Commodity codes by chapter › Chapter 72 › Heading 7211

Commodity code 7211 — Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated

Source: UK Trade Tariff, published by HM Revenue & Customs. The rate shown is the third-country duty rate — the rate that applies when no trade-agreement preference is claimed.

Commodity lines under 7211

Commodity codeDescriptionThird-country duty
7211 13 00 00Not further worked than hot-rolled
7211 13 00 00Not further worked than hot-rolled › Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
7211 13 00 11Not further worked than hot-rolled › Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief › Of a width not exceeding 350 mm and of a thickness of 50 mm or more50.00 %
7211 13 00 19Not further worked than hot-rolled › Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief › Other50.00 %
7211 14 00 00Not further worked than hot-rolled › Other, of a thickness of 4,75 mm or more
7211 14 00 10Not further worked than hot-rolled › Other, of a thickness of 4,75 mm or more › Of a width exceeding 500 mm50.00 %
7211 14 00 91Not further worked than hot-rolled › Other, of a thickness of 4,75 mm or more › Of a width not exceeding 500 mm
7211 14 00 91Not further worked than hot-rolled › Other, of a thickness of 4,75 mm or more › Of a width not exceeding 500 mm › Of a width not exceeding 350 mm and of a thickness of 50 mm or more50.00 %
7211 14 00 95Not further worked than hot-rolled › Other, of a thickness of 4,75 mm or more › Of a width not exceeding 500 mm › Other50.00 %
7211 19 00 00Not further worked than hot-rolled › Other
7211 19 00 10Not further worked than hot-rolled › Other › Of a width exceeding 500 mm50.00 %
7211 19 00 91Not further worked than hot-rolled › Other › Of a width not exceeding 500 mm
7211 19 00 91Not further worked than hot-rolled › Other › Of a width not exceeding 500 mm › Of a width not exceeding 350 mm and of a thickness of 50 mm or more50.00 %
7211 19 00 95Not further worked than hot-rolled › Other › Of a width not exceeding 500 mm › Other50.00 %
7211 23 00 00Not further worked than cold-rolled (cold-reduced)
7211 23 00 00Not further worked than cold-rolled (cold-reduced) › Containing by weight less than 0,25 % of carbon
7211 23 20 00Not further worked than cold-rolled (cold-reduced) › Containing by weight less than 0,25 % of carbon › 'electrical'
7211 23 20 10Not further worked than cold-rolled (cold-reduced) › Containing by weight less than 0,25 % of carbon › 'electrical' › Of a width exceeding 500 mm0.00 %
7211 23 20 90Not further worked than cold-rolled (cold-reduced) › Containing by weight less than 0,25 % of carbon › 'electrical' › Of a width not exceeding 500 mm0.00 %
7211 23 30 00Not further worked than cold-rolled (cold-reduced) › Containing by weight less than 0,25 % of carbon › Other
7211 23 30 00Not further worked than cold-rolled (cold-reduced) › Containing by weight less than 0,25 % of carbon › Other › Of a thickness of 0,35 mm or more
7211 23 30 10Not further worked than cold-rolled (cold-reduced) › Containing by weight less than 0,25 % of carbon › Other › Of a thickness of 0,35 mm or more › Of a width exceeding 500 mm0.00 %
7211 23 30 91Not further worked than cold-rolled (cold-reduced) › Containing by weight less than 0,25 % of carbon › Other › Of a thickness of 0,35 mm or more › Of a width not exceeding 500 mm
7211 23 30 91Not further worked than cold-rolled (cold-reduced) › Containing by weight less than 0,25 % of carbon › Other › Of a thickness of 0,35 mm or more › Of a width not exceeding 500 mm › In coils intended for the manufacture of tinplate0.00 %
7211 23 30 99Not further worked than cold-rolled (cold-reduced) › Containing by weight less than 0,25 % of carbon › Other › Of a thickness of 0,35 mm or more › Of a width not exceeding 500 mm › Other0.00 %
7211 23 80 00Not further worked than cold-rolled (cold-reduced) › Containing by weight less than 0,25 % of carbon › Other › Of a thickness of less than 0,35 mm
