Commodity codes by chapter › Chapter 39 › Heading 3920

Commodity code 3920 — Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials

Source: UK Trade Tariff, published by HM Revenue & Customs. The rate shown is the third-country duty rate — the rate that applies when no trade-agreement preference is claimed.

Commodity lines under 3920

Commodity codeDescriptionThird-country duty
3920 10 00 00Of polymers of ethylene
3920 10 23 00Of polymers of ethylene › Of a thickness not exceeding 0,125 mm
3920 10 23 00Of polymers of ethylene › Of a thickness not exceeding 0,125 mm › Of polyethylene having a specific gravity of
3920 10 23 00Of polymers of ethylene › Of a thickness not exceeding 0,125 mm › Of polyethylene having a specific gravity of › Less than 0,94
3920 10 23 00Of polymers of ethylene › Of a thickness not exceeding 0,125 mm › Of polyethylene having a specific gravity of › Less than 0,94 › Polyethylene film, of a thickness of 20 micrometres or more but not exceeding 40 micrometres, for the production of photoresist film used in the manufacture of semiconductors or printed circuits
3920 10 24 00Of polymers of ethylene › Of a thickness not exceeding 0,125 mm › Of polyethylene having a specific gravity of › Less than 0,94 › Stretch film, not printed
3920 10 24 10Of polymers of ethylene › Of a thickness not exceeding 0,125 mm › Of polyethylene having a specific gravity of › Less than 0,94 › Stretch film, not printed › For use in certain types of aircraft6.00 %
3920 10 24 90Of polymers of ethylene › Of a thickness not exceeding 0,125 mm › Of polyethylene having a specific gravity of › Less than 0,94 › Stretch film, not printed › Other6.00 %
3920 10 25 00Of polymers of ethylene › Of a thickness not exceeding 0,125 mm › Of polyethylene having a specific gravity of › Less than 0,94 › Other
3920 10 25 05Of polymers of ethylene › Of a thickness not exceeding 0,125 mm › Of polyethylene having a specific gravity of › Less than 0,94 › Other › For use in certain types of aircraft6.00 %
3920 10 25 90Of polymers of ethylene › Of a thickness not exceeding 0,125 mm › Of polyethylene having a specific gravity of › Less than 0,94 › Other › Other6.00 %
3920 10 28 00Of polymers of ethylene › Of a thickness not exceeding 0,125 mm › Of polyethylene having a specific gravity of › 0,94 or more
3920 10 28 10Of polymers of ethylene › Of a thickness not exceeding 0,125 mm › Of polyethylene having a specific gravity of › 0,94 or more › For use in certain types of aircraft6.00 %
3920 10 28 99Of polymers of ethylene › Of a thickness not exceeding 0,125 mm › Of polyethylene having a specific gravity of › 0,94 or more › Other6.00 %
3920 10 40 00Of polymers of ethylene › Of a thickness not exceeding 0,125 mm › Other
3920 10 40 10Of polymers of ethylene › Of a thickness not exceeding 0,125 mm › Other › For use in certain types of aircraft6.00 %
3920 10 40 99Of polymers of ethylene › Of a thickness not exceeding 0,125 mm › Other › Other6.00 %
3920 10 81 00Of polymers of ethylene › Of a thickness exceeding 0,125 mm
3920 10 81 00Of polymers of ethylene › Of a thickness exceeding 0,125 mm › Synthetic paper pulp, in the form of moist sheets made from unconnected finely branched polyethylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15 %, containing poly(vinyl alcohol) dissolved in water as the moistening agent0.00 %
3920 10 89 00Of polymers of ethylene › Of a thickness exceeding 0,125 mm › Other
3920 10 89 10Of polymers of ethylene › Of a thickness exceeding 0,125 mm › Other › For use in certain types of aircraft6.00 %
3920 10 89 40Of polymers of ethylene › Of a thickness exceeding 0,125 mm › Other › Other
3920 10 89 40Of polymers of ethylene › Of a thickness exceeding 0,125 mm › Other › Other › Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0.8 mm or more but not exceeding 1.2 mm6.00 %
3920 10 89 90Of polymers of ethylene › Of a thickness exceeding 0,125 mm › Other › Other › Other6.00 %
3920 20 00 00Of polymers of propylene
