Commodity codes by chapter › Chapter 76 › Heading 7607

Commodity code 7607 — Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm

Source: UK Trade Tariff, published by HM Revenue & Customs. The rate shown is the third-country duty rate — the rate that applies when no trade-agreement preference is claimed.

Commodity lines under 7607

Commodity codeDescriptionThird-country duty
7607 11 00 00Not backed
7607 11 00 00Not backed › Rolled but not further worked
7607 11 11 00Not backed › Rolled but not further worked › Of a thickness of less than 0,021 mm
7607 11 11 00Not backed › Rolled but not further worked › Of a thickness of less than 0,021 mm › In rolls of a weight not exceeding 10 kg
7607 11 11 11Not backed › Rolled but not further worked › Of a thickness of less than 0,021 mm › In rolls of a weight not exceeding 10 kg › Of a thickness of 0,007 mm or more but less than 0,021 mm
7607 11 11 11Not backed › Rolled but not further worked › Of a thickness of less than 0,021 mm › In rolls of a weight not exceeding 10 kg › Of a thickness of 0,007 mm or more but less than 0,021 mm › Consigned from thailand7.50 %
7607 11 11 19Not backed › Rolled but not further worked › Of a thickness of less than 0,021 mm › In rolls of a weight not exceeding 10 kg › Of a thickness of 0,007 mm or more but less than 0,021 mm › Other7.50 %
7607 11 11 90Not backed › Rolled but not further worked › Of a thickness of less than 0,021 mm › In rolls of a weight not exceeding 10 kg › Other6.00 %
7607 11 19 00Not backed › Rolled but not further worked › Of a thickness of less than 0,021 mm › Other
7607 11 19 10Not backed › Rolled but not further worked › Of a thickness of less than 0,021 mm › Other › For household use, of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width not exceeding 650 mm6.00 %
7607 11 19 30Not backed › Rolled but not further worked › Of a thickness of less than 0,021 mm › Other › For household use, of a thickness of not less than 0,007 mm and less than 0,008 mm, whether or not annealed6.00 %
7607 11 19 40Not backed › Rolled but not further worked › Of a thickness of less than 0,021 mm › Other › For household use, of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width exceeding 650 mm, whether or not annealed6.00 %
7607 11 19 50Not backed › Rolled but not further worked › Of a thickness of less than 0,021 mm › Other › For household use, of a thickness of more than 0,018 mm and less than 0,021 mm, whether or not annealed6.00 %
7607 11 19 60Not backed › Rolled but not further worked › Of a thickness of less than 0,021 mm › Other › For other uses than household aluminium foil,<br>- of a thickness of not less than 0,007 mm and less than 0,008 mm, whether or not annealed, or,<br>- of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width exceeding 650 mm, whether or not annealed, or,<br>- of a thickness of more than 0,018 mm and less than 0,021 mm, whether or not annealed6.00 %
7607 11 19 91Not backed › Rolled but not further worked › Of a thickness of less than 0,021 mm › Other › Other
7607 11 19 91Not backed › Rolled but not further worked › Of a thickness of less than 0,021 mm › Other › Other › Aluminium converter foil6.00 %
7607 11 19 94Not backed › Rolled but not further worked › Of a thickness of less than 0,021 mm › Other › Other › Household aluminium foil6.00 %
7607 11 19 96Not backed › Rolled but not further worked › Of a thickness of less than 0,021 mm › Other › Other › Other6.00 %
7607 11 90 00Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm
7607 11 90 44Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Aluminium foil in rolls:<br>- having a purity of 99,99 % by weight, <br>- of a thickness of 0,021 mm or more but not more than 0,2 mm, <br>- with a width of 500 mm, <br>- with a surface oxide layer by 3 to 4 nm thick, <br>- and with a cubic texture of more than 95 %
7607 11 90 44Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Aluminium foil in rolls:<br>- having a purity of 99,99 % by weight, <br>- of a thickness of 0,021 mm or more but not more than 0,2 mm, <br>- with a width of 500 mm, <br>- with a surface oxide layer by 3 to 4 nm thick, <br>- and with a cubic texture of more than 95 % › Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers
7607 11 90 44Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Aluminium foil in rolls:<br>- having a purity of 99,99 % by weight, <br>- of a thickness of 0,021 mm or more but not more than 0,2 mm, <br>- with a width of 500 mm, <br>- with a surface oxide layer by 3 to 4 nm thick, <br>- and with a cubic texture of more than 95 % › Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers › Of a thickness of not less than 0,03 mm, without internal layers of other material6.00 %
7607 11 90 46Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Aluminium foil in rolls:<br>- having a purity of 99,99 % by weight, <br>- of a thickness of 0,021 mm or more but not more than 0,2 mm, <br>- with a width of 500 mm, <br>- with a surface oxide layer by 3 to 4 nm thick, <br>- and with a cubic texture of more than 95 % › Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers › Other6.00 %
7607 11 90 48Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Aluminium foil in rolls:<br>- having a purity of 99,99 % by weight, <br>- of a thickness of 0,021 mm or more but not more than 0,2 mm, <br>- with a width of 500 mm, <br>- with a surface oxide layer by 3 to 4 nm thick, <br>- and with a cubic texture of more than 95 % › Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil
