Commodity codes by chapter › Chapter 84 › Heading 8483

Commodity code 8483 — Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints)

Source: UK Trade Tariff, published by HM Revenue & Customs. The rate shown is the third-country duty rate — the rate that applies when no trade-agreement preference is claimed.

Commodity lines under 8483

Commodity codeDescriptionThird-country duty
8483 10 00 00Transmission shafts (including cam shafts and crank shafts) and cranks
8483 10 21 00Transmission shafts (including cam shafts and crank shafts) and cranks › Cranks and crank shafts
8483 10 21 00Transmission shafts (including cam shafts and crank shafts) and cranks › Cranks and crank shafts › Of cast iron or cast steel
8483 10 21 10Transmission shafts (including cam shafts and crank shafts) and cranks › Cranks and crank shafts › Of cast iron or cast steel › For use in civil aircraft
8483 10 21 90Transmission shafts (including cam shafts and crank shafts) and cranks › Cranks and crank shafts › Of cast iron or cast steel › Other4.00 %
8483 10 25 00Transmission shafts (including cam shafts and crank shafts) and cranks › Cranks and crank shafts › Of open-die forged steel
8483 10 25 10Transmission shafts (including cam shafts and crank shafts) and cranks › Cranks and crank shafts › Of open-die forged steel › For use in civil aircraft
8483 10 25 90Transmission shafts (including cam shafts and crank shafts) and cranks › Cranks and crank shafts › Of open-die forged steel › Other4.00 %
8483 10 29 00Transmission shafts (including cam shafts and crank shafts) and cranks › Cranks and crank shafts › Other
8483 10 29 10Transmission shafts (including cam shafts and crank shafts) and cranks › Cranks and crank shafts › Other › For use in civil aircraft
8483 10 29 90Transmission shafts (including cam shafts and crank shafts) and cranks › Cranks and crank shafts › Other › Other4.00 %
8483 10 50 00Transmission shafts (including cam shafts and crank shafts) and cranks › Articulated shafts
8483 10 50 10Transmission shafts (including cam shafts and crank shafts) and cranks › Articulated shafts › For use in civil aircraft
8483 10 50 90Transmission shafts (including cam shafts and crank shafts) and cranks › Articulated shafts › Other4.00 %
8483 10 95 00Transmission shafts (including cam shafts and crank shafts) and cranks › Other
8483 10 95 10Transmission shafts (including cam shafts and crank shafts) and cranks › Other › For use in civil aircraft
8483 10 95 30Transmission shafts (including cam shafts and crank shafts) and cranks › Other › Steel alloy splined shaft (torque shaft) with straight teeth and involute profile, with:<br> -external toothing in a diametral pitch standard,<br> -17 teeth or more, but not more than 50 teeth,<br> -a diameter of 35 mm or more, but not more than 145 mm,<br> -a length of 200 mm or more, but not more than 1345 mm,<br> -a hardness of 35 hrc or more, but not more than 45 hrc4.00 %
8483 10 95 40Transmission shafts (including cam shafts and crank shafts) and cranks › Other › Stepped shaft made of carbon steel with: <br>-rolled, involute profiled, splined shaft end, the helix angle of which is at least 0°15,5' but not more than 0° 21,5',<br>-a largest diameter of 16 mm or more, but not more than 18 mm,<br>-a length of 137 mm or more, but not more than 155 mm,<br>-a weight of 0,12 kg or more, but not more than 0,28 kg<br>4.00 %
8483 10 95 50Transmission shafts (including cam shafts and crank shafts) and cranks › Other › Drum shaft for torque transmission, in steel (to sm45c for shaft standard and sts430 for ring standard) with:<br>-a length of 137,8 mm or more but not more than 138,2 mm,<br>-an outer diameter of 23 mm or more but not more than 48,025 mm,<br>-a weight of 1,0245 kg or more but not more than 1,0445 kg,<br>-a hardness of the shaft of 40 or more on the rockwell c hardness scale (hrc), but not more than 50 hrc,<br>-a ring hardness of 90 or more on the rockwell b hardness scale (hrb), but not more than 120 hrb,<br>-an external 37-teeth spline with major diameter of 41 mm or more but not more than 48 mm<br>4.00 %
8483 10 95 90Transmission shafts (including cam shafts and crank shafts) and cranks › Other › Other4.00 %
8483 20 00 00Bearing housings, incorporating ball or roller bearings6.00 %
8483 30 00 00Bearing housings, not incorporating ball or roller bearings; plain shaft bearings