3920 20 21 00Of polymers of propylene › Of a thickness not exceeding 0,10 mm
3920 20 21 00Of polymers of propylene › Of a thickness not exceeding 0,10 mm › Biaxially oriented
3920 20 21 10Of polymers of propylene › Of a thickness not exceeding 0,10 mm › Biaxially oriented › For use in certain types of aircraft6.00 %
3920 20 21 50Of polymers of propylene › Of a thickness not exceeding 0,10 mm › Biaxially oriented › Biaxialy oriented film of multiple layers of polypropylene, with a total thickness of not more than 14 micron6.00 %
3920 20 21 90Of polymers of propylene › Of a thickness not exceeding 0,10 mm › Biaxially oriented › Other6.00 %
3920 20 29 00Of polymers of propylene › Of a thickness not exceeding 0,10 mm › Other
3920 20 29 10Of polymers of propylene › Of a thickness not exceeding 0,10 mm › Other › For use in certain types of aircraft6.00 %
3920 20 29 70Of polymers of propylene › Of a thickness not exceeding 0,10 mm › Other › Other
3920 20 29 70Of polymers of propylene › Of a thickness not exceeding 0,10 mm › Other › Other › Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, with a core layer whether or not containing titanium dioxide, having:<br>- a thickness of 55 µm or more but not more than 97 µm,<br>- a tensile modulus in the machine direction of 0,30 gpa or more but not more than 1,45 gpa, and<br>- a tensile modulus in the transverse direction of 0,20 gpa or more but not more than 0,70 gpa<br>6.00 %
3920 20 29 94Of polymers of propylene › Of a thickness not exceeding 0,10 mm › Other › Other › Mono-axial oriented, co-extruded film:<br>-consisting of 3 to 5 layers,<br>-each layer mainly consisting of polypropylene and/or polyethylene,<br>-each layer containing not more than 10 % by weight of other polymers,<br>-whether or not containing titanium dioxide in the core layer,<br>-of an overall thickness of not more than 75 μm<br>6.00 %
3920 20 29 99Of polymers of propylene › Of a thickness not exceeding 0,10 mm › Other › Other › Other6.00 %
3920 20 80 00Of polymers of propylene › Of a thickness exceeding 0,10 mm
3920 20 80 10Of polymers of propylene › Of a thickness exceeding 0,10 mm › For use in certain types of aircraft6.00 %
3920 20 80 90Of polymers of propylene › Of a thickness exceeding 0,10 mm › Other6.00 %
3920 30 00 00Of polymers of styrene
3920 30 00 10Of polymers of styrene › Acrylonitrile-butadiene-styrene, for use in certain types of aircraft6.00 %
3920 30 00 30Of polymers of styrene › Opaque layer, whether or not printed, biaxially oriented, high impact polystyrene foil in rolls with: <br>-a thickness of 0,229 mm or more but not more than 0,279 mm, <br>-an titanium dioxide content by weight of 3 % or more but not more than 3,5 %, <br>-on one side a highly hydrophobic, chemically neutral and non-reactive coating<br>6.00 %
3920 30 00 90Of polymers of styrene › Other6.00 %
3920 43 00 00Of polymers of vinyl chloride
3920 43 00 00Of polymers of vinyl chloride › Containing by weight not less than 6 % of plasticisers
3920 43 10 00Of polymers of vinyl chloride › Containing by weight not less than 6 % of plasticisers › Of a thickness not exceeding 1 mm
3920 43 10 10Of polymers of vinyl chloride › Containing by weight not less than 6 % of plasticisers › Of a thickness not exceeding 1 mm › For use in certain types of aircraft6.00 %
3920 43 10 92Of polymers of vinyl chloride › Containing by weight not less than 6 % of plasticisers › Of a thickness not exceeding 1 mm › Other
3920 43 10 92Of polymers of vinyl chloride › Containing by weight not less than 6 % of plasticisers › Of a thickness not exceeding 1 mm › Other › Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 µm or more but not more than 80 µm, containing 30 or more but not more than 40 parts of plasticizer to 100 parts of poly(vinyl chloride)6.00 %
3920 43 10 95Of polymers of vinyl chloride › Containing by weight not less than 6 % of plasticisers › Of a thickness not exceeding 1 mm › Other › Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet6.00 %
