of nickel › Other › Of a width not exceeding 1575 mmFree
7219.22.00.40Not further worked than hot-rolled, not in coils › Of a thickness of 4.75 mm or more but not exceeding 10 mm › Other › Containing more than 0.5 percent by weight of nickel › Other › Of a width exceeding 1575 mm but not exceeding 1880 mmFree
7219.22.00.45Not further worked than hot-rolled, not in coils › Of a thickness of 4.75 mm or more but not exceeding 10 mm › Other › Containing more than 0.5 percent by weight of nickel › Other › Of a width exceeding 1880 mmFree
7219.22.00.70Not further worked than hot-rolled, not in coils › Of a thickness of 4.75 mm or more but not exceeding 10 mm › Other › Other › Of a width not exceeding 1575 mmFree
7219.22.00.75Not further worked than hot-rolled, not in coils › Of a thickness of 4.75 mm or more but not exceeding 10 mm › Other › Other › Of a width exceeding 1575 mm but not exceeding 1880 mmFree
7219.22.00.80Not further worked than hot-rolled, not in coils › Of a thickness of 4.75 mm or more but not exceeding 10 mm › Other › Other › Of a width exceeding 1880 mmFree
7219.23.00.30Not further worked than hot-rolled, not in coils › Of a thickness of 3 mm or more but less than 4.75 mm › Of a width of 1370 mm or moreFree
7219.23.00.60Not further worked than hot-rolled, not in coils › Of a thickness of 3 mm or more but less than 4.75 mm › OtherFree
7219.24.00.30Not further worked than hot-rolled, not in coils › Of a thickness of less than 3 mm › Of a width of 1370 mm or moreFree
7219.24.00.60Not further worked than hot-rolled, not in coils › Of a thickness of less than 3 mm › OtherFree
7219.31.00.10Not further worked than cold-rolled (cold-reduced) › Of a thickness of 4.75 mm or more › In coilsFree
7219.31.00.50Not further worked than cold-rolled (cold-reduced) › Of a thickness of 4.75 mm or more › Not in coilsFree
7219.32.00.05Not further worked than cold-rolled (cold-reduced) › Of a thickness of 3 mm or more but less than 4.75 mm › In coils › Of a width of 1370 mm or more › Of high-nickel alloy steelFree
7219.32.00.20Not further worked than cold-rolled (cold-reduced) › Of a thickness of 3 mm or more but less than 4.75 mm › In coils › Of a width of 1370 mm or more › Other › Containing more than 0.5 percent by weight of nickelFree
7219.32.00.25Not further worked than cold-rolled (cold-reduced) › Of a thickness of 3 mm or more but less than 4.75 mm › In coils › Of a width of 1370 mm or more › Other › OtherFree
7219.32.00.35Not further worked than cold-rolled (cold-reduced) › Of a thickness of 3 mm or more but less than 4.75 mm › In coils › Other › Of high-nickel alloy steelFree
7219.32.00.36Not further worked than cold-rolled (cold-reduced) › Of a thickness of 3 mm or more but less than 4.75 mm › In coils › Other › Other › Containing more than 0.5 percent by weight of nickel › Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
7219.32.00.38Not further worked than cold-rolled (cold-reduced) › Of a thickness of 3 mm or more but less than 4.75 mm › In coils › Other › Other › Containing more than 0.5 percent by weight of nickel › OtherFree
7219.32.00.42Not further worked than cold-rolled (cold-reduced) › Of a thickness of 3 mm or more but less than 4.75 mm › In coils › Other › Other › Other › Containing less than 15 percent by weight of chromiumFree
7219.32.00.44Not further worked than cold-rolled (cold-reduced) › Of a thickness of 3 mm or more but less than 4.75 mm › In coils › Other › Other › Other › OtherFree
7219.32.00.45Not further worked than cold-rolled (cold-reduced) › Of a thickness of 3 mm or more but less than 4.75 mm › Not in coils › Of a width of 1370 mm or moreFree
7219.32.00.60Not further worked than cold-rolled (cold-reduced) › Of a thickness of 3 mm or more but less than 4.75 mm › Not in coils › OtherFree
7219.33.00.05Not further worked than cold-rolled (cold-reduced) › Of a thickness exceeding 1 mm but less than 3 mm › In coils › Of a width of 1370 mm or more › Of high-nickel alloy steelFree
7219.33.00.20Not further worked than cold-rolled (cold-reduced) › Of a thickness exceeding 1 mm but less than 3 mm › In coils › Of a width of 1370 mm or more › Other › Containing more than 0.5 percent by weight of nickelFree
7219.33.00.25Not further worked than cold-rolled (cold-reduced) › Of a thickness exceeding 1 mm but less than 3 mm › In coils › Of a width of 1370 mm or more › Other › OtherFree