8483 30 32 00Bearing housings, not incorporating ball or roller bearings; plain shaft bearings › Bearing housings
8483 30 32 00Bearing housings, not incorporating ball or roller bearings; plain shaft bearings › Bearing housings › For ball or roller bearings
8483 30 32 10Bearing housings, not incorporating ball or roller bearings; plain shaft bearings › Bearing housings › For ball or roller bearings › For use in civil aircraft
8483 30 32 30Bearing housings, not incorporating ball or roller bearings; plain shaft bearings › Bearing housings › For ball or roller bearings › Bearing housing of a kind used in turbochargers:<br>- of precision-cast grey cast iron complying with standard din en 1561 or precision-cast ductile cast iron complying with din en 1560,<br>- with oil chambers,<br>- without bearings,<br>- with a diameter of 50 mm or more, but not more than 250 mm,<br>- with a height of 40 mm or more, but not more than 150 mm,<br>- whether or not with water chambers and connectors<br>4.00 %
8483 30 32 90Bearing housings, not incorporating ball or roller bearings; plain shaft bearings › Bearing housings › For ball or roller bearings › Other4.00 %
8483 30 38 00Bearing housings, not incorporating ball or roller bearings; plain shaft bearings › Bearing housings › Other
8483 30 38 10Bearing housings, not incorporating ball or roller bearings; plain shaft bearings › Bearing housings › Other › For use in civil aircraft
8483 30 38 60Bearing housings, not incorporating ball or roller bearings; plain shaft bearings › Bearing housings › Other › Other
8483 30 38 60Bearing housings, not incorporating ball or roller bearings; plain shaft bearings › Bearing housings › Other › Other › Bearing housing of a kind used in turbochargers:<br>- of precision-cast grey cast iron complying with standard din en 1561 or precision-cast ductile cast iron complying with din en 1560,<br>- with oil chambers,<br>- without bearings,<br>- with a diameter of 50 mm or more, but not more than 250 mm,<br>- with a height of 40 mm or more, but not more than 150 mm,<br>- whether or not with water chambers and connectors<br>2.00 %
8483 30 38 99Bearing housings, not incorporating ball or roller bearings; plain shaft bearings › Bearing housings › Other › Other › Other2.00 %
8483 30 80 00Bearing housings, not incorporating ball or roller bearings; plain shaft bearings › Plain shaft bearings
8483 30 80 10Bearing housings, not incorporating ball or roller bearings; plain shaft bearings › Plain shaft bearings › For use in civil aircraft
8483 30 80 30Bearing housings, not incorporating ball or roller bearings; plain shaft bearings › Plain shaft bearings › Commutator end shield (bearing housing with plain shaft bearing) for starter motors of passenger cars and commercial vehicles <br>-produced with high pressure precision die casting technology,<br>-made of aluminium alloy (en ac-46000 or en ac-46000 s, according to the din en 1706 and gb/t 16116 standards),<br>-with sintered plain bearing<br>2.00 %
8483 30 80 90Bearing housings, not incorporating ball or roller bearings; plain shaft bearings › Plain shaft bearings › Other2.00 %
8483 40 00 00Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters
8483 40 21 00Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gears and gearing (other than friction gears)
8483 40 21 00Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gears and gearing (other than friction gears) › Spur and helical
8483 40 21 10Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gears and gearing (other than friction gears) › Spur and helical › For use in civil aircraft0.00 %
8483 40 21 90Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gears and gearing (other than friction gears) › Spur and helical › Other0.00 %
8483 40 23 00Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gears and gearing (other than friction gears) › Bevel and bevel/spur
8483 40 23 10Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gears and gearing (other than friction gears) › Bevel and bevel/spur › For use in civil aircraft0.00 %
8483 40 23 20Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gears and gearing (other than friction gears) › Bevel and bevel/spur › Bevel gear:<br>-made of lightweight alloys and steel,<br>-built on straight or helical bevel gears,<br>-with an angle between the shafts of 30 degrees or more but not more than 90 degrees<br>-with a gear 1:1,3 ratio or more but not more than 1:1,46,<br>for use in the manufacture of grass trimmers, brushcutters and other types of garden machinery0.00 %
