Commodity codes by chapter › Chapter 73 › Heading 7307

Commodity code 7307 — Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel

Source: UK Trade Tariff, published by HM Revenue & Customs. The rate shown is the third-country duty rate — the rate that applies when no trade-agreement preference is claimed.

Commodity lines under 7307

Commodity codeDescriptionThird-country duty
7307 11 00 00Cast fittings
7307 11 00 00Cast fittings › Of non-malleable cast iron
7307 11 10 00Cast fittings › Of non-malleable cast iron › Of a kind used in pressure systems0.00 %
7307 11 90 00Cast fittings › Of non-malleable cast iron › Other0.00 %
7307 19 00 00Cast fittings › Other
7307 19 10 00Cast fittings › Other › Of cast iron
7307 19 10 03Cast fittings › Other › Of cast iron › Threaded
7307 19 10 03Cast fittings › Other › Of cast iron › Threaded › Of malleable cast iron
7307 19 10 03Cast fittings › Other › Of cast iron › Threaded › Of malleable cast iron › Bodies of compression fittings using iso din 13 metric thread0.00 %
7307 19 10 05Cast fittings › Other › Of cast iron › Threaded › Of malleable cast iron › Circular junction boxes without having a lid0.00 %
7307 19 10 10Cast fittings › Other › Of cast iron › Threaded › Of malleable cast iron › Other0.00 %
7307 19 10 13Cast fittings › Other › Of cast iron › Threaded › Of spheroidal graphite cast iron
7307 19 10 13Cast fittings › Other › Of cast iron › Threaded › Of spheroidal graphite cast iron › Bodies of compression fittings using iso din 13 metric thread0.00 %
7307 19 10 15Cast fittings › Other › Of cast iron › Threaded › Of spheroidal graphite cast iron › Ductile iron clamp tees with rubber sealing and an outlet hole; ductile iron grooved end caps for use on grooved steel pipe with a threaded outlet; ductile iron grooved reducers with threaded end; ductile iron grooved reducing tees with a threaded outlet; ductile iron blanking saddles without threaded outlets used to seal a hole in a tube or pipe0.00 %
7307 19 10 20Cast fittings › Other › Of cast iron › Threaded › Of spheroidal graphite cast iron › Other0.00 %
7307 19 10 30Cast fittings › Other › Of cast iron › Threaded › Other0.00 %
7307 19 10 34Cast fittings › Other › Of cast iron › Unthreaded
7307 19 10 34Cast fittings › Other › Of cast iron › Unthreaded › Of malleable cast iron
7307 19 10 34Cast fittings › Other › Of cast iron › Unthreaded › Of malleable cast iron › Circular junction boxes without having a lid0.00 %
7307 19 10 35Cast fittings › Other › Of cast iron › Unthreaded › Of malleable cast iron › Other0.00 %
7307 19 10 40Cast fittings › Other › Of cast iron › Unthreaded › Of spheroidal graphite cast iron0.00 %
7307 19 10 45Cast fittings › Other › Of cast iron › Unthreaded › Other0.00 %
7307 19 90 00Cast fittings › Other › Other0.00 %
7307 21 00 00Other, of stainless steel
7307 21 00 00Other, of stainless steel › Flanges
7307 21 00 10Other, of stainless steel › Flanges › For use in certain types of aircraft0.00 %
7307 21 00 90Other, of stainless steel › Flanges › Other0.00 %
7307 22 00 00Other, of stainless steel › Threaded elbows, bends and sleeves
7307 22 10 00Other, of stainless steel › Threaded elbows, bends and sleeves › Sleeves0.00 %
7307 22 90 00Other, of stainless steel › Threaded elbows, bends and sleeves › Elbows and bends
7307 22 90 10Other, of stainless steel › Threaded elbows, bends and sleeves › Elbows and bends › For use in certain types of aircraft0.00 %
7307 22 90 90Other, of stainless steel › Threaded elbows, bends and sleeves › Elbows and bends › Other0.00 %
7307 23 00 00Other, of stainless steel › Butt welding fittings
7307 23 10 00Other, of stainless steel › Butt welding fittings › Elbows and bends