7607 11 90 48Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Aluminium foil in rolls:<br>- having a purity of 99,99 % by weight, <br>- of a thickness of 0,021 mm or more but not more than 0,2 mm, <br>- with a width of 500 mm, <br>- with a surface oxide layer by 3 to 4 nm thick, <br>- and with a cubic texture of more than 95 % › Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil › Of a thickness of not less than 0,03 mm, without internal layers of other material6.00 %
7607 11 90 49Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Aluminium foil in rolls:<br>- having a purity of 99,99 % by weight, <br>- of a thickness of 0,021 mm or more but not more than 0,2 mm, <br>- with a width of 500 mm, <br>- with a surface oxide layer by 3 to 4 nm thick, <br>- and with a cubic texture of more than 95 % › Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil › Other6.00 %
7607 11 90 51Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Aluminium foil in rolls:<br>- having a purity of 99,99 % by weight, <br>- of a thickness of 0,021 mm or more but not more than 0,2 mm, <br>- with a width of 500 mm, <br>- with a surface oxide layer by 3 to 4 nm thick, <br>- and with a cubic texture of more than 95 % › Other
7607 11 90 51Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Aluminium foil in rolls:<br>- having a purity of 99,99 % by weight, <br>- of a thickness of 0,021 mm or more but not more than 0,2 mm, <br>- with a width of 500 mm, <br>- with a surface oxide layer by 3 to 4 nm thick, <br>- and with a cubic texture of more than 95 % › Other › Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips6.00 %
7607 11 90 52Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Aluminium foil in rolls:<br>- having a purity of 99,99 % by weight, <br>- of a thickness of 0,021 mm or more but not more than 0,2 mm, <br>- with a width of 500 mm, <br>- with a surface oxide layer by 3 to 4 nm thick, <br>- and with a cubic texture of more than 95 % › Other › Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles
7607 11 90 52Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Aluminium foil in rolls:<br>- having a purity of 99,99 % by weight, <br>- of a thickness of 0,021 mm or more but not more than 0,2 mm, <br>- with a width of 500 mm, <br>- with a surface oxide layer by 3 to 4 nm thick, <br>- and with a cubic texture of more than 95 % › Other › Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles › Without internal layers of other material
7607 11 90 52Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Aluminium foil in rolls:<br>- having a purity of 99,99 % by weight, <br>- of a thickness of 0,021 mm or more but not more than 0,2 mm, <br>- with a width of 500 mm, <br>- with a surface oxide layer by 3 to 4 nm thick, <br>- and with a cubic texture of more than 95 % › Other › Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles › Without internal layers of other material › Alloyed, for use as body panels in the car industry6.00 %
7607 11 90 53Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Aluminium foil in rolls:<br>- having a purity of 99,99 % by weight, <br>- of a thickness of 0,021 mm or more but not more than 0,2 mm, <br>- with a width of 500 mm, <br>- with a surface oxide layer by 3 to 4 nm thick, <br>- and with a cubic texture of more than 95 % › Other › Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles › Without internal layers of other material › Other6.00 %
7607 11 90 54Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Aluminium foil in rolls:<br>- having a purity of 99,99 % by weight, <br>- of a thickness of 0,021 mm or more but not more than 0,2 mm, <br>- with a width of 500 mm, <br>- with a surface oxide layer by 3 to 4 nm thick, <br>- and with a cubic texture of more than 95 % › Other › Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles › Other6.00 %
7607 11 90 56Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Aluminium foil in rolls:<br>- having a purity of 99,99 % by weight, <br>- of a thickness of 0,021 mm or more but not more than 0,2 mm, <br>- with a width of 500 mm, <br>- with a surface oxide layer by 3 to 4 nm thick, <br>- and with a cubic texture of more than 95 % › Other › Other6.00 %
7607 11 90 65Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Plain aluminium foil with the following parameters:<br>- an aluminium content of 99,98 % or more<br>- a thickness of 0,070 mm or more but not more than 0,125 mm<br>- with a cubic texture of a kind used for high voltage etching
7607 11 90 65Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Plain aluminium foil with the following parameters:<br>- an aluminium content of 99,98 % or more<br>- a thickness of 0,070 mm or more but not more than 0,125 mm<br>- with a cubic texture of a kind used for high voltage etching › Plain aluminium foil with the following parameters:<br>-an aluminium content of 99,98 % or more,<br>-a thickness of 0,070 mm or more but not more than 0,125 mm,<br>-with a cubic texture,<br>of a kind used for high voltage etching6.00 %
7607 11 90 67Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Plain aluminium foil with the following parameters:<br>- an aluminium content of 99,98 % or more<br>- a thickness of 0,070 mm or more but not more than 0,125 mm<br>- with a cubic texture of a kind used for high voltage etching › Plain aluminium foil with the following parameters:<br>-an aluminium content of 99,98 % or more,<br>-a thickness of 0,070 mm or more but not more than 0,125 mm,<br>-with a cubic texture,<br>of a kind used for high voltage etching6.00 %
7607 11 90 71Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Other
