Commodity codes by chapter › Chapter 84 › Heading 8482

Commodity code 8482 — Ball or roller bearings

Source: UK Trade Tariff, published by HM Revenue & Customs. The rate shown is the third-country duty rate — the rate that applies when no trade-agreement preference is claimed.

Commodity lines under 8482

Commodity codeDescriptionThird-country duty
8482 10 00 00Ball bearings
8482 10 10 00Ball bearings › With greatest external diameter not exceeding 30 mm
8482 10 10 15Ball bearings › With greatest external diameter not exceeding 30 mm › Ball bearings with:<br>-an internal diameter of 4 mm or more but not more than 9 mm,<br>-an external diameter of not more than 26 mm,<br>-a width of not more than 8 mm,<br>for use in the manufacture of electromotors with a range of 40 000 rpm or more but not more than 80 000 rpm8.00 %
8482 10 10 90Ball bearings › With greatest external diameter not exceeding 30 mm › Other8.00 %
8482 10 90 00Ball bearings › Other8.00 %
8482 20 00 00Tapered roller bearings, including cone and tapered roller assemblies8.00 %
8482 30 00 00Spherical roller bearings8.00 %
8482 40 00 00Needle roller bearings, including cage and needle roller assemblies8.00 %
8482 50 00 00Other cylindrical roller bearings, including cage and roller assemblies
8482 50 00 20Other cylindrical roller bearings, including cage and roller assemblies › Axial roller bearing made of steel:<br>-the retainer is made of cold-rolled steel with a carbon content of up to 0,25 percent, complying with standard astm a109-98,<br>-the rollers are made of anti-friction steel according to astm 295-94,<br>-with an external diameter of 63 mm or more but not more than 66 mm,<br>-with an internal diameter of 44 mm or more but not more than 46 mm,<br>-with a weight of 23 g or more but not more than 27 g,<br>-with 36 rollers or more but not more than 38 rollers<br>8.00 %
8482 50 00 90Other cylindrical roller bearings, including cage and roller assemblies › Other8.00 %
8482 80 00 00Other, including combined ball/roller bearings
8482 80 00 10Other, including combined ball/roller bearings › Connecting components for use in the production of helicopter tail rotor shafts8.00 %
8482 80 00 90Other, including combined ball/roller bearings › Other8.00 %
8482 91 00 00Parts
8482 91 00 00Parts › Balls, needles and rollers
8482 91 10 00Parts › Balls, needles and rollers › Tapered rollers8.00 %
8482 91 90 00Parts › Balls, needles and rollers › Other
8482 91 90 10Parts › Balls, needles and rollers › Other › Rollers with a logarithmic profile and a diameter of 25 mm or more but not more than 70 mm or balls with a diameter of 30 mm but not more than 100 mm,<br>- made of 100cr6 steel or 100crmnsi6-4 steel (iso 3290),<br>- with a deviation of 0,5 mm or less as determined with the fbhmethod<br>for use in wind turbine industry6.00 %
8482 91 90 90Parts › Balls, needles and rollers › Other › Other6.00 %
8482 99 00 00Parts › Other
8482 99 00 30Parts › Other › Brass cages with the following characteristics:<br>– continuously or centrifugally cast,<br>– turned,<br>– containing by weight 35 % or more, but not more than 38 % of zinc,<br>– containing by weight 0,75 % or more, but not more than 1,25 % of lead,<br>– containing by weight 1,0 % or more, but not more than 1,4 % of aluminium, and<br>– with a tensile strength of 415 pa or more,<br>of a kind used for the manufacture of ball bearings<br>8.00 %
8482 99 00 60Parts › Other › Inner or outer rings made of steel, not hardened or not grinded, outer ring with internal raceway(s), inner ring with external raceway(s), with external diameters of:<br>­ 14 mm or more but not more than 77 mm for the inner ring,<br>­ 26 mm or more but not more than 101 mm for the outer ring<br>for use in the manufacture of bearings8.00 %
8482 99 00 70Parts › Other › Male and female parts of cages,<br>- made of flat-rolled steel,<br>- with a diameter of 14,5 mm or more but not more than 420 mm,<br>- the male part including rivets,<br>- the female part including holes,<br>used for manufacturing of deep grove ball bearings<br>8.00 %
8482 99 00 80Parts › Other › Punched cages of various diameters,<br>- made of flat rolled steel, <br>- with tensile strength of 270 mpa or more,<br>for the production of tapered roller bearings<br>8.00 %
8482 99 00 90Parts › Other › Other8.00 %

Shipping products under this heading?

Paste your product list and get the suggested commodity code and duty rate for every item. The first 3 items are free; a full pack of 100 items is $49, one time, no subscription.

Classify my products

The same heading in the other systems: US HTS code 8482 · EU CN code 8482. Have a code already? Check what a code covers.