Commodity codes by chapter › Chapter 84 › Heading 8481

Commodity code 8481 — Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves

Source: UK Trade Tariff, published by HM Revenue & Customs. The rate shown is the third-country duty rate — the rate that applies when no trade-agreement preference is claimed.

Commodity lines under 8481

Commodity codeDescriptionThird-country duty
8481 10 00 00Pressure-reducing valves
8481 10 05 00Pressure-reducing valves › Combined with filters or lubricators
8481 10 05 10Pressure-reducing valves › Combined with filters or lubricators › For use in certain types of aircraft2.00 %
8481 10 05 90Pressure-reducing valves › Combined with filters or lubricators › Other2.00 %
8481 10 19 00Pressure-reducing valves › Other
8481 10 19 00Pressure-reducing valves › Other › Of cast iron or of steel
8481 10 19 10Pressure-reducing valves › Other › Of cast iron or of steel › For use in certain types of aircraft2.00 %
8481 10 19 90Pressure-reducing valves › Other › Of cast iron or of steel › Other2.00 %
8481 10 99 00Pressure-reducing valves › Other › Other
8481 10 99 10Pressure-reducing valves › Other › Other › For use in certain types of aircraft2.00 %
8481 10 99 40Pressure-reducing valves › Other › Other › Pressure reducing valves in a brass case with:<br>-a length of not more than 30 mm (± 1 mm),<br>-a width of not more than 18 mm (± 1 mm),<br>of a kind used for incorporation in fuel delivery modules of motor vehicles2.00 %
8481 10 99 90Pressure-reducing valves › Other › Other › Other2.00 %
8481 20 00 00Valves for oleohydraulic or pneumatic transmissions
8481 20 10 00Valves for oleohydraulic or pneumatic transmissions › Valves for the control of oleohydraulic power transmission
8481 20 10 20Valves for oleohydraulic or pneumatic transmissions › Valves for the control of oleohydraulic power transmission › For use in certain types of aircraft2.00 %
8481 20 10 90Valves for oleohydraulic or pneumatic transmissions › Valves for the control of oleohydraulic power transmission › Other2.00 %
8481 20 90 00Valves for oleohydraulic or pneumatic transmissions › Valves for the control of pneumatic power transmission
8481 20 90 20Valves for oleohydraulic or pneumatic transmissions › Valves for the control of pneumatic power transmission › For use in certain types of aircraft2.00 %
8481 20 90 90Valves for oleohydraulic or pneumatic transmissions › Valves for the control of pneumatic power transmission › Other2.00 %
8481 30 00 00Check (non-return) valves
8481 30 91 00Check (non-return) valves › Of cast iron or of steel
8481 30 91 20Check (non-return) valves › Of cast iron or of steel › For use in certain types of aircraft2.00 %
8481 30 91 30Check (non-return) valves › Of cast iron or of steel › Other
8481 30 91 30Check (non-return) valves › Of cast iron or of steel › Other › Mechanical check (non-return) valve for opening and closing of the flow of fuel:<br>-with an operating pressure of not more than 250 mpa,<br>-with a flow rate of 45 cm³/minute or more, but not more than 55 cm³/minute,<br>-with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm,<br>-made of steel<br>2.00 %
8481 30 91 91Check (non-return) valves › Of cast iron or of steel › Other › Steel check (non-return) valves with:<br>- an opening pressure of not more than 800 kpa<br>- an external diameter not more than 37 mm<br>2.00 %
8481 30 91 99Check (non-return) valves › Of cast iron or of steel › Other › Other2.00 %
8481 30 99 00Check (non-return) valves › Other
8481 30 99 20Check (non-return) valves › Other › For use in certain types of aircraft2.00 %
8481 30 99 50Check (non-return) valves › Other › Mechanical check (non-return) valve for opening and closing of the flow of fuel:<br>-with an operating pressure of not more than 250 mpa,<br>-with a flow rate of 45 cm³/minute or more, but not more than 55 cm³/minute,<br>-with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm,<br>-made of steel<br>2.00 %
8481 30 99 90Check (non-return) valves › Other › Other2.00 %
8481 40 00 00Safety or relief valves
8481 40 10 00Safety or relief valves › Of cast iron or of steel
8481 40 10 50Safety or relief valves › Of cast iron or of steel › For use in certain types of aircraft2.00 %
8481 40 10 90Safety or relief valves › Of cast iron or of steel › Other2.00 %
8481 40 90 00Safety or relief valves › Other
8481 40 90 10Safety or relief valves › Other › For use in certain types of aircraft2.00 %
8481 40 90 90Safety or relief valves › Other › Other2.00 %
8481 80 00 00Other appliances
8481 80 11 00Other appliances › Taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures
8481 80 11 00Other appliances › Taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures › Mixing valves
8481 80 11 10Other appliances › Taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures › Mixing valves › For use in certain types of aircraft2.00 %
8481 80 11 90Other appliances › Taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures › Mixing valves › Other2.00 %
8481 80 19 00Other appliances › Taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures › Other
