Commodity codes by chapter › Chapter 48 › Heading 4802

Commodity code 4802 — Uncoated paper and paperboard, of a kind used for writing, printing or other graphic purposes, and non-perforated punchcards and punch-tape paper, in rolls or rectangular (including square) sheets, of any size, other than paper of heading 4801 or 4803; handmade paper and paperboard

Source: UK Trade Tariff, published by HM Revenue & Customs. The rate shown is the third-country duty rate — the rate that applies when no trade-agreement preference is claimed.

Commodity lines under 4802

Commodity codeDescriptionThird-country duty
4802 10 00 00Handmade paper and paperboard0.00 %
4802 20 00 00Paper and paperboard of a kind used as a base for photosensitive, heat-sensitive or electrosensitive paper or paperboard0.00 %
4802 40 00 00Wallpaper base
4802 40 10 00Wallpaper base › Not containing fibres obtained by a mechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres0.00 %
4802 40 90 00Wallpaper base › Other0.00 %
4802 54 00 00Other paper and paperboard, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres
4802 54 00 00Other paper and paperboard, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres › Weighing less than 40 g/m<sup>2</sup>
4802 54 00 10Other paper and paperboard, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres › Weighing less than 40 g/m<sup>2</sup> › Decor paper with the following characteristics<br>- weighing 30 g/m² or more; having an ash content between 5% and 50%;<br>- having a klemm absorbency of at least 12 millimetres per 10 minutes or a resin pick-up of 20% to 200%;<br>- having a wet tensile strength of 6 to 12 newton (n) per 15 millimetres;<br>- having a gurley porosity of 3 to 80 seconds per 100 millilitres;<br>- having a smoothness of 20 to 300 according to the bekk method;<br>- in reels with a width up to 300 centimetres;<br>- whether or not pre-impregnated with a combination of latices or natural binders (like starch);<br>- excluding wallpaper and similar wallcoverings;<br>- excluding papers saturated with water-based melamine, urea, phenol or any thermosetting, thermoplastic resin solutions (‘the product under investigation’).<br>0.00 %
4802 54 00 90Other paper and paperboard, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres › Weighing less than 40 g/m<sup>2</sup> › Other0.00 %
4802 55 00 00Other paper and paperboard, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres › Weighing 40 g/m<sup>2</sup> or more but not more than 150 g/m<sup>2</sup>, in rolls
4802 55 15 00Other paper and paperboard, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres › Weighing 40 g/m<sup>2</sup> or more but not more than 150 g/m<sup>2</sup>, in rolls › Weighing 40 g/m<sup>2</sup> or more but less than 60 g/m<sup>2</sup>
4802 55 15 10Other paper and paperboard, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres › Weighing 40 g/m<sup>2</sup> or more but not more than 150 g/m<sup>2</sup>, in rolls › Weighing 40 g/m<sup>2</sup> or more but less than 60 g/m<sup>2</sup> › Decor paper with the following characteristics<br>- having an ash content between 5% and 50%;<br>- having a klemm absorbency of at least 12 millimetres per 10 minutes or a resin pick-up of 20% to 200%;<br>- having a wet tensile strength of 6 to 12 newton (n) per 15 millimetres;<br>- having a gurley porosity of 3 to 80 seconds per 100 millilitres;<br>- having a smoothness of 20 to 300 according to the bekk method;<br>- in reels with a width up to 300 centimetres;<br>- whether or not pre-impregnated with a combination of latices or natural binders (like starch);<br>- excluding wallpaper and similar wallcoverings;<br>- excluding papers saturated with water-based melamine, urea, phenol or any thermosetting, thermoplastic resin solutions (‘the product under investigation’).<br>0.00 %
4802 55 15 90Other paper and paperboard, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres › Weighing 40 g/m<sup>2</sup> or more but not more than 150 g/m<sup>2</sup>, in rolls › Weighing 40 g/m<sup>2</sup> or more but less than 60 g/m<sup>2</sup> › Other0.00 %
