Commodity codes by chapter › Chapter 84 › Heading 8409

Commodity code 8409 — Parts suitable for use solely or principally with the engines of heading 8407 or 8408

Source: UK Trade Tariff, published by HM Revenue & Customs. The rate shown is the third-country duty rate — the rate that applies when no trade-agreement preference is claimed.

Commodity lines under 8409

Commodity codeDescriptionThird-country duty
8409 10 00 00For aircraft engines
8409 10 00 10For aircraft engines › For engines for use in civil aircraft0.00 %
8409 10 00 20For aircraft engines › Intended to be fitted in aircraft imported duty free or built within the community0.00 %
8409 10 00 90For aircraft engines › Other0.00 %
8409 91 00 00Other
8409 91 00 00Other › Suitable for use solely or principally with spark-ignition internal combustion piston engines
8409 91 00 28Other › Suitable for use solely or principally with spark-ignition internal combustion piston engines › Carburetor with :<br>-2 mounting holes with a diameter of 31 mm,<br>-a choke bore diameter of 18 mm or more, but not more than 19,05 mm<br>for use in the manufacture of a two-stroke engine grass trimmer2.00 %
8409 91 00 33Other › Suitable for use solely or principally with spark-ignition internal combustion piston engines › Camshaft carrier for a spark-ignition piston internal combustion engine, made of adc12 aluminium alloy, with:<br>-a weight of 4,0 kg or more but not more than 5,5 kg,<br>-a wall thickness of 2,0 mm or more but not more than 6,0 mm,<br>for use in the manufacture of motor vehicle engines2.00 %
8409 91 00 35Other › Suitable for use solely or principally with spark-ignition internal combustion piston engines › Fuel distribution pipe complete consisting of rail pipe, high pressure sensor and injectors for direct gasoline fuel injection with:<br>-an operating pressure of not more than 22,5 mpa,<br>-solenoid direct injector,<br>-analog pressure sensor for not more than 22,5 mpa2.00 %
8409 91 00 38Other › Suitable for use solely or principally with spark-ignition internal combustion piston engines › Crankcase for 4-cylinder spark-ignition piston internal combustion engine, made of adc12 aluminium alloy, for use in the manufacture of motor vehicle engines2.00 %
8409 91 00 40Other › Suitable for use solely or principally with spark-ignition internal combustion piston engines › Fuel injector with solenoid valve for optimized atomization in the combustion chamber for use in the manufacture of spark-ignition internal combustion piston engines of motor vehicles2.00 %
8409 91 00 45Other › Suitable for use solely or principally with spark-ignition internal combustion piston engines › Metal alloy intake and exhaust valve, with a rockwell hardness hrc 20 or more, for use in the manufacture of spark or compression ignition engines of motor vehicles2.00 %
8409 91 00 50Other › Suitable for use solely or principally with spark-ignition internal combustion piston engines › Exhaust manifold with turbine housing of turbochargers, with a hole to insert a turbine wheel, whereby the hole has a diameter of 28mm or more, but not more than 181mm 2.00 %
8409 91 00 55Other › Suitable for use solely or principally with spark-ignition internal combustion piston engines › Nozzle body for the regulation of angle and distribution of fuel injection:<br>-of a cylindrical shape,<br>-made of stainless steel,<br>-with 4 or more, but not more than 16 holes,<br>-with a flow rate of 100 cm³/minute or more, but not more than 500 cm³/minute<br>2.00 %
8409 91 00 63Other › Suitable for use solely or principally with spark-ignition internal combustion piston engines › Cylinder head blank for a four cylinder engine with 10 cores, made of aluminium alloy en ac-45500, with:<br>- no other components,<br>- a hardness of 90hb or more,<br>- casting defects size of not more than 0,4 mm and not more than 10 defects per cm²,<br>- a dendrite arm space in combustion chamber of not more than 25 μm,<br>- a double deck water jacket design,<br>- a weight of 14 kg or more but not more than 19 kg,<br>- a length of 460 mm or more but not more than 510 mm,<br>- a height of 260 mm or more but not more than 286 mm and<br>- a width of 140 mm or more but not more than 150 mm2.00 %
8409 91 00 75Other › Suitable for use solely or principally with spark-ignition internal combustion piston engines › Housing of fuel injection valve for generating an electromagnetic field to actuate the injection valve with:<br>-an inlet diameter of 2 mm or more, but not more than 10 mm,<br>-an outlet diameter of 2 mm or more, but not more than 10 mm,<br>-an electric coil with a resistance of 10 ω or more, but not more than 15 ω, which ends in an electrical connection,<br>-a plastic covering moulded around a stainless steel tube<br>2.00 %
8409 91 00 80Other › Suitable for use solely or principally with spark-ignition internal combustion piston engines › Nozzle needle for opening and closing the flow of fuel in the engine, with:<br>-2 holes,<br>-4 grooves,<br>-a diameter of 3 mm or more, but not more than 6 mm,<br>-a length of 25 mm or more, but not more than 35 mm,<br>-made of stainless steel with hard-chrome plating<br>2.00 %
8409 91 00 83Other › Suitable for use solely or principally with spark-ignition internal combustion piston engines › Connecting rod for connecting pistons to the crankshaft of a passenger car engine: <br>• made of an alloy containing 96 % steel and the remainder being titanium, vanadium, aluminium, chromium, nickel, copper, phosphorus, silicon, sulphur, manganese,<br>• with two connecting rod bolts,<br>• with a bushing,<br>• of a length of 120 mm or more but not more than 160 mm,<br>• with a surface roughness corresponding to iso 4287-1997,<br>for use in the manufacture of spark ignition motor vehicle engines<br>2.00 %
8409 91 00 90Other › Suitable for use solely or principally with spark-ignition internal combustion piston engines › Other2.00 %
8409 99 00 00Other › Other
8409 99 00 10Other › Other › Injectors with solenoid valve for optimised atomisation in the engine combustion chamber2.00 %
8409 99 00 35Other › Other › The exhaust gas recirculation assembly consisting of:<br>-a control unit,<br>-an air throttle,<br>-an intake pipe,<br>-an outlet hose,<br>for use in the manufacture of compression-ignition combustion engines of motor vehicles2.00 %
8409 99 00 55Other › Other › Exhaust manifold with turbine housing of turbochargers, with a hole to insert a turbine wheel, whereby the hole has a diameter of 28mm or more, but not more than 181mm 2.00 %
8409 99 00 70Other › Other › Metal alloy intake and exhaust valve, with a rockwell hardness hrc 20 or more, for use in the manufacture of spark or compression ignition engines of motor vehicles2.00 %
8409 99 00 75Other › Other › High pressure fuel rail of galvanized ferrite-pearlite steel with:<br>-at least one pressure sensor and one valve,<br>-a length of 314 mm or more but not more than 322 mm,<br>-an operating pressure not more than 225 mpa,<br>-an inlet temperature not more than 95°c,<br>-ambient temperature of -45°c or more but not more than 145°c,<br>for use in the manufacture of compression ignition engines of motor vehicles2.00 %
8409 99 00 90Other › Other › Other2.00 %

Shipping products under this heading?

Paste your product list and get the suggested commodity code and duty rate for every item. The first 3 items are free; a full pack of 100 items is $49, one time, no subscription.

Classify my products

The same heading in the other systems: US HTS code 8409 · EU CN code 8409. Have a code already? Check what a code covers.