8481 80 19 10Other appliances › Taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures › Other › For use in certain types of aircraft2.00 %
8481 80 19 90Other appliances › Taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures › Other › Other2.00 %
8481 80 31 00Other appliances › Central heating radiator valves
8481 80 31 00Other appliances › Central heating radiator valves › Thermostatic valves2.00 %
8481 80 39 00Other appliances › Central heating radiator valves › Other2.00 %
8481 80 40 00Other appliances › Valves for pneumatic tyres and inner tubes
8481 80 40 10Other appliances › Valves for pneumatic tyres and inner tubes › For use in certain types of aircraft2.00 %
8481 80 40 90Other appliances › Valves for pneumatic tyres and inner tubes › Other2.00 %
8481 80 51 00Other appliances › Other
8481 80 51 00Other appliances › Other › Process control valves
8481 80 51 00Other appliances › Other › Process control valves › Temperature regulators2.00 %
8481 80 59 00Other appliances › Other › Process control valves › Other
8481 80 59 20Other appliances › Other › Process control valves › Other › Pressure regulating valve for incorporation into compressors of motor vehicle air condition units2.00 %
8481 80 59 30Other appliances › Other › Process control valves › Other › Two-way flow control valve with housing, with: - at least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter, - at least 330 cm³/minute, but not more than 5 000 cm³/minute flow rate, - at least 19, but not more than 300 mpa operating pressure2.00 %
8481 80 59 40Other appliances › Other › Process control valves › Other › Flow-control valve<br>- made of steel,<br>- with an outlet hole with a diameter of at least 0,05mm or more, but not more than 0,5 mm,<br>- with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm,<br>- with chromium nitride coating,<br>- with a surface roughness of rp 0,4<br>2.00 %
8481 80 59 50Other appliances › Other › Process control valves › Other › Electromagnetic valve for quantity control with<br>- a plunger,<br>- a solenoid with a of coil resistance of at least 1,85 ohm, but not more than 8,2 ohm2.00 %
8481 80 59 60Other appliances › Other › Process control valves › Other › Electromagnetic valve for quantity control<br>- with a solenoid with a coil resistance of at least 0,19 ohm, but not more than 0,66 ohm, and with an inductance of not more than 1 mh<br>2.00 %
8481 80 59 70Other appliances › Other › Process control valves › Other › Flow-control valve<br>-made of steel,<br>-with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm,<br>-with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm<br>2.00 %
8481 80 59 80Other appliances › Other › Process control valves › Other › Solenoid valve for combustion engine oil pump to regulate the quantity of oil in the pump:<br>-with a cable of length of 550 mm or more but not more than 700 mm incorporating an electrical connector,<br>-with an operating pressure of not more than 5.5 bar,<br>-with an operating voltage of 9 vdc or more but not more than 16 vdc,<br>-with a valve's base width of 22 mm or more but not more than 27 mm,<br>-with a valve's length of 55 mm or more but not more than 110 mm,<br>for use in the manufacture of motor vehicle engines2.00 %
8481 80 59 90Other appliances › Other › Process control valves › Other › Other2.00 %
8481 80 61 00Other appliances › Other › Other
8481 80 61 00Other appliances › Other › Other › Gate valves
8481 80 61 00Other appliances › Other › Other › Gate valves › Of cast iron2.00 %
8481 80 63 00Other appliances › Other › Other › Gate valves › Of steel
8481 80 63 50Other appliances › Other › Other › Gate valves › Of steel › For use in certain types of aircraft2.00 %
8481 80 63 90Other appliances › Other › Other › Gate valves › Of steel › Other2.00 %
8481 80 69 00Other appliances › Other › Other › Gate valves › Other
8481 80 69 50Other appliances › Other › Other › Gate valves › Other › For use in certain types of aircraft2.00 %
8481 80 69 60Other appliances › Other › Other › Gate valves › Other › Other
8481 80 69 60Other appliances › Other › Other › Gate valves › Other › Other › Four-way reversing valve for refrigerants, consisting of:<br>- a solenoid pilot valve<br>- a brass valve body including valve slider and copper connections<br>with a working pressure up to 4,5 mpa2.00 %
8481 80 69 99Other appliances › Other › Other › Gate valves › Other › Other › Other2.00 %
8481 80 71 00Other appliances › Other › Other › Globe valves
8481 80 71 00Other appliances › Other › Other › Globe valves › Of cast iron2.00 %
8481 80 73 00Other appliances › Other › Other › Globe valves › Of steel
8481 80 73 10Other appliances › Other › Other › Globe valves › Of steel › For use in certain types of aircraft2.00 %
8481 80 73 20Other appliances › Other › Other › Globe valves › Of steel › Pressure- and flow-control valve controlled by external electromagnet:<br>- made of steel and/or steel alloy(s),<br>- without integrated circuit,<br>- of not more than 1000 kpa operating pressure,<br>- with a flow quantity of not more than 5 l/min,<br>- without an electromagnet<br>2.00 %
