Commodity codes by chapter › Chapter 84 › Heading 8414

Commodity code 8414 — Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; gas-tight biological safety cabinets, whether or not fitted with filters

Source: UK Trade Tariff, published by HM Revenue & Customs. The rate shown is the third-country duty rate — the rate that applies when no trade-agreement preference is claimed.

Commodity lines under 8414

Commodity codeDescriptionThird-country duty
8414 10 00 00Vacuum pumps
8414 10 15 00Vacuum pumps › Of a kind used for the manufacture of semiconductors or solely or principally used for the manufacture of flat panel displays0.00 %
8414 10 25 00Vacuum pumps › Other
8414 10 25 00Vacuum pumps › Other › Rotary piston pumps, sliding vane rotary pumps, molecular drag pumps and roots pumps
8414 10 25 10Vacuum pumps › Other › Rotary piston pumps, sliding vane rotary pumps, molecular drag pumps and roots pumps › For use in civil aircraft0.00 %
8414 10 25 30Vacuum pumps › Other › Rotary piston pumps, sliding vane rotary pumps, molecular drag pumps and roots pumps › Tandem pump consisting of:<br>-an oil pump with displacement of 21,6 cc/rev (± 2 cc/rev) and working pressure 1,5 bar at 1 000 revolutions per minute,<br>-vacuum pump with displacement of 120 cc/rev (± 12 cc/rev) and performance of -666 mbar in 6 seconds at 750 revolutions per minute<br>for use in the manufacture of engines of motor vehicles0.00 %
8414 10 25 90Vacuum pumps › Other › Rotary piston pumps, sliding vane rotary pumps, molecular drag pumps and roots pumps › Other0.00 %
8414 10 81 00Vacuum pumps › Other › Other
8414 10 81 00Vacuum pumps › Other › Other › Diffusion pumps, cryopumps and absorption pumps
8414 10 81 10Vacuum pumps › Other › Other › Diffusion pumps, cryopumps and absorption pumps › For use in civil aircraft0.00 %
8414 10 81 90Vacuum pumps › Other › Other › Diffusion pumps, cryopumps and absorption pumps › Other0.00 %
8414 10 89 00Vacuum pumps › Other › Other › Other
8414 10 89 10Vacuum pumps › Other › Other › Other › For use in civil aircraft0.00 %
8414 10 89 90Vacuum pumps › Other › Other › Other › Other0.00 %
8414 20 00 00Hand- or foot-operated air pumps
8414 20 20 00Hand- or foot-operated air pumps › Handpumps for cycles0.00 %
8414 20 80 00Hand- or foot-operated air pumps › Other
8414 20 80 10Hand- or foot-operated air pumps › Other › For use in civil aircraft
8414 20 80 90Hand- or foot-operated air pumps › Other › Other2.00 %
8414 30 00 00Compressors of a kind used in refrigerating equipment
8414 30 20 00Compressors of a kind used in refrigerating equipment › Of a power not exceeding 0,4 kw
8414 30 20 10Compressors of a kind used in refrigerating equipment › Of a power not exceeding 0,4 kw › For use in civil aircraft
8414 30 20 60Compressors of a kind used in refrigerating equipment › Of a power not exceeding 0,4 kw › Hermetic compressor for r290 refrigerant for the production of refrigerators and freezers:<br>-with a power not exceeding 0.4 kw,<br>-pre-filled with lubricant from 190 ml to 210 ml,<br>-suction and processing pipe inner diameter from 6.40 mm to 6.60 mm,<br>-discharge pipe inner diameter from 4.80 mm to 5.00 mm,<br>-driven by a brushless dc motor,<br>-cooling capacity from 340 to 360 w at ashrae lbp 3000 rpm,<br>-displacement from 6.5 cm³ to 7.5 cm³,<br>-speed range from 1,600 rpm to 4,200 rpm<br>2.00 %
8414 30 20 90Compressors of a kind used in refrigerating equipment › Of a power not exceeding 0,4 kw › Other2.00 %
8414 30 81 00Compressors of a kind used in refrigerating equipment › Of a power exceeding 0,4 kw
8414 30 81 00Compressors of a kind used in refrigerating equipment › Of a power exceeding 0,4 kw › Hermetic or semi-hermetic
8414 30 81 10Compressors of a kind used in refrigerating equipment › Of a power exceeding 0,4 kw › Hermetic or semi-hermetic › For use in civil aircraft
8414 30 81 50Compressors of a kind used in refrigerating equipment › Of a power exceeding 0,4 kw › Hermetic or semi-hermetic › Other