7607 11 90 71Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Other › Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers
7607 11 90 71Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Other › Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers › Of a thickness of not less than 0,03 mm, without internal layers of other material6.00 %
7607 11 90 72Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Other › Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers › Other6.00 %
7607 11 90 73Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Other › Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil
7607 11 90 73Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Other › Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil › Of a thickness of not less than 0,03 mm, without internal layers of other material6.00 %
7607 11 90 74Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Other › Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil › Other6.00 %
7607 11 90 75Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Other › Aluminium and magnesium alloy strip or foil:<br>- of an alloy conforming to standards 5182-h19 or 5052-h19,<br>- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,<br>- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,<br>- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, <br>- having a camber tolerance of not more than 0,4 mm/750 mm,<br>- of a flatness measurement: i-unit ±4,<br>- having a tensile strength of more than (5182-h19) 365 mpa or (5052-h19) 320 mpa,<br>- of an elongation a50 of more than (5182-h19) 3 % or (5052-h19) 2,5 %<br>for use in the manufacture of slats for blinds<br>
7607 11 90 75Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Other › Aluminium and magnesium alloy strip or foil:<br>- of an alloy conforming to standards 5182-h19 or 5052-h19,<br>- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,<br>- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,<br>- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, <br>- having a camber tolerance of not more than 0,4 mm/750 mm,<br>- of a flatness measurement: i-unit ±4,<br>- having a tensile strength of more than (5182-h19) 365 mpa or (5052-h19) 320 mpa,<br>- of an elongation a50 of more than (5182-h19) 3 % or (5052-h19) 2,5 %<br>for use in the manufacture of slats for blinds<br> › Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips6.00 %
7607 11 90 76Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Other › Aluminium and magnesium alloy strip or foil:<br>- of an alloy conforming to standards 5182-h19 or 5052-h19,<br>- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,<br>- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,<br>- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, <br>- having a camber tolerance of not more than 0,4 mm/750 mm,<br>- of a flatness measurement: i-unit ±4,<br>- having a tensile strength of more than (5182-h19) 365 mpa or (5052-h19) 320 mpa,<br>- of an elongation a50 of more than (5182-h19) 3 % or (5052-h19) 2,5 %<br>for use in the manufacture of slats for blinds<br> › Of a thickness of 0.2 mm
7607 11 90 76Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Other › Aluminium and magnesium alloy strip or foil:<br>- of an alloy conforming to standards 5182-h19 or 5052-h19,<br>- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,<br>- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,<br>- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, <br>- having a camber tolerance of not more than 0,4 mm/750 mm,<br>- of a flatness measurement: i-unit ±4,<br>- having a tensile strength of more than (5182-h19) 365 mpa or (5052-h19) 320 mpa,<br>- of an elongation a50 of more than (5182-h19) 3 % or (5052-h19) 2,5 %<br>for use in the manufacture of slats for blinds<br> › Of a thickness of 0.2 mm › Without internal layers of other material
7607 11 90 76Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Other › Aluminium and magnesium alloy strip or foil:<br>- of an alloy conforming to standards 5182-h19 or 5052-h19,<br>- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,<br>- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,<br>- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, <br>- having a camber tolerance of not more than 0,4 mm/750 mm,<br>- of a flatness measurement: i-unit ±4,<br>- having a tensile strength of more than (5182-h19) 365 mpa or (5052-h19) 320 mpa,<br>- of an elongation a50 of more than (5182-h19) 3 % or (5052-h19) 2,5 %<br>for use in the manufacture of slats for blinds<br> › Of a thickness of 0.2 mm › Without internal layers of other material › For use as body panels in the car industry6.00 %
7607 11 90 77Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Other › Aluminium and magnesium alloy strip or foil:<br>- of an alloy conforming to standards 5182-h19 or 5052-h19,<br>- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,<br>- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,<br>- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, <br>- having a camber tolerance of not more than 0,4 mm/750 mm,<br>- of a flatness measurement: i-unit ±4,<br>- having a tensile strength of more than (5182-h19) 365 mpa or (5052-h19) 320 mpa,<br>- of an elongation a50 of more than (5182-h19) 3 % or (5052-h19) 2,5 %<br>for use in the manufacture of slats for blinds<br> › Of a thickness of 0.2 mm › Without internal layers of other material › Other6.00 %