4802 55 25 00Other paper and paperboard, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres › Weighing 40 g/m<sup>2</sup> or more but not more than 150 g/m<sup>2</sup>, in rolls › Weighing 60 g/m<sup>2</sup> or more but less than 75 g/m<sup>2</sup>
4802 55 25 10Other paper and paperboard, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres › Weighing 40 g/m<sup>2</sup> or more but not more than 150 g/m<sup>2</sup>, in rolls › Weighing 60 g/m<sup>2</sup> or more but less than 75 g/m<sup>2</sup> › Decor paper with the following characteristics<br>- having an ash content between 5% and 50%;<br>- having a klemm absorbency of at least 12 millimetres per 10 minutes or a resin pick-up of 20% to 200%;<br>- having a wet tensile strength of 6 to 12 newton (n) per 15 millimetres;<br>- having a gurley porosity of 3 to 80 seconds per 100 millilitres;<br>- having a smoothness of 20 to 300 according to the bekk method;<br>- in reels with a width up to 300 centimetres;<br>- whether or not pre-impregnated with a combination of latices or natural binders (like starch);<br>- excluding wallpaper and similar wallcoverings;<br>- excluding papers saturated with water-based melamine, urea, phenol or any thermosetting, thermoplastic resin solutions (‘the product under investigation’).<br>0.00 %
4802 55 25 90Other paper and paperboard, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres › Weighing 40 g/m<sup>2</sup> or more but not more than 150 g/m<sup>2</sup>, in rolls › Weighing 60 g/m<sup>2</sup> or more but less than 75 g/m<sup>2</sup> › Other0.00 %
4802 55 30 00Other paper and paperboard, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres › Weighing 40 g/m<sup>2</sup> or more but not more than 150 g/m<sup>2</sup>, in rolls › Weighing 75 g/m<sup>2</sup> or more but less than 80 g/m<sup>2</sup>
4802 55 30 10Other paper and paperboard, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres › Weighing 40 g/m<sup>2</sup> or more but not more than 150 g/m<sup>2</sup>, in rolls › Weighing 75 g/m<sup>2</sup> or more but less than 80 g/m<sup>2</sup> › Decor paper with the following characteristics<br>- having an ash content between 5% and 50%;<br>- having a klemm absorbency of at least 12 millimetres per 10 minutes or a resin pick-up of 20% to 200%;<br>- having a wet tensile strength of 6 to 12 newton (n) per 15 millimetres;<br>- having a gurley porosity of 3 to 80 seconds per 100 millilitres;<br>- having a smoothness of 20 to 300 according to the bekk method;<br>- in reels with a width up to 300 centimetres;<br>- whether or not pre-impregnated with a combination of latices or natural binders (like starch);<br>- excluding wallpaper and similar wallcoverings;<br>- excluding papers saturated with water-based melamine, urea, phenol or any thermosetting, thermoplastic resin solutions (‘the product under investigation’).<br>0.00 %
4802 55 30 90Other paper and paperboard, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres › Weighing 40 g/m<sup>2</sup> or more but not more than 150 g/m<sup>2</sup>, in rolls › Weighing 75 g/m<sup>2</sup> or more but less than 80 g/m<sup>2</sup> › Other0.00 %
4802 55 90 00Other paper and paperboard, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres › Weighing 40 g/m<sup>2</sup> or more but not more than 150 g/m<sup>2</sup>, in rolls › Weighing 80 g/m<sup>2</sup> or more
4802 55 90 10Other paper and paperboard, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres › Weighing 40 g/m<sup>2</sup> or more but not more than 150 g/m<sup>2</sup>, in rolls › Weighing 80 g/m<sup>2</sup> or more › Decor paper with the following characteristics<br>- having an ash content between 5% and 50%;<br>- having a klemm absorbency of at least 12 millimetres per 10 minutes or a resin pick-up of 20% to 200%;<br>- having a wet tensile strength of 6 to 12 newton (n) per 15 millimetres;<br>- having a gurley porosity of 3 to 80 seconds per 100 millilitres;<br>- having a smoothness of 20 to 300 according to the bekk method;<br>- in reels with a width up to 300 centimetres;<br>- whether or not pre-impregnated with a combination of latices or natural binders (like starch);<br>- excluding wallpaper and similar wallcoverings;<br>- excluding papers saturated with water-based melamine, urea, phenol or any thermosetting, thermoplastic resin solutions (‘the product under investigation’).<br>0.00 %