7307 23 10 35Other, of stainless steel › Butt welding fittings › Elbows and bends › Of austenitic stainless steel grades, corresponding to aisi types 304, 304l, 316, 316l, 316ti, 321 and 321h and their equivalent in the other norms, with a greatest external diameter not exceeding 406.4 mm and a wall thickness of 16 mm or less, with a roughness average (ra) of the internal surface not less than 0.8 micrometres, not flanged, whether or not finished
7307 23 10 35Other, of stainless steel › Butt welding fittings › Elbows and bends › Of austenitic stainless steel grades, corresponding to aisi types 304, 304l, 316, 316l, 316ti, 321 and 321h and their equivalent in the other norms, with a greatest external diameter not exceeding 406.4 mm and a wall thickness of 16 mm or less, with a roughness average (ra) of the internal surface not less than 0.8 micrometres, not flanged, whether or not finished › Consigned from malaysia
7307 23 10 35Other, of stainless steel › Butt welding fittings › Elbows and bends › Of austenitic stainless steel grades, corresponding to aisi types 304, 304l, 316, 316l, 316ti, 321 and 321h and their equivalent in the other norms, with a greatest external diameter not exceeding 406.4 mm and a wall thickness of 16 mm or less, with a roughness average (ra) of the internal surface not less than 0.8 micrometres, not flanged, whether or not finished › Consigned from malaysia › For use in certain types of aircraft0.00 %
7307 23 10 40Other, of stainless steel › Butt welding fittings › Elbows and bends › Of austenitic stainless steel grades, corresponding to aisi types 304, 304l, 316, 316l, 316ti, 321 and 321h and their equivalent in the other norms, with a greatest external diameter not exceeding 406.4 mm and a wall thickness of 16 mm or less, with a roughness average (ra) of the internal surface not less than 0.8 micrometres, not flanged, whether or not finished › Consigned from malaysia › Other0.00 %
7307 23 10 50Other, of stainless steel › Butt welding fittings › Elbows and bends › Of austenitic stainless steel grades, corresponding to aisi types 304, 304l, 316, 316l, 316ti, 321 and 321h and their equivalent in the other norms, with a greatest external diameter not exceeding 406.4 mm and a wall thickness of 16 mm or less, with a roughness average (ra) of the internal surface not less than 0.8 micrometres, not flanged, whether or not finished › Other
7307 23 10 50Other, of stainless steel › Butt welding fittings › Elbows and bends › Of austenitic stainless steel grades, corresponding to aisi types 304, 304l, 316, 316l, 316ti, 321 and 321h and their equivalent in the other norms, with a greatest external diameter not exceeding 406.4 mm and a wall thickness of 16 mm or less, with a roughness average (ra) of the internal surface not less than 0.8 micrometres, not flanged, whether or not finished › Other › For use in certain types of aircraft0.00 %
7307 23 10 55Other, of stainless steel › Butt welding fittings › Elbows and bends › Of austenitic stainless steel grades, corresponding to aisi types 304, 304l, 316, 316l, 316ti, 321 and 321h and their equivalent in the other norms, with a greatest external diameter not exceeding 406.4 mm and a wall thickness of 16 mm or less, with a roughness average (ra) of the internal surface not less than 0.8 micrometres, not flanged, whether or not finished › Other › Other0.00 %
7307 23 10 80Other, of stainless steel › Butt welding fittings › Elbows and bends › Other
7307 23 10 80Other, of stainless steel › Butt welding fittings › Elbows and bends › Other › For use in certain types of aircraft0.00 %
7307 23 10 85Other, of stainless steel › Butt welding fittings › Elbows and bends › Other › Other0.00 %
7307 23 90 00Other, of stainless steel › Butt welding fittings › Other