8414 30 81 50Compressors of a kind used in refrigerating equipment › Of a power exceeding 0,4 kw › Hermetic or semi-hermetic › Other › Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power rating of 0,5 kw or more but not more than 10 kw, with a displacement volume of not more than 35 cm³, of the type used in refrigeration equipment2.00 %
8414 30 81 60Compressors of a kind used in refrigerating equipment › Of a power exceeding 0,4 kw › Hermetic or semi-hermetic › Other › Hermetic rotary compressors for either hydrofluorocarbon (hfc) or hydrocarbon refrigerants:<br>- driven by ‘on-off’ single phase alternate current (ac) or ‘brushless direct current’ (bldc) variable speed motors,<br>- with a nominal power rating of not more than 1,5kw,<br>- a rated voltage of 100v or more but not more than 240v,<br>- with a height of not more than 300mm,<br>- an external diameter of not more than 150mm,<br>- with a unit weight of not more than 15kg,<br>for use in the manufacture of heat pumps for household appliances, including clothes dryers<br>2.00 %
8414 30 81 89Compressors of a kind used in refrigerating equipment › Of a power exceeding 0,4 kw › Hermetic or semi-hermetic › Other › Other2.00 %
8414 30 89 00Compressors of a kind used in refrigerating equipment › Of a power exceeding 0,4 kw › Other
8414 30 89 10Compressors of a kind used in refrigerating equipment › Of a power exceeding 0,4 kw › Other › For use in civil aircraft
8414 30 89 20Compressors of a kind used in refrigerating equipment › Of a power exceeding 0,4 kw › Other › Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power of more than 0,4 kw but not more than 10 kw2.00 %
8414 30 89 40Compressors of a kind used in refrigerating equipment › Of a power exceeding 0,4 kw › Other › Electrical compressor for motor vehicle air conditioning system:<br>-with a power output of more than 0,4 kw but not exceeding 10 kw,<br>for use in the manufacture of motor vehicles of subheading 8703 402.00 %
8414 30 89 90Compressors of a kind used in refrigerating equipment › Of a power exceeding 0,4 kw › Other › Other2.00 %
8414 40 00 00Air compressors mounted on a wheeled chassis for towing
8414 40 10 00Air compressors mounted on a wheeled chassis for towing › Giving a flow per minute not exceeding 2 m<sup>3</sup>2.00 %
8414 40 90 00Air compressors mounted on a wheeled chassis for towing › Giving a flow per minute exceeding 2 m<sup>3</sup>2.00 %
8414 51 00 00Fans
8414 51 00 00Fans › Table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output not exceeding 125 w
8414 51 00 10Fans › Table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output not exceeding 125 w › For use in civil aircraft0.00 %
8414 51 00 90Fans › Table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output not exceeding 125 w › Other2.00 %
8414 59 00 00Fans › Other
8414 59 15 00Fans › Other › Fans of a kind used solely or principally for cooling microprocessors, telecommunication apparatus, automatic data processing machines or units of automatic data processing machines0.00 %
8414 59 25 00Fans › Other › Other
8414 59 25 00Fans › Other › Other › Axial fans
8414 59 25 10Fans › Other › Other › Axial fans › For use in civil aircraft
8414 59 25 50Fans › Other › Other › Axial fans › Axial fans with built-in motor, for the generation of an air flow for the cooling of compressors and the distribution of air with<br>-a direct current operating voltage of more than 10 v but not more than 14 v, or <br>-an alternating current operating voltage of more than 185 v, but not more than 254 v,<br>-an operating temperature of -40 °c or higher, but not higher than 70 °c,<br>for use in the manufacture of heat pump tumble dryers and refrigerators or freezers2.00 %