8483 40 23 30Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gears and gearing (other than friction gears) › Bevel and bevel/spur › Bevel gear:<br>-made of lightweight alloys and steel,<br>-built on straight bevel gears,<br>-with an angle between the shafts of 24 degrees or more but not more than 35 degrees,<br>for use in the manufacture of grass trimmers, brushcutters and other types of garden machinery0.00 %
8483 40 23 90Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gears and gearing (other than friction gears) › Bevel and bevel/spur › Other0.00 %
8483 40 25 00Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gears and gearing (other than friction gears) › Worm gear
8483 40 25 10Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gears and gearing (other than friction gears) › Worm gear › For use in civil aircraft0.00 %
8483 40 25 20Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gears and gearing (other than friction gears) › Worm gear › Worm gearbox<br>-in an aluminium alloy housing,<br>-with a plastic or steel worm,<br>-with mounting holes,<br>-with a 90 degree reversible drive direction,<br>-with a 4:19 transmission ratio,<br>-equipped with a lead screw with a length of 310 mm or more but not more than 380 mm,<br>-with a guide nut incorporated into the assembly bracket,<br>-with or without a lead screw support,<br>for indirect connection to the drive motor of a car seat guide system0.00 %
8483 40 25 90Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gears and gearing (other than friction gears) › Worm gear › Other0.00 %
8483 40 29 00Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gears and gearing (other than friction gears) › Other
8483 40 29 10Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gears and gearing (other than friction gears) › Other › For use in civil aircraft0.00 %
8483 40 29 50Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gears and gearing (other than friction gears) › Other › Other
8483 40 29 50Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gears and gearing (other than friction gears) › Other › Other › Gear set of cycloid gear type with:<br>- a rated torque of 50 nm or more but not more than 9 000 nm,<br>- standard ratios of 1:50 or more but not more than 1:475,<br>- lost motion of not more than one arc minute,<br>- an efficiency of more than 80 %<br>of a kind used in robot arms<br>0.00 %
8483 40 29 60Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gears and gearing (other than friction gears) › Other › Other › Epicyclic gearing, of a kind used in driving hand-held power tools with:<br>- a rated torque of 25 nm or more, but not more than 70 nm,<br>- standard gear ratios of 1:12.7 or more, but not more than 1:65.30.00 %
8483 40 29 70Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gears and gearing (other than friction gears) › Other › Other › Cast steel planetary cage, with:<br> -external or internal toothing in a diametral pitch standard,<br> -27 teeth or more, but not more than 70 teeth,<br> -a diameter of 300 mm or more, but not more than 725 mm,<br> -a length of 225 mm or more, but not more than 800 mm,<br> -3 or 4 planetary gears,<br> -a hardness of 40 hrc or more, but not more than 45 hrc0.00 %
8483 40 29 89Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gears and gearing (other than friction gears) › Other › Other › Other0.00 %
8483 40 30 00Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Ball or roller screws
8483 40 30 10Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Ball or roller screws › For use in civil aircraft0.00 %
8483 40 30 90Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Ball or roller screws › Other0.00 %
8483 40 51 00Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gear boxes and other speed changers
8483 40 51 00Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gear boxes and other speed changers › Gear boxes
8483 40 51 10Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gear boxes and other speed changers › Gear boxes › For use in civil aircraft0.00 %
8483 40 51 90Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gear boxes and other speed changers › Gear boxes › Other0.00 %