7307 23 90 35Other, of stainless steel › Butt welding fittings › Other › Of austenitic stainless steel grades, corresponding to aisi types 304, 304l, 316, 316l, 316ti, 321 and 321h and their equivalent in the other norms, with a greatest external diameter not exceeding 406.4 mm and a wall thickness of 16 mm or less, with a roughness average (ra) of the internal surface not less than 0.8 micrometres, not flanged, whether or not finished
7307 23 90 35Other, of stainless steel › Butt welding fittings › Other › Of austenitic stainless steel grades, corresponding to aisi types 304, 304l, 316, 316l, 316ti, 321 and 321h and their equivalent in the other norms, with a greatest external diameter not exceeding 406.4 mm and a wall thickness of 16 mm or less, with a roughness average (ra) of the internal surface not less than 0.8 micrometres, not flanged, whether or not finished › Consigned from malaysia
7307 23 90 35Other, of stainless steel › Butt welding fittings › Other › Of austenitic stainless steel grades, corresponding to aisi types 304, 304l, 316, 316l, 316ti, 321 and 321h and their equivalent in the other norms, with a greatest external diameter not exceeding 406.4 mm and a wall thickness of 16 mm or less, with a roughness average (ra) of the internal surface not less than 0.8 micrometres, not flanged, whether or not finished › Consigned from malaysia › For use in certain types of aircraft0.00 %
7307 23 90 40Other, of stainless steel › Butt welding fittings › Other › Of austenitic stainless steel grades, corresponding to aisi types 304, 304l, 316, 316l, 316ti, 321 and 321h and their equivalent in the other norms, with a greatest external diameter not exceeding 406.4 mm and a wall thickness of 16 mm or less, with a roughness average (ra) of the internal surface not less than 0.8 micrometres, not flanged, whether or not finished › Consigned from malaysia › Other0.00 %
7307 23 90 50Other, of stainless steel › Butt welding fittings › Other › Of austenitic stainless steel grades, corresponding to aisi types 304, 304l, 316, 316l, 316ti, 321 and 321h and their equivalent in the other norms, with a greatest external diameter not exceeding 406.4 mm and a wall thickness of 16 mm or less, with a roughness average (ra) of the internal surface not less than 0.8 micrometres, not flanged, whether or not finished › Other
7307 23 90 50Other, of stainless steel › Butt welding fittings › Other › Of austenitic stainless steel grades, corresponding to aisi types 304, 304l, 316, 316l, 316ti, 321 and 321h and their equivalent in the other norms, with a greatest external diameter not exceeding 406.4 mm and a wall thickness of 16 mm or less, with a roughness average (ra) of the internal surface not less than 0.8 micrometres, not flanged, whether or not finished › Other › For use in certain types of aircraft0.00 %
7307 23 90 55Other, of stainless steel › Butt welding fittings › Other › Of austenitic stainless steel grades, corresponding to aisi types 304, 304l, 316, 316l, 316ti, 321 and 321h and their equivalent in the other norms, with a greatest external diameter not exceeding 406.4 mm and a wall thickness of 16 mm or less, with a roughness average (ra) of the internal surface not less than 0.8 micrometres, not flanged, whether or not finished › Other › Other0.00 %
7307 23 90 80Other, of stainless steel › Butt welding fittings › Other › Other
7307 23 90 80Other, of stainless steel › Butt welding fittings › Other › Other › For use in certain types of aircraft0.00 %
7307 23 90 85Other, of stainless steel › Butt welding fittings › Other › Other › Other0.00 %
7307 29 00 00Other, of stainless steel › Other
7307 29 10 00Other, of stainless steel › Other › Threaded
7307 29 10 10Other, of stainless steel › Other › Threaded › For use in certain types of aircraft0.00 %
7307 29 10 90Other, of stainless steel › Other › Threaded › Other0.00 %
7307 29 80 00Other, of stainless steel › Other › Other