7219.33.00.35Not further worked than cold-rolled (cold-reduced) › Of a thickness exceeding 1 mm but less than 3 mm › In coils › Other › Of high-nickel alloy steelFree
7219.33.00.36Not further worked than cold-rolled (cold-reduced) › Of a thickness exceeding 1 mm but less than 3 mm › In coils › Other › Other › Containing more than 0.5 percent by weight of nickel › Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
7219.33.00.38Not further worked than cold-rolled (cold-reduced) › Of a thickness exceeding 1 mm but less than 3 mm › In coils › Other › Other › Containing more than 0.5 percent by weight of nickel › OtherFree
7219.33.00.42Not further worked than cold-rolled (cold-reduced) › Of a thickness exceeding 1 mm but less than 3 mm › In coils › Other › Other › Other › Containing less than 15 percent by weight of chromiumFree
7219.33.00.44Not further worked than cold-rolled (cold-reduced) › Of a thickness exceeding 1 mm but less than 3 mm › In coils › Other › Other › Other › OtherFree
7219.33.00.45Not further worked than cold-rolled (cold-reduced) › Of a thickness exceeding 1 mm but less than 3 mm › Not in coils › Of a width of 1370 mm or moreFree
7219.33.00.70Not further worked than cold-rolled (cold-reduced) › Of a thickness exceeding 1 mm but less than 3 mm › Not in coils › Other › Containing more than 0.5 percent but less than 24 percent by weight of nickelFree
7219.33.00.80Not further worked than cold-rolled (cold-reduced) › Of a thickness exceeding 1 mm but less than 3 mm › Not in coils › Other › OtherFree
7219.34.00.05Not further worked than cold-rolled (cold-reduced) › Of a thickness of 0.5 mm or more but not exceeding 1 mm › In coils › Of high-nickel alloy steelFree
7219.34.00.20Not further worked than cold-rolled (cold-reduced) › Of a thickness of 0.5 mm or more but not exceeding 1 mm › In coils › Other › Containing more than 0.5 percent by weight of nickel › Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
7219.34.00.25Not further worked than cold-rolled (cold-reduced) › Of a thickness of 0.5 mm or more but not exceeding 1 mm › In coils › Other › Containing more than 0.5 percent by weight of nickel › OtherFree
7219.34.00.30Not further worked than cold-rolled (cold-reduced) › Of a thickness of 0.5 mm or more but not exceeding 1 mm › In coils › Other › Other › Containing less than 15 percent by weight of chromiumFree
7219.34.00.35Not further worked than cold-rolled (cold-reduced) › Of a thickness of 0.5 mm or more but not exceeding 1 mm › In coils › Other › Other › OtherFree
7219.34.00.50Not further worked than cold-rolled (cold-reduced) › Of a thickness of 0.5 mm or more but not exceeding 1 mm › Not in coilsFree
7219.35.00.05Not further worked than cold-rolled (cold-reduced) › Of a thickness of less than 0.5 mm › In coils › Containing more than 0.5 percent but less than 24 percent by weight of nickel › Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
7219.35.00.15Not further worked than cold-rolled (cold-reduced) › Of a thickness of less than 0.5 mm › In coils › Containing more than 0.5 percent but less than 24 percent by weight of nickel › OtherFree
7219.35.00.30Not further worked than cold-rolled (cold-reduced) › Of a thickness of less than 0.5 mm › In coils › Other › Containing less than 15 percent by weight of chromiumFree
7219.35.00.35Not further worked than cold-rolled (cold-reduced) › Of a thickness of less than 0.5 mm › In coils › Other › OtherFree
7219.35.00.50Not further worked than cold-rolled (cold-reduced) › Of a thickness of less than 0.5 mm › Not in coilsFree
7219.90.00.10Other › Of high-nickel alloy steelFree
7219.90.00.20Other › Other › Containing more than 0.5 percent by weight of nickel › Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFree
7219.90.00.25Other › Other › Containing more than 0.5 percent by weight of nickel › OtherFree
7219.90.00.60Other › Other › Other › Containing less than 15 percent by weight of chromiumFree
7219.90.00.80Other › Other › Other › OtherFree

Shipping products under this heading?

Paste your product list and get the suggested code and duty estimate for every item. The first 3 items are free; a full pack of 100 items is $49, one time, no subscription.

Classify my products

The same heading in the other systems: EU CN code 7219 · UK commodity code 7219. Have a code already? Check what a code covers.