8414 59 25 60Fans › Other › Other › Axial fans › Axial fan, for incorporation into instrument clusters, speedometers and infotainment systems of transport vehicles as motor vehicles of headings 8701 to 8705, with:<br>-an air flow of not more than 0,75 m3/min (cubic meter per minute) <br>-an air pressure of not more than 10 mmh2o <br>-an overall acoustic noise of not more than 45 db(a) <br>-a diameter of not more than 65mm <br>equipped with dc brushless motor with: <br>-a rated voltage between: 3 to 16 vdc <br>-an operating voltage between: 3 to 16 vdc <br>-a rated current between: 0,03 to 0,30 a <br>-an input power between: 0,3 to 1,5 w <br>-a rotation speed between: 2500 to 10000 r.p.m,<br>with or without a heat sink incorporated2.00 %
8414 59 25 90Fans › Other › Other › Axial fans › Other2.00 %
8414 59 35 00Fans › Other › Other › Centrifugal fans
8414 59 35 10Fans › Other › Other › Centrifugal fans › For use in civil aircraft
8414 59 35 20Fans › Other › Other › Centrifugal fans › Radial fan, with:<br>-a dimension of 25mm (height) x 85mm (width) x 85mm (depth),<br>-a weight of 120 g,<br>-a rated voltage of 13,6 vdc (direct current voltage),<br>-an operating voltage of 9 vdc or more but not more than 16 vdc (direct current voltage),<br>-a rated current of 1,1 a (typ),<br>-a rated power of 15 w,<br>-a rotation speed of 500 rpm (revolutions per minute) or more but not more than 4800 rpm (revolutions per minute) (free flow),<br>-an air flow of not more than 17,5 litre/s,<br>-an air pressure of not more than16 mm h2o ≈ 157 pa,<br>-an overall sound pressure of not more than 58 db(a) at 4800 rpm (revolutions per minute), and<br>with a fin (fan interconnect network) interface for communication with the heating and air-conditioning control unit used in car seat ventilation systems2.00 %
8414 59 35 30Fans › Other › Other › Centrifugal fans › Electric blower for cooling the high-voltage battery of a hybrid passenger car with:<br>-a control unit,<br>-mosfet inverter,<br>-a voltage of 9 v or more but not more than 16 v,<br>-ambient temperature of - 40 °c or more, but not more than 80 °c,<br>for use in the manufacture of hybrid passenger cars2.00 %
8414 59 35 40Fans › Other › Other › Centrifugal fans › Electric blower for cooling the battery module:<br>-with an operating voltage of 9 vdc or more but not more than 16 vdc,<br>-with a centrifugal electric fan,<br>-with a connector,<br>-with a plastic case,<br>-with or without a control unit for the fan electric motor,<br>for use in the production of rechargeable batteries for hybrid and electric vehicles2.00 %
8414 59 35 50Fans › Other › Other › Centrifugal fans › Dc motor centrifugal fan with:<br>-a nominal voltage of 8 v or more, but not more than 13 v,<br>-a nominal maximum speed of 1400 rpm or more, but not more than 1950 rpm,<br>-a horizontal or vertical position of the fan blades shaft,<br>-a boosting time of not more than 10 seconds,<br>-a cable with a length of 30 cm or more, but not more than 50 cm, with rast 2,5 connector,<br>-a nominal power of 0,7 w or more, but not more than 3,5 w,<br>-a tacho or feedback signal to monitor the speed<br>2.00 %
8414 59 35 90Fans › Other › Other › Centrifugal fans › Other2.00 %
8414 59 95 00Fans › Other › Other › Other
8414 59 95 10Fans › Other › Other › Other › For use in civil aircraft
8414 59 95 90Fans › Other › Other › Other › Other2.00 %
8414 60 00 00Hoods having a maximum horizontal side not exceeding 120 cm2.00 %
8414 70 00 00Gas-tight biological safety cabinets0.00 %
8414 80 00 00Other
8414 80 11 00Other › Turbo-compressors
8414 80 11 00Other › Turbo-compressors › Single-stage
8414 80 11 10Other › Turbo-compressors › Single-stage › For use in civil aircraft
8414 80 11 90Other › Turbo-compressors › Single-stage › Other2.00 %
8414 80 19 00Other › Turbo-compressors › Multi-stage
8414 80 19 10Other › Turbo-compressors › Multi-stage › For use in civil aircraft
8414 80 19 90Other › Turbo-compressors › Multi-stage › Other2.00 %
8414 80 22 00Other › Reciprocating displacement compressors, having a gauge pressure capacity of
8414 80 22 00Other › Reciprocating displacement compressors, having a gauge pressure capacity of › Not exceeding 15 bar, giving a flow per hour
8414 80 22 00Other › Reciprocating displacement compressors, having a gauge pressure capacity of › Not exceeding 15 bar, giving a flow per hour › Not exceeding 60 m<sup>3</sup>