4802 55 90 90Other paper and paperboard, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres › Weighing 40 g/m<sup>2</sup> or more but not more than 150 g/m<sup>2</sup>, in rolls › Weighing 80 g/m<sup>2</sup> or more › Other0.00 %
4802 56 00 00Other paper and paperboard, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres › Weighing 40 g/m<sup>2</sup> or more but not more than 150 g/m<sup>2</sup>, in sheets with one side not exceeding 435 mm and the other side not exceeding 297 mm in the unfolded state
4802 56 20 00Other paper and paperboard, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres › Weighing 40 g/m<sup>2</sup> or more but not more than 150 g/m<sup>2</sup>, in sheets with one side not exceeding 435 mm and the other side not exceeding 297 mm in the unfolded state › With one side measuring 297 mm and the other side measuring 210 mm (a4 format)0.00 %
4802 56 80 00Other paper and paperboard, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres › Weighing 40 g/m<sup>2</sup> or more but not more than 150 g/m<sup>2</sup>, in sheets with one side not exceeding 435 mm and the other side not exceeding 297 mm in the unfolded state › Other0.00 %
4802 57 00 00Other paper and paperboard, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres › Other, weighing 40 g/m<sup>2</sup> or more but not more than 150 g/m<sup>2</sup>0.00 %
4802 58 00 00Other paper and paperboard, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres › Weighing more than 150 g/m<sup>2</sup>
4802 58 10 00Other paper and paperboard, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres › Weighing more than 150 g/m<sup>2</sup> › In rolls0.00 %
4802 58 90 00Other paper and paperboard, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres › Weighing more than 150 g/m<sup>2</sup> › Other0.00 %
4802 61 00 00Other paper and paperboard, of which more than 10 % by weight of the total fibre content consists of fibres obtained by a mechanical or chemi-mechanical process
4802 61 00 00Other paper and paperboard, of which more than 10 % by weight of the total fibre content consists of fibres obtained by a mechanical or chemi-mechanical process › In rolls
4802 61 15 00Other paper and paperboard, of which more than 10 % by weight of the total fibre content consists of fibres obtained by a mechanical or chemi-mechanical process › In rolls › Weighing less than 72 g/m<sup>2</sup> and of which more than 50 % by weight of the total fibre content consists of fibres obtained by a mechanical process0.00 %
4802 61 80 00Other paper and paperboard, of which more than 10 % by weight of the total fibre content consists of fibres obtained by a mechanical or chemi-mechanical process › In rolls › Other0.00 %
4802 62 00 00Other paper and paperboard, of which more than 10 % by weight of the total fibre content consists of fibres obtained by a mechanical or chemi-mechanical process › In sheets with one side not exceeding 435 mm and the other side not exceeding 297 mm in the unfolded state0.00 %
4802 69 00 00Other paper and paperboard, of which more than 10 % by weight of the total fibre content consists of fibres obtained by a mechanical or chemi-mechanical process › Other0.00 %

Shipping products under this heading?

Paste your product list and get the suggested commodity code and duty rate for every item. The first 3 items are free; a full pack of 100 items is $49, one time, no subscription.

Classify my products

The same heading in the other systems: US HTS code 4802 · EU CN code 4802. Have a code already? Check what a code covers.