Commodity codes by chapter › Chapter 85 › Heading 8503

Commodity code 8503 — Parts suitable for use solely or principally with the machines of heading 8501 or 8502

Source: UK Trade Tariff, published by HM Revenue & Customs. The rate shown is the third-country duty rate — the rate that applies when no trade-agreement preference is claimed.

Commodity lines under 8503

Commodity codeDescriptionThird-country duty
8503 00 10 00Non-magnetic retaining rings
8503 00 10 10Non-magnetic retaining rings › For use in certain types of aircraft2.00 %
8503 00 10 90Non-magnetic retaining rings › Other2.00 %
8503 00 20 00Steel laminations and stator and rotor cores, whether or not stacked
8503 00 20 10Steel laminations and stator and rotor cores, whether or not stacked › For use in certain types of aircraft2.00 %
8503 00 20 20Steel laminations and stator and rotor cores, whether or not stacked › Plated steel core of the electric motor rotor of electric air conditioning compressors for motor vehicles: <br>-with an outer diameter of 65 mm or more but not more than 80 mm, <br>-with an inner diameter of 15 mm or more but not more than 25 mm, <br>-with a height of 30 mm or more but not more than 45 mm, <br>-with a weight of 0,5 kg or more but not more than 0,8 kg,<br>-without windings<br>2.00 %
8503 00 20 30Steel laminations and stator and rotor cores, whether or not stacked › Plated steel core of the electric motor stator of electric air conditioning compressors for motor vehicles: <br>-with an outer diameter of 90 mm or more but not more than 120 mm,<br>-with an inner diameter of 65 mm or more but not more than 80 mm, <br>-with a height of 30 mm or more but not more than 45 mm, <br>-with a weight of 0,7 kg or more but not more than 1,2 kg,<br>-without windings<br>2.00 %
8503 00 20 90Steel laminations and stator and rotor cores, whether or not stacked › Other2.00 %
8503 00 91 00Other
8503 00 91 00Other › Of cast iron or cast steel
8503 00 91 10Other › Of cast iron or cast steel › For use in certain types of aircraft2.00 %
8503 00 91 31Other › Of cast iron or cast steel › Other
8503 00 91 31Other › Of cast iron or cast steel › Other › Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring or bearing mounted in steel housing2.00 %
8503 00 91 99Other › Of cast iron or cast steel › Other › Other2.00 %
8503 00 98 00Other › Other
8503 00 98 10Other › Other › For use in certain types of aircraft2.00 %
8503 00 98 32Other › Other › Other
8503 00 98 32Other › Other › Other › Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring or bearing mounted in steel housing2.00 %
8503 00 98 33Other › Other › Other › Stator for brushless motor of electrical power steering with a roundness tolerance of 50 μm2.00 %
8503 00 98 37Other › Other › Other › Rotor for electric motor, with the rotor cylindrical body made of agglomerated ferrite or sintered neodymium or plastoneodymium, with or without metal shaft and with or without plastic elements: <br>- diameter of the rotor body of 15mm or more but not more than 37mm,<br>- length of the rotor body of 12mm or more but not more than 36mm<br>2.00 %
8503 00 98 40Other › Other › Other › Pressure casted inner housing of a cooling channel system for an electrical motor:<br>-of en ac-47100 aluminum,<br>-shot-blasted and machined,<br>-leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure,<br>-with a hardness of 70 or more on the hardness brinell wolfram (hbw) scale (2,5/62,5, according to iso 6506),<br>-with a tensile strength of 190 n/mm² or more,<br>-with a height of 160 mm or more, but not more than 330 mm,<br>-with a diameter of 240 mm or more, but not more than 368 mm,<br>-with a weight of 3 kg or more, but not more than 5,84 kg<br>2.00 %
8503 00 98 43Other › Other › Other › Silicone or plastic keyboards, comprising:<br>-parts of common metal, and<br>-whether or not comprising parts of plastic,<br>-epoxy resin reinforced with fiberglass or wood,<br>-whether or not printed or surface-treated,<br>-with or without electrical conductors,<br>-with or without a membrane bonded to the keyboard,<br>-with or without mono or multilayer protective film<br>2.00 %
8503 00 98 45Other › Other › Other › Armature for the electric motor in starter motors of passenger cars and commercial vehicles with:<br>-an outer diameter of 52 mm or more but not more than 80 mm,<br>-a commutator copper wire diameter of 2 mm or more but not more than 4 mm<br>2.00 %
8503 00 98 53Other › Other › Other › Pressure casted rotor cover of the cooling channel system in the electrical motor:<br>- of en ac-47100-f aluminum,<br>- with a sealing cap of stainless steel,<br>- shot-blasted and machined,<br>- leakproof to the degree of 1ml per minute or less under 2,75 bar pressure,<br>- with a hardness of 70 hbw or more (2,5/62,5, according to iso 6506), <br>- with a tensile strength of 190 n/mm² or more,<br>- with a height of 42mm or more, but not more than 64mm,<br>- with a diameter of 88mm or more, but not more than 132mm,<br>- with a weight of 0,3kg or more, but not more than 0,5kg<br>2.00 %
8503 00 98 55Other › Other › Other › Stator for brushless motor, with:<br>-an internal diameter of 206,6 mm (± 0,5)<br>-an external diameter of 265,0 mm (± 0,2) and<br>-a width of 37,2 mm or more but not more than 47,8 mm<br>of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums2.00 %
8503 00 98 63Other › Other › Other › Pressure casted outer housing of an electrical motor: <br>- of en ac-47100 aluminum,<br>- with or without overmolded bearing sleeves of martensitic stainless steel and assembled sealing caps of stainless steel,<br>- shot-blasted and machined,<br>- with or without a rotor chamber, leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure,<br>- with a hardness of 70 or more on the hardness brinell wolfram (hbw) scale (2,5/62,5, according to iso 6506),<br>- with a tensile strength of 190 n/mm² or more,<br>- with a height of 195mm or more, but not more than 430mm,<br>- with a width of 290mm or more, but not more than 625mm,<br>- with a length of 270mm or more, but not more than 535mm,<br>- with a weight of 5,2kg or more, but not more than 12,5kg<br>2.00 %
8503 00 98 73Other › Other › Other › Pressure die-cast electric motor stator housing:<br>-of en ac-46000 aluminium,<br>-shot-blasted and machined,<br>-with a height of 70 mm or more but not more than 76 mm,<br>-with a width of 155 mm or more but not more than 162 mm,<br>-with a weight of 330 g or more but not more than 360 g<br>2.00 %
8503 00 98 75Other › Other › Other › Stator body of stacked electrical sheet having:<br>-an inner diameter of 18 mm or more, but not more than 35 mm,<br>-an outer diameter of 35 mm or more, but not more than 65 mm, and<br>-a length of 20 mm or more, but not more than 65 mm<br>-whether or not incorporated in a housing2.00 %
8503 00 98 99Other › Other › Other › Other2.00 %

Shipping products under this heading?

Paste your product list and get the suggested commodity code and duty rate for every item. The first 3 items are free; a full pack of 100 items is $49, one time, no subscription.

Classify my products

The same heading in the other systems: US HTS code 8503 · EU CN code 8503. Have a code already? Check what a code covers.