8414 80 22 10Other › Reciprocating displacement compressors, having a gauge pressure capacity of › Not exceeding 15 bar, giving a flow per hour › Not exceeding 60 m<sup>3</sup> › For use in civil aircraft
8414 80 22 20Other › Reciprocating displacement compressors, having a gauge pressure capacity of › Not exceeding 15 bar, giving a flow per hour › Not exceeding 60 m<sup>3</sup> › Air membrane compressor with:<br>- a flow of 4,5 l/min or more, but not more than 12 l/min,<br>- power input of not more than 14 w, and<br>- a gauge pressure capacity not exceeding 400 hpa (0,4 bar) of a kind used in the production of motor vehicle seats2.00 %
8414 80 22 90Other › Reciprocating displacement compressors, having a gauge pressure capacity of › Not exceeding 15 bar, giving a flow per hour › Not exceeding 60 m<sup>3</sup> › Other2.00 %
8414 80 28 00Other › Reciprocating displacement compressors, having a gauge pressure capacity of › Not exceeding 15 bar, giving a flow per hour › Exceeding 60 m<sup>3</sup>
8414 80 28 10Other › Reciprocating displacement compressors, having a gauge pressure capacity of › Not exceeding 15 bar, giving a flow per hour › Exceeding 60 m<sup>3</sup> › For use in civil aircraft
8414 80 28 90Other › Reciprocating displacement compressors, having a gauge pressure capacity of › Not exceeding 15 bar, giving a flow per hour › Exceeding 60 m<sup>3</sup> › Other2.00 %
8414 80 51 00Other › Reciprocating displacement compressors, having a gauge pressure capacity of › Exceeding 15 bar, giving a flow per hour
8414 80 51 00Other › Reciprocating displacement compressors, having a gauge pressure capacity of › Exceeding 15 bar, giving a flow per hour › Not exceeding 120 m<sup>3</sup>
8414 80 51 10Other › Reciprocating displacement compressors, having a gauge pressure capacity of › Exceeding 15 bar, giving a flow per hour › Not exceeding 120 m<sup>3</sup> › For use in civil aircraft
8414 80 51 90Other › Reciprocating displacement compressors, having a gauge pressure capacity of › Exceeding 15 bar, giving a flow per hour › Not exceeding 120 m<sup>3</sup> › Other2.00 %
8414 80 59 00Other › Reciprocating displacement compressors, having a gauge pressure capacity of › Exceeding 15 bar, giving a flow per hour › Exceeding 120 m<sup>3</sup>
8414 80 59 10Other › Reciprocating displacement compressors, having a gauge pressure capacity of › Exceeding 15 bar, giving a flow per hour › Exceeding 120 m<sup>3</sup> › For use in civil aircraft
8414 80 59 90Other › Reciprocating displacement compressors, having a gauge pressure capacity of › Exceeding 15 bar, giving a flow per hour › Exceeding 120 m<sup>3</sup> › Other2.00 %
8414 80 73 00Other › Rotary displacement compressors
8414 80 73 00Other › Rotary displacement compressors › Single-shaft
8414 80 73 10Other › Rotary displacement compressors › Single-shaft › For use in civil aircraft
8414 80 73 30Other › Rotary displacement compressors › Single-shaft › Other
8414 80 73 30Other › Rotary displacement compressors › Single-shaft › Other › Hermetic rotary compressors for either hydrofluorocarbon (hfc) or hydrocarbon refrigerants:<br>- driven by ‘on-off’ single phase alternate current (ac) or ‘brushless direct current’ (bldc) variable speed motors,<br>- with a nominal power rating of not more than 1,5kw,<br>- a rated voltage of 100v or more but not more than 240v,<br>- with a height of not more than 300mm,<br>- an external diameter of not more than 150mm,<br>- with a unit weight of not more than 15kg,<br>for use in the manufacture of heat pumps for household appliances, including clothes dryers2.00 %
8414 80 73 50Other › Rotary displacement compressors › Single-shaft › Other › Hermetic heat pump compressor for r450a or r290 refrigerants:<br>- not charged with refrigerant,<br>- pre-charged with lubricant oil,<br>- with a single phase induction permanent split capacitor motor or a dc brushless motor,<br>- having suction and/or discharge connections,<br>- with a displacement of 8,05 cm3 or more, but not more than 55 cm3,<br>- running at 900 rpm or more, but not more than 7 800 rpm, and<br>- with a cooling capacity of 920 w or more, but not more than 10 440 w in ashrae conditions<br>2.00 %