7307 29 80 10Other, of stainless steel › Other › Other › For use in certain types of aircraft0.00 %
7307 29 80 90Other, of stainless steel › Other › Other › Other0.00 %
7307 91 00 00Other
7307 91 00 00Other › Flanges
7307 91 00 10Other › Flanges › For use in certain types of aircraft0.00 %
7307 91 00 90Other › Flanges › Other0.00 %
7307 92 00 00Other › Threaded elbows, bends and sleeves
7307 92 10 00Other › Threaded elbows, bends and sleeves › Sleeves0.00 %
7307 92 90 00Other › Threaded elbows, bends and sleeves › Elbows and bends
7307 92 90 10Other › Threaded elbows, bends and sleeves › Elbows and bends › For use in certain types of aircraft0.00 %
7307 92 90 90Other › Threaded elbows, bends and sleeves › Elbows and bends › Other0.00 %
7307 93 00 00Other › Butt welding fittings
7307 93 11 00Other › Butt welding fittings › With greatest external diameter not exceeding 609,6 mm
7307 93 11 00Other › Butt welding fittings › With greatest external diameter not exceeding 609,6 mm › Elbows and bends
7307 93 11 11Other › Butt welding fittings › With greatest external diameter not exceeding 609,6 mm › Elbows and bends › For use in certain types of aircraft
7307 93 11 11Other › Butt welding fittings › With greatest external diameter not exceeding 609,6 mm › Elbows and bends › For use in certain types of aircraft › Consigned from taiwan, indonesia, sri lanka or the philippines0.00 %
7307 93 11 19Other › Butt welding fittings › With greatest external diameter not exceeding 609,6 mm › Elbows and bends › For use in certain types of aircraft › Other0.00 %
7307 93 11 30Other › Butt welding fittings › With greatest external diameter not exceeding 609,6 mm › Elbows and bends › Other
7307 93 11 30Other › Butt welding fittings › With greatest external diameter not exceeding 609,6 mm › Elbows and bends › Other › Other threaded fittings0.00 %
7307 93 11 91Other › Butt welding fittings › With greatest external diameter not exceeding 609,6 mm › Elbows and bends › Other › Other
7307 93 11 91Other › Butt welding fittings › With greatest external diameter not exceeding 609,6 mm › Elbows and bends › Other › Other › Consigned from taiwan0.00 %
7307 93 11 93Other › Butt welding fittings › With greatest external diameter not exceeding 609,6 mm › Elbows and bends › Other › Other › Consigned from indonesia0.00 %
7307 93 11 94Other › Butt welding fittings › With greatest external diameter not exceeding 609,6 mm › Elbows and bends › Other › Other › Consigned from sri lanka0.00 %
7307 93 11 95Other › Butt welding fittings › With greatest external diameter not exceeding 609,6 mm › Elbows and bends › Other › Other › Consigned from the philippines0.00 %
7307 93 11 99Other › Butt welding fittings › With greatest external diameter not exceeding 609,6 mm › Elbows and bends › Other › Other › Other0.00 %
7307 93 19 00Other › Butt welding fittings › With greatest external diameter not exceeding 609,6 mm › Other
7307 93 19 11Other › Butt welding fittings › With greatest external diameter not exceeding 609,6 mm › Other › For use in certain types of aircraft
7307 93 19 11Other › Butt welding fittings › With greatest external diameter not exceeding 609,6 mm › Other › For use in certain types of aircraft › Consigned from taiwan, indonesia, sri lanka or the philippines0.00 %
7307 93 19 19Other › Butt welding fittings › With greatest external diameter not exceeding 609,6 mm › Other › For use in certain types of aircraft › Other0.00 %
7307 93 19 30Other › Butt welding fittings › With greatest external diameter not exceeding 609,6 mm › Other › Other
7307 93 19 30Other › Butt welding fittings › With greatest external diameter not exceeding 609,6 mm › Other › Other › Other threaded fittings0.00 %