8483 40 59 00Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gear boxes and other speed changers › Other
8483 40 59 10Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gear boxes and other speed changers › Other › For use in civil aircraft0.00 %
8483 40 59 30Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gear boxes and other speed changers › Other › Hydrostatic speed changer:<br>-with a hydro pump and a differential with wheel axle,<br>-whether or not with a fan impeller and/or a pulley,<br>for use in the manufacture of lawn mowers of subheadings 8433 11 and 8433 19 or other mowers of subheading 8433 200.00 %
8483 40 59 90Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Gear boxes and other speed changers › Other › Other0.00 %
8483 40 90 00Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Other
8483 40 90 10Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Other › For use in civil aircraft0.00 %
8483 40 90 80Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Other › Transmission gearbox, with:<br>- not more than 3 gears,<br>- an automatic deceleration system and<br>- a power reversal system, <br>for use in the manufacture of goods of heading 84270.00 %
8483 40 90 99Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters › Other › Other0.00 %
8483 50 00 00Flywheels and pulleys, including pulley blocks
8483 50 20 00Flywheels and pulleys, including pulley blocks › Of cast iron or cast steel
8483 50 20 10Flywheels and pulleys, including pulley blocks › Of cast iron or cast steel › For use in civil aircraft0.00 %
8483 50 20 90Flywheels and pulleys, including pulley blocks › Of cast iron or cast steel › Other0.00 %
8483 50 80 00Flywheels and pulleys, including pulley blocks › Other
8483 50 80 10Flywheels and pulleys, including pulley blocks › Other › For use in civil aircraft0.00 %
8483 50 80 20Flywheels and pulleys, including pulley blocks › Other › Pulley blocks of non-cast steel:<br>- made of structural carbon steel complying with standard jis g4051,<br>- with an external diameter of 104mm or more but not more than 142mm,<br>- with an internal diameter of 33mm or more but not more than 37mm,<br>- with a width of 22mm or more but not more than 40mm,<br>- with a weight of 0,4kg or more but not more than 1,6kg,<br>- with 6 trapezoidal grooves0.00 %
8483 50 80 30Flywheels and pulleys, including pulley blocks › Other › Mechanical tensioner for maintaining the tension of the drive belts of a passenger car engine:<br> -with two pulleys made of polyamide, each of them with a diameter of 50 mm or more but not more than 70 mm,<br> -with a spring made of a steel alloy containing chromium and silicon,<br> -with two arms made of aluminum,<br> -with a holder made of aluminum,<br> for use in the manufacture of motor vehicle engines0.00 %
8483 50 80 40Flywheels and pulleys, including pulley blocks › Other › Flywheel designed for damping torsional vibrations and oscillations within a vehicle drivetrain with:<br>-a total moment of inertia of 0.082 kg⋅m²,<br>-a weight of 7 kg or more, but not more than 8 kg,<br>-a diameter of 250 mm or more, but not more than 280 mm,<br>for use in the manufacture of motor vehicles0.00 %
8483 50 80 50Flywheels and pulleys, including pulley blocks › Other › Metal spinned single or double pulley:<br>-made of dc03 steel or similar non alloy steel or free cutting steel,<br>-with a pitch diameter of 67 mm or more but not more than 145 mm,<br>-with an inner hole designed for bearing mounting or key mounting<br>0.00 %
8483 50 80 60Flywheels and pulleys, including pulley blocks › Other › Metal spinned triple pulley:<br>-made of dc03 steel or similar non-alloy steel or free cutting steel,<br>-with a pitch diameter of 60 mm or more, but not more than 130 mm,<br>-with an inner hole designed for bearing mounting<br>0.00 %
8483 50 80 90Flywheels and pulleys, including pulley blocks › Other › Other0.00 %
8483 60 00 00Clutches and shaft couplings (including universal joints)
8483 60 20 00Clutches and shaft couplings (including universal joints) › Of cast iron or cast steel
8483 60 20 10Clutches and shaft couplings (including universal joints) › Of cast iron or cast steel › For use in civil aircraft0.00 %
8483 60 20 90Clutches and shaft couplings (including universal joints) › Of cast iron or cast steel › Other0.00 %
8483 60 80 00Clutches and shaft couplings (including universal joints) › Other