8481 80 73 90Other appliances › Other › Other › Globe valves › Of steel › Other2.00 %
8481 80 79 00Other appliances › Other › Other › Globe valves › Other
8481 80 79 10Other appliances › Other › Other › Globe valves › Other › For use in certain types of aircraft2.00 %
8481 80 79 40Other appliances › Other › Other › Globe valves › Other › Service valve which suits for r410a or r32 gas while connecting indoor and outdoor units with:<br>-a withstanding pressure of the valve body of 6,3 mpa,<br>-a leakage ratio of less than 1.6 g/a,<br>-an impurity ratio of less than 1.2 mg/pcs,<br>-an airtight pressure of the valve body of 4.2 mpa<br>for use in the manufacture of air conditioners2.00 %
8481 80 79 90Other appliances › Other › Other › Globe valves › Other › Other2.00 %
8481 80 81 00Other appliances › Other › Other › Ball and plug valves
8481 80 81 30Other appliances › Other › Other › Ball and plug valves › For use in certain types of aircraft2.00 %
8481 80 81 90Other appliances › Other › Other › Ball and plug valves › Other2.00 %
8481 80 85 00Other appliances › Other › Other › Butterfly valves
8481 80 85 30Other appliances › Other › Other › Butterfly valves › For use in certain types of aircraft2.00 %
8481 80 85 90Other appliances › Other › Other › Butterfly valves › Other2.00 %
8481 80 87 00Other appliances › Other › Other › Diaphragm valves
8481 80 87 30Other appliances › Other › Other › Diaphragm valves › For use in certain types of aircraft2.00 %
8481 80 87 90Other appliances › Other › Other › Diaphragm valves › Other2.00 %
8481 80 99 00Other appliances › Other › Other › Other
8481 80 99 40Other appliances › Other › Other › Other › For use in certain types of aircraft2.00 %
8481 80 99 70Other appliances › Other › Other › Other › Pressure- and flow-control valve controlled by external electromagnet:<br>- made of steel and/or steel alloy(s),<br>- without integrated circuit,<br>- of not more than 1000 kpa operating pressure,<br>- with a flow quantity of not more than 5 l/min,<br>- without an electromagnet<br>2.00 %
8481 80 99 80Other appliances › Other › Other › Other › Solenoid valve for combustion engine continuous variable valve timing system to control oil flow as a function of engine speed and load:<br>-in metal cover,<br>-with electrical connector,<br>-with a force of not more than 10 n,<br>-with an operating voltage of 9 vdc or more but not more than 16 vdc,<br>-with a length of 80 mm or more but not more than 110 mm,<br>-with a width of 80 mm or more but not more than 110 mm,<br>-with a height of 20 mm or more but not more than 30 mm,<br>for use in the manufacture of engines of motor vehicles2.00 %
8481 80 99 90Other appliances › Other › Other › Other › Other2.00 %
8481 90 00 00Parts
8481 90 00 10Parts › For use in certain types of aircraft2.00 %
8481 90 00 25Parts › Die-cast aluminium housing for electronic throttle control or exhaust gas recirculation systems, comprising the following features:<br>-high-pressure die-cast aluminium en ac-46000,<br>-shot-blasted and machined,<br>-height of 100 mm or more but not exceeding 135 mm,<br>-width of 115 mm or more but not exceeding 150 mm,<br>-weight of 210 g or more but not more than 500 g<br>2.00 %
8481 90 00 40Parts › Valve armature:<br>- for the opening and closing of the flow of fuel,<br>- consisting of a shaft and a blade,<br>- with at least 3 but not more than 8 holes on the blade,<br>- made of metal and/or metal alloy(s)<br>2.00 %
8481 90 00 50Parts › Silicone or plastic keyboards, comprising:<br>-parts of common metal, and<br>-whether or not comprising parts of plastic,<br>-epoxy resin reinforced with fiberglass or wood,<br>-whether or not printed or surface-treated,<br>-with or without electrical conductors,<br>-with or without a membrane bonded to the keyboard,<br>-with or without mono or multilayer protective film<br>2.00 %
8481 90 00 60Parts › Nozzle body for the regulation of angle and distribution of fuel injection:<br>-of a cylindrical shape,<br>-made of stainless steel,<br>-with 4 or more, but not more than 16 holes,<br>-with a flow rate of 100 cm³/minute or more, but not more than 500 cm³/minute<br>2.00 %
8481 90 00 70Parts › Nozzle needle for opening and closing the flow of fuel in the engine, with:<br>-2 holes,<br>-4 grooves,<br>-a diameter of 3 mm or more, but not more than 6 mm,<br>-a length of 25 mm or more, but not more than 35 mm,<br>-made of stainless steel with hard-chrome plating<br>2.00 %
8481 90 00 80Parts › Flow-control valve<br>-made of steel,<br>-with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm,<br>-with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm<br>2.00 %
8481 90 00 90Parts › Other2.00 %

Shipping products under this heading?

Paste your product list and get the suggested commodity code and duty rate for every item. The first 3 items are free; a full pack of 100 items is $49, one time, no subscription.

Classify my products

The same heading in the other systems: US HTS code 8481 · EU CN code 8481. Have a code already? Check what a code covers.