Commodity codes by chapter › Chapter 72 › Heading 7225

Commodity code 7225 — Flat-rolled products of other alloy steel, of a width of 600 mm or more

Source: UK Trade Tariff, published by HM Revenue & Customs. The rate shown is the third-country duty rate — the rate that applies when no trade-agreement preference is claimed.

Commodity lines under 7225

Commodity codeDescriptionThird-country duty
7225 11 00 00Of silicon-electrical steel
7225 11 00 00Of silicon-electrical steel › Grain-oriented
7225 11 00 11Of silicon-electrical steel › Grain-oriented › Of a thickness exceeding 0,16 mm
7225 11 00 11Of silicon-electrical steel › Grain-oriented › Of a thickness exceeding 0,16 mm › With a maximum core loss not higher than 0.9 w/kg
7225 11 00 11Of silicon-electrical steel › Grain-oriented › Of a thickness exceeding 0,16 mm › With a maximum core loss not higher than 0.9 w/kg › With a maximum core loss not higher than 0.7 w/kg0.00 %
7225 11 00 12Of silicon-electrical steel › Grain-oriented › Of a thickness exceeding 0,16 mm › With a maximum core loss not higher than 0.9 w/kg › With a maximum core loss higher than 0.7 w/kg but not higher than 0,9 w/kg0.00 %
7225 11 00 15Of silicon-electrical steel › Grain-oriented › Of a thickness exceeding 0,16 mm › With a maximum core loss higher than 0.9 w/kg but not higher than 1,05 w/kg0.00 %
7225 11 00 19Of silicon-electrical steel › Grain-oriented › Of a thickness exceeding 0,16 mm › With a maximum core loss higher than 1,05 w/kg0.00 %
7225 11 00 90Of silicon-electrical steel › Grain-oriented › Other0.00 %
7225 19 00 00Of silicon-electrical steel › Other
7225 19 10 00Of silicon-electrical steel › Other › Hot-rolled
7225 19 10 10Of silicon-electrical steel › Other › Hot-rolled › Products clad, plated or coated, not in coils, without patterns in relief, of a thickness exceeding 10 mm and products clad, plated or coated, not in coils, without patterns in relief, of a thickness of 4,75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more50.00 %
7225 19 10 90Of silicon-electrical steel › Other › Hot-rolled › Other50.00 %
7225 19 90 00Of silicon-electrical steel › Other › Cold-rolled0.00 %
7225 30 00 00Other, not further worked than hot-rolled, in coils
7225 30 10 00Other, not further worked than hot-rolled, in coils › Of tool steel50.00 %
7225 30 30 00Other, not further worked than hot-rolled, in coils › Of high-speed steel
7225 30 30 10Other, not further worked than hot-rolled, in coils › Of high-speed steel › Not further worked than rolled; not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)50.00 %
7225 30 30 90Other, not further worked than hot-rolled, in coils › Of high-speed steel › Other50.00 %
7225 30 90 00Other, not further worked than hot-rolled, in coils › Other50.00 %
7225 40 00 00Other, not further worked than hot-rolled, not in coils
7225 40 12 00Other, not further worked than hot-rolled, not in coils › Of tool steel
7225 40 12 30Other, not further worked than hot-rolled, not in coils › Of tool steel › Of a thickness of less than 4,75 mm50.00 %
7225 40 12 90Other, not further worked than hot-rolled, not in coils › Of tool steel › Other50.00 %
7225 40 15 00Other, not further worked than hot-rolled, not in coils › Of high-speed steel
7225 40 15 10Other, not further worked than hot-rolled, not in coils › Of high-speed steel › Not further worked than rolled; not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)50.00 %
7225 40 15 90Other, not further worked than hot-rolled, not in coils › Of high-speed steel › Other50.00 %
7225 40 40 00Other, not further worked than hot-rolled, not in coils › Other
7225 40 40 00Other, not further worked than hot-rolled, not in coils › Other › Of a thickness exceeding 10 mm50.00 %
7225 40 60 00Other, not further worked than hot-rolled, not in coils › Other › Of a thickness of 4,75 mm or more but not exceeding 10 mm
7225 40 60 10Other, not further worked than hot-rolled, not in coils › Other › Of a thickness of 4,75 mm or more but not exceeding 10 mm › Of a width of 2 050 mm or more50.00 %
7225 40 60 90Other, not further worked than hot-rolled, not in coils › Other › Of a thickness of 4,75 mm or more but not exceeding 10 mm › Other50.00 %
7225 40 90 00Other, not further worked than hot-rolled, not in coils › Other › Of a thickness of less than 4,75 mm50.00 %
7225 50 00 00Other, not further worked than cold-rolled (cold-reduced)
7225 50 20 00Other, not further worked than cold-rolled (cold-reduced) › Of high-speed steel
7225 50 20 10Other, not further worked than cold-rolled (cold-reduced) › Of high-speed steel › Not further worked than rolled; not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)0.00 %
7225 50 20 90Other, not further worked than cold-rolled (cold-reduced) › Of high-speed steel › Other0.00 %
7225 50 80 00Other, not further worked than cold-rolled (cold-reduced) › Other0.00 %
7225 91 00 00Other
7225 91 00 00Other › Electrolytically plated or coated with zinc
7225 91 00 10Other › Electrolytically plated or coated with zinc › Not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)50.00 %
7225 91 00 90Other › Electrolytically plated or coated with zinc › Other50.00 %
7225 92 00 00Other › Otherwise plated or coated with zinc
7225 92 00 20Other › Otherwise plated or coated with zinc › Not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)
7225 92 00 20Other › Otherwise plated or coated with zinc › Not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square) › Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips50.00 %
7225 92 00 30Other › Otherwise plated or coated with zinc › Not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square) › Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips50.00 %
7225 92 00 80Other › Otherwise plated or coated with zinc › Not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square) › Other50.00 %
7225 92 00 90Other › Otherwise plated or coated with zinc › Other50.00 %
7225 99 00 00Other › Other
7225 99 00 11Other › Other › Not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)
7225 99 00 11Other › Other › Not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square) › Painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin50.00 %
7225 99 00 22Other › Other › Not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square) › Other, aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips50.00 %
7225 99 00 23Other › Other › Not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square) › Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips50.00 %
7225 99 00 25Other › Other › Not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square) › Other50.00 %
7225 99 00 41Other › Other › Other, of a thickness exceeding 10 mm or of a thickness of 4,75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more
7225 99 00 41Other › Other › Other, of a thickness exceeding 10 mm or of a thickness of 4,75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more › Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips50.00 %
7225 99 00 45Other › Other › Other, of a thickness exceeding 10 mm or of a thickness of 4,75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more › Other50.00 %
7225 99 00 91Other › Other › Other
7225 99 00 91Other › Other › Other › Painted, varnished or coated with plastics on at least one side, excluding so-called "sandwich panels" of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin50.00 %
7225 99 00 92Other › Other › Other › Other, aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips50.00 %
7225 99 00 93Other › Other › Other › Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips50.00 %
7225 99 00 95Other › Other › Other › Other50.00 %

Shipping products under this heading?

Paste your product list and get the suggested commodity code and duty rate for every item. The first 3 items are free; a full pack of 100 items is $49, one time, no subscription.

Classify my products

The same heading in the other systems: US HTS code 7225 · EU CN code 7225. Have a code already? Check what a code covers.