8414 80 73 89Other › Rotary displacement compressors › Single-shaft › Other › Other2.00 %
8414 80 75 00Other › Rotary displacement compressors › Multi-shaft
8414 80 75 00Other › Rotary displacement compressors › Multi-shaft › Screw compressors
8414 80 75 10Other › Rotary displacement compressors › Multi-shaft › Screw compressors › For use in civil aircraft
8414 80 75 90Other › Rotary displacement compressors › Multi-shaft › Screw compressors › Other2.00 %
8414 80 78 00Other › Rotary displacement compressors › Multi-shaft › Other
8414 80 78 10Other › Rotary displacement compressors › Multi-shaft › Other › For use in civil aircraft
8414 80 78 90Other › Rotary displacement compressors › Multi-shaft › Other › Other2.00 %
8414 80 80 00Other › Other
8414 80 80 10Other › Other › For use in civil aircraft
8414 80 80 90Other › Other › Other2.00 %
8414 90 00 00Parts
8414 90 00 10Parts › For use in civil aircraft
8414 90 00 15Parts › Fan assembly made of aluminium and magnesium alloy:<br>-with an outer diameter of 54 mm or more but not more than 130 mm,<br>-with a height of 8 mm or more but not more than 30 mm,<br>-with two discs connected by blades of involute shape,<br>-with or without dowel, and with or without washer,<br>for use in the manufacture of electromotors2.00 %
8414 90 00 20Parts › Aluminium pistons, for incorporation into compressors of air conditioning machines of motor vehicles2.00 %
8414 90 00 25Parts › Scroll type compressor housing of an aluminium alloy of a kind with: <br>-a heat resistance of 200 °c or more but not more than 250 °c,<br>-one or more fixing points suitable for mounting an actuator,<br>for use in the manufacture of turbochargers2.00 %
8414 90 00 35Parts › Compressor head unit made of impregnated aluminium alloy for installation in air-conditioning compressors for motor vehicles with:<br>-a width of 115 mm or more but not more than 160 mm,<br>-a length of 115 mm or more but not more than 170 mm,<br>-a height of 30 mm or more but not more than 100 mm,<br>-a piece of pressure branch with pipe connection,<br>-one or two mounting holes and<br>-more than one overflowing hole<br>2.00 %
8414 90 00 45Parts › Pressure casted rotor front plate or cover of an electric supercharger:<br>-of en ac-46000 aluminium,<br>-shot-blasted and machined,<br>-with a hardness of 60 or more on the hardness brinell wolfram (hbw) scale (2,5/62,5, according to iso 6506),<br>-with a tensile strength of 240 n/mm2 or more,<br>-with a height of 22 mm or more but not more than 26 mm,<br>-with a diameter of 128 mm or more but not more than 136 mm,<br>-with a weight of 220 g or more but not more than 250 g<br>2.00 %
8414 90 00 55Parts › Air conditioning compressor housing component made of aluminum alloy for installation in electric air conditioning compressors for motor vehicles:<br>-with a width of 100 mm or more but not more than 220 mm,<br>-with a length of 100 mm or more but not more than 230 mm,<br>-with a height of 80 mm or more but not more than 180 mm,<br>-with one single central bore,<br>-machined by cnc milling or unwrought,<br>-whether or not impregnated,<br>-with one suction port or without<br>2.00 %
8414 90 00 80Parts › Turbocharger wheel housing of cast aluminium alloy or cast iron:<br>- with a heat resistance up to 400°c,<br>- with a hole of 30 mm or more but not more than 300 mm for the insertion of the compressor wheel,<br>for use in the automotive industry<br>2.00 %
8414 90 00 90Parts › Other2.00 %

Shipping products under this heading?

Paste your product list and get the suggested commodity code and duty rate for every item. The first 3 items are free; a full pack of 100 items is $49, one time, no subscription.

Classify my products

The same heading in the other systems: US HTS code 8414 · EU CN code 8414. Have a code already? Check what a code covers.