7307 93 19 91Other › Butt welding fittings › With greatest external diameter not exceeding 609,6 mm › Other › Other › Other
7307 93 19 91Other › Butt welding fittings › With greatest external diameter not exceeding 609,6 mm › Other › Other › Other › Consigned from taiwan0.00 %
7307 93 19 93Other › Butt welding fittings › With greatest external diameter not exceeding 609,6 mm › Other › Other › Other › Consigned from indonesia0.00 %
7307 93 19 94Other › Butt welding fittings › With greatest external diameter not exceeding 609,6 mm › Other › Other › Other › Consigned from sri lanka0.00 %
7307 93 19 95Other › Butt welding fittings › With greatest external diameter not exceeding 609,6 mm › Other › Other › Other › Consigned from the philippines0.00 %
7307 93 19 99Other › Butt welding fittings › With greatest external diameter not exceeding 609,6 mm › Other › Other › Other › Other0.00 %
7307 93 91 00Other › Butt welding fittings › With greatest external diameter exceeding 609,6 mm
7307 93 91 00Other › Butt welding fittings › With greatest external diameter exceeding 609,6 mm › Elbows and bends
7307 93 91 10Other › Butt welding fittings › With greatest external diameter exceeding 609,6 mm › Elbows and bends › For use in certain types of aircraft0.00 %
7307 93 91 90Other › Butt welding fittings › With greatest external diameter exceeding 609,6 mm › Elbows and bends › Other0.00 %
7307 93 99 00Other › Butt welding fittings › With greatest external diameter exceeding 609,6 mm › Other
7307 93 99 10Other › Butt welding fittings › With greatest external diameter exceeding 609,6 mm › Other › For use in certain types of aircraft0.00 %
7307 93 99 90Other › Butt welding fittings › With greatest external diameter exceeding 609,6 mm › Other › Other0.00 %
7307 99 00 00Other › Other
7307 99 10 00Other › Other › Threaded
7307 99 10 10Other › Other › Threaded › For use in certain types of aircraft0.00 %
7307 99 10 90Other › Other › Threaded › Other0.00 %
7307 99 80 00Other › Other › Other
7307 99 80 11Other › Other › Other › For use in certain types of aircraft
7307 99 80 11Other › Other › Other › For use in certain types of aircraft › With greatest external diameter not exceeding 609,6 mm
7307 99 80 11Other › Other › Other › For use in certain types of aircraft › With greatest external diameter not exceeding 609,6 mm › Consigned from taiwan, indonesia, sri lanka or the philippines0.00 %
7307 99 80 19Other › Other › Other › For use in certain types of aircraft › With greatest external diameter not exceeding 609,6 mm › Other0.00 %
7307 99 80 20Other › Other › Other › For use in certain types of aircraft › Other0.00 %
7307 99 80 92Other › Other › Other › Other
7307 99 80 92Other › Other › Other › Other › With greatest external diameter not exceeding 609,6 mm
7307 99 80 92Other › Other › Other › Other › With greatest external diameter not exceeding 609,6 mm › Consigned from taiwan0.00 %
7307 99 80 93Other › Other › Other › Other › With greatest external diameter not exceeding 609,6 mm › Consigned from indonesia0.00 %
7307 99 80 94Other › Other › Other › Other › With greatest external diameter not exceeding 609,6 mm › Consigned from sri lanka0.00 %
7307 99 80 95Other › Other › Other › Other › With greatest external diameter not exceeding 609,6 mm › Consigned from the philippines0.00 %
7307 99 80 98Other › Other › Other › Other › With greatest external diameter not exceeding 609,6 mm › Other0.00 %
7307 99 80 99Other › Other › Other › Other › Other0.00 %

Shipping products under this heading?

Paste your product list and get the suggested commodity code and duty rate for every item. The first 3 items are free; a full pack of 100 items is $49, one time, no subscription.

Classify my products

The same heading in the other systems: US HTS code 7307 · EU CN code 7307. Have a code already? Check what a code covers.