7607 11 90 78Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Other › Aluminium and magnesium alloy strip or foil:<br>- of an alloy conforming to standards 5182-h19 or 5052-h19,<br>- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,<br>- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,<br>- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, <br>- having a camber tolerance of not more than 0,4 mm/750 mm,<br>- of a flatness measurement: i-unit ±4,<br>- having a tensile strength of more than (5182-h19) 365 mpa or (5052-h19) 320 mpa,<br>- of an elongation a50 of more than (5182-h19) 3 % or (5052-h19) 2,5 %<br>for use in the manufacture of slats for blinds<br> › Of a thickness of 0.2 mm › Other6.00 %
7607 11 90 79Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Other › Aluminium and magnesium alloy strip or foil:<br>- of an alloy conforming to standards 5182-h19 or 5052-h19,<br>- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,<br>- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,<br>- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, <br>- having a camber tolerance of not more than 0,4 mm/750 mm,<br>- of a flatness measurement: i-unit ±4,<br>- having a tensile strength of more than (5182-h19) 365 mpa or (5052-h19) 320 mpa,<br>- of an elongation a50 of more than (5182-h19) 3 % or (5052-h19) 2,5 %<br>for use in the manufacture of slats for blinds<br> › Other6.00 %
7607 11 90 91Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Other › Other
7607 11 90 91Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Other › Other › Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips6.00 %
7607 11 90 92Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Other › Other › Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles
7607 11 90 92Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Other › Other › Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles › Without internal layers of other material
7607 11 90 92Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Other › Other › Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles › Without internal layers of other material › Alloyed, for use as body panels in the car industry6.00 %
7607 11 90 93Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Other › Other › Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles › Without internal layers of other material › Other6.00 %
7607 11 90 94Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Other › Other › Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles › Other6.00 %
7607 11 90 96Not backed › Rolled but not further worked › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Other › Other › Other6.00 %
7607 19 00 00Not backed › Other
7607 19 10 00Not backed › Other › Of a thickness of less than 0,021 mm
7607 19 10 11Not backed › Other › Of a thickness of less than 0,021 mm › Of a thickness of 0,007 mm or more but less than 0,021 mm, in rolls of a weight not exceeding 10 kg, not further worked than rolled, embossed
7607 19 10 11Not backed › Other › Of a thickness of less than 0,021 mm › Of a thickness of 0,007 mm or more but less than 0,021 mm, in rolls of a weight not exceeding 10 kg, not further worked than rolled, embossed › Consigned from thailand7.50 %
7607 19 10 19Not backed › Other › Of a thickness of less than 0,021 mm › Of a thickness of 0,007 mm or more but less than 0,021 mm, in rolls of a weight not exceeding 10 kg, not further worked than rolled, embossed › Other7.50 %
7607 19 10 90Not backed › Other › Of a thickness of less than 0,021 mm › Other6.00 %
7607 19 90 00Not backed › Other › Of a thickness of not less than 0,021 mm but not more than 0,2 mm
7607 19 90 75Not backed › Other › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips6.00 %
7607 19 90 84Not backed › Other › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles
7607 19 90 84Not backed › Other › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles › Without internal layers of other material
7607 19 90 84Not backed › Other › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles › Without internal layers of other material › Alloyed, for use as body panels in the car industry6.00 %
7607 19 90 93Not backed › Other › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles › Without internal layers of other material › Other
7607 19 90 93Not backed › Other › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles › Without internal layers of other material › Other › Hot rolled coils, alloyed, tension levelled, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels6.00 %
7607 19 90 94Not backed › Other › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles › Without internal layers of other material › Other › Other6.00 %
7607 19 90 95Not backed › Other › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles › Other6.00 %
7607 19 90 96Not backed › Other › Of a thickness of not less than 0,021 mm but not more than 0,2 mm › Other6.00 %
7607 20 00 00Backed
7607 20 10 00Backed › Of a thickness (excluding any backing) of less than 0,021 mm10.00 %
7607 20 91 00Backed › Of a thickness (excluding any backing) of not less than 0,021 mm but not more than 0,2 mm
7607 20 91 00Backed › Of a thickness (excluding any backing) of not less than 0,021 mm but not more than 0,2 mm › Aluminium composite panel6.00 %
7607 20 99 00Backed › Of a thickness (excluding any backing) of not less than 0,021 mm but not more than 0,2 mm › Other6.00 %

Shipping products under this heading?

Paste your product list and get the suggested commodity code and duty rate for every item. The first 3 items are free; a full pack of 100 items is $49, one time, no subscription.

Classify my products

The same heading in the other systems: US HTS code 7607 · EU CN code 7607. Have a code already? Check what a code covers.