8483 60 80 10Clutches and shaft couplings (including universal joints) › Other › For use in civil aircraft0.00 %
8483 60 80 20Clutches and shaft couplings (including universal joints) › Other › Overrunning clutch for passenger car and commercial vehicle starter motors with:<br>-a total length of 49,4 mm or more but not more than 210 mm,<br>-a starter motor pinion with 9 or more but not more than 16 teeth<br>0.00 %
8483 60 80 90Clutches and shaft couplings (including universal joints) › Other › Other0.00 %
8483 90 00 00Toothed wheels, chain sprockets and other transmission elements presented separately; parts
8483 90 20 00Toothed wheels, chain sprockets and other transmission elements presented separately; parts › Parts of bearing housings
8483 90 20 10Toothed wheels, chain sprockets and other transmission elements presented separately; parts › Parts of bearing housings › For use in civil aircraft0.00 %
8483 90 20 90Toothed wheels, chain sprockets and other transmission elements presented separately; parts › Parts of bearing housings › Other0.00 %
8483 90 81 00Toothed wheels, chain sprockets and other transmission elements presented separately; parts › Other
8483 90 81 00Toothed wheels, chain sprockets and other transmission elements presented separately; parts › Other › Of cast iron or cast steel
8483 90 81 10Toothed wheels, chain sprockets and other transmission elements presented separately; parts › Other › Of cast iron or cast steel › For use in civil aircraft0.00 %
8483 90 81 90Toothed wheels, chain sprockets and other transmission elements presented separately; parts › Other › Of cast iron or cast steel › Other0.00 %
8483 90 89 00Toothed wheels, chain sprockets and other transmission elements presented separately; parts › Other › Other
8483 90 89 10Toothed wheels, chain sprockets and other transmission elements presented separately; parts › Other › Other › For use in civil aircraft0.00 %
8483 90 89 20Toothed wheels, chain sprockets and other transmission elements presented separately; parts › Other › Other › Sprocket for continuous variable valve timing to optimize the process of filling the cylinders of an internal combustion engine with:<br>-case,<br>-rotor,<br>-at least 4 screws,<br>-spring,<br>-of an external diameter of 80 mm or more but not exceeding 95 mm,<br>-of a thickness of 25 mm or more but not more than 35 mm,<br>for use in the manufacture of engines of motor vehicles0.00 %
8483 90 89 30Toothed wheels, chain sprockets and other transmission elements presented separately; parts › Other › Other › Forged steel sprockets with external toothing, whether or not with internal splines in a diametral pitch standard, with:<br> -a diameter of 400 mm or more, but not more than 630 mm,<br> -7 teeth or more, but not more than 15 teeth,<br> -a tooth core hardness of 28 hrc or more, but not more than 45 hrc,<br> -a tooth surface hardness of 50 hrc or more, but not more than 60 hrc,<br> -whether or not, a spline hardness of 30 hrc or more, but not more than 45 hrc,<br> -an effective carburized case depth of 4 mm or more, but not more than 5 mm0.00 %
8483 90 89 40Toothed wheels, chain sprockets and other transmission elements presented separately; parts › Other › Other › Steel alloy gear wheels with straight teeth and involute profile, with:<br> -external and/or internal toothing in a diametral pitch standard,<br> -a diameter of 35 mm or more, but not more than 600 mm,<br> -13 teeth or more, but not more than 80 teeth,<br> -a tooth core hardness of 28 hrc or more, but not more than 45 hrc,<br> -a tooth surface hardness of 50 hrc or more, but not more than 65 hrc,<br> -an effective carburized case depth of 1,00 mm or more, but not more than 3,1 mm,<br> -a spline hardness of 27 hrc or more, but not more than 62 hrc,<br> -whether or not in combination with a shaft with a spline hardness of 27 hrc or more, but not more than 62 hrc0.00 %
8483 90 89 90Toothed wheels, chain sprockets and other transmission elements presented separately; parts › Other › Other › Other0.00 %

Shipping products under this heading?

Paste your product list and get the suggested commodity code and duty rate for every item. The first 3 items are free; a full pack of 100 items is $49, one time, no subscription.

Classify my products

The same heading in the other systems: US HTS code 8483 · EU CN code 8483. Have a code already? Check what a code covers.