7211 23 80 11Not further worked than cold-rolled (cold-reduced) › Containing by weight less than 0,25 % of carbon › Other › Of a thickness of less than 0,35 mm › Of a width exceeding 500 mm
7211 23 80 11Not further worked than cold-rolled (cold-reduced) › Containing by weight less than 0,25 % of carbon › Other › Of a thickness of less than 0,35 mm › Of a width exceeding 500 mm › In coils, annealed (known as 'black plates')0.00 %
7211 23 80 19Not further worked than cold-rolled (cold-reduced) › Containing by weight less than 0,25 % of carbon › Other › Of a thickness of less than 0,35 mm › Of a width exceeding 500 mm › Other0.00 %
7211 23 80 93Not further worked than cold-rolled (cold-reduced) › Containing by weight less than 0,25 % of carbon › Other › Of a thickness of less than 0,35 mm › Of a width not exceeding 500 mm
7211 23 80 93Not further worked than cold-rolled (cold-reduced) › Containing by weight less than 0,25 % of carbon › Other › Of a thickness of less than 0,35 mm › Of a width not exceeding 500 mm › In coils intended for the manufacture of tinplate
7211 23 80 93Not further worked than cold-rolled (cold-reduced) › Containing by weight less than 0,25 % of carbon › Other › Of a thickness of less than 0,35 mm › Of a width not exceeding 500 mm › In coils intended for the manufacture of tinplate › Annealed (known as 'black plates')0.00 %
7211 23 80 95Not further worked than cold-rolled (cold-reduced) › Containing by weight less than 0,25 % of carbon › Other › Of a thickness of less than 0,35 mm › Of a width not exceeding 500 mm › In coils intended for the manufacture of tinplate › Other0.00 %
7211 23 80 97Not further worked than cold-rolled (cold-reduced) › Containing by weight less than 0,25 % of carbon › Other › Of a thickness of less than 0,35 mm › Of a width not exceeding 500 mm › Other
7211 23 80 97Not further worked than cold-rolled (cold-reduced) › Containing by weight less than 0,25 % of carbon › Other › Of a thickness of less than 0,35 mm › Of a width not exceeding 500 mm › Other › In coils, annealed (known as 'black plates')0.00 %
7211 23 80 99Not further worked than cold-rolled (cold-reduced) › Containing by weight less than 0,25 % of carbon › Other › Of a thickness of less than 0,35 mm › Of a width not exceeding 500 mm › Other › Other0.00 %
7211 29 00 00Not further worked than cold-rolled (cold-reduced) › Other
7211 29 00 11Not further worked than cold-rolled (cold-reduced) › Other › Of a width exceeding 500 mm
7211 29 00 11Not further worked than cold-rolled (cold-reduced) › Other › Of a width exceeding 500 mm › 'electrical'0.00 %
7211 29 00 19Not further worked than cold-rolled (cold-reduced) › Other › Of a width exceeding 500 mm › Other0.00 %
7211 29 00 91Not further worked than cold-rolled (cold-reduced) › Other › Of a width not exceeding 500 mm
7211 29 00 91Not further worked than cold-rolled (cold-reduced) › Other › Of a width not exceeding 500 mm › 'electrical'0.00 %
7211 29 00 99Not further worked than cold-rolled (cold-reduced) › Other › Of a width not exceeding 500 mm › Other0.00 %
7211 90 00 00Other
7211 90 20 00Other › Perforated0.00 %
7211 90 80 00Other › Other
7211 90 80 10Other › Other › Of a width exceeding 500 mm
7211 90 80 10Other › Other › Of a width exceeding 500 mm › Not further worked than surface-treated0.00 %
7211 90 80 20Other › Other › Of a width exceeding 500 mm › Other0.00 %
7211 90 80 90Other › Other › Of a width not exceeding 500 mm0.00 %

Shipping products under this heading?

Paste your product list and get the suggested commodity code and duty rate for every item. The first 3 items are free; a full pack of 100 items is $49, one time, no subscription.

Classify my products

The same heading in the other systems: US HTS code 7211 · EU CN code 7211. Have a code already? Check what a code covers.