3920 43 10 99Of polymers of vinyl chloride › Containing by weight not less than 6 % of plasticisers › Of a thickness not exceeding 1 mm › Other › Other6.00 %
3920 43 90 00Of polymers of vinyl chloride › Containing by weight not less than 6 % of plasticisers › Of a thickness exceeding 1 mm
3920 43 90 10Of polymers of vinyl chloride › Containing by weight not less than 6 % of plasticisers › Of a thickness exceeding 1 mm › For use in certain types of aircraft6.00 %
3920 43 90 90Of polymers of vinyl chloride › Containing by weight not less than 6 % of plasticisers › Of a thickness exceeding 1 mm › Other6.00 %
3920 49 00 00Of polymers of vinyl chloride › Other
3920 49 10 00Of polymers of vinyl chloride › Other › Of a thickness not exceeding 1 mm
3920 49 10 10Of polymers of vinyl chloride › Other › Of a thickness not exceeding 1 mm › For use in certain types of aircraft6.00 %
3920 49 10 30Of polymers of vinyl chloride › Other › Of a thickness not exceeding 1 mm › Other
3920 49 10 30Of polymers of vinyl chloride › Other › Of a thickness not exceeding 1 mm › Other › Film of a (polyvinyl)chloride-copolymer<br>- containing by weight 45 % or more of fillers<br>- on a support<br>6.00 %
3920 49 10 99Of polymers of vinyl chloride › Other › Of a thickness not exceeding 1 mm › Other › Other6.00 %
3920 49 90 00Of polymers of vinyl chloride › Other › Of a thickness exceeding 1 mm
3920 49 90 10Of polymers of vinyl chloride › Other › Of a thickness exceeding 1 mm › For use in certain types of aircraft6.00 %
3920 49 90 90Of polymers of vinyl chloride › Other › Of a thickness exceeding 1 mm › Other6.00 %
3920 51 00 00Of acrylic polymers
3920 51 00 00Of acrylic polymers › Of poly(methyl methacrylate)
3920 51 00 20Of acrylic polymers › Of poly(methyl methacrylate) › Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not more than 19 mm6.00 %
3920 51 00 30Of acrylic polymers › Of poly(methyl methacrylate) › Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50μm or more but not exceeding 125μm6.00 %
3920 51 00 40Of acrylic polymers › Of poly(methyl methacrylate) › Sheets of polymethylmethacrylate conforming to standard en 4366 (mil-prf-25690)6.00 %
3920 51 00 50Of acrylic polymers › Of poly(methyl methacrylate) › Sheets of polymethylmethacrylate conforming to standard<br>— en 4364 (mil-p-5425e) and dtd5592a, or<br>— en 4365 (mil-p-8184) and dtd5592a6.00 %
3920 51 00 90Of acrylic polymers › Of poly(methyl methacrylate) › Other6.00 %
3920 59 00 00Of acrylic polymers › Other
3920 59 10 00Of acrylic polymers › Other › Copolymer of acrylic and methacrylic esters, in the form of film of a thickness not exceeding 150 micrometres0.00 %
3920 59 90 00Of acrylic polymers › Other › Other6.00 %
3920 61 00 00Of polycarbonates, alkyd resins, polyallyl esters or other polyesters
3920 61 00 00Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of polycarbonates
3920 61 00 30Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of polycarbonates › Reflecting sheet:<br>- of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern<br>- covered on one or both sides with one or more layers of plastic or metallisation, and<br>- whether or not covered on one side with a self-adhesive layer and a release sheet<br>6.00 %
3920 61 00 40Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of polycarbonates › Extruded thermoplastic foils or films of polycarbonate with:<br>-matt surface texture on both sides<br>-a thickness of more than 50 μm but not more than 200 μm,<br>-a width of 800 mm or more, but not more than 1 500 mm, and<br>-a length of 300 m or more, but not more 2500 m<br>for use in the production of retroreflective products6.00 %
3920 61 00 50Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of polycarbonates › Coextruded film of polycarbonate main layer and polymethyl methacrylate top layer with a:<br>-total thickness of more than 230 μm but not more than 270 μm,<br>-top layer thickness of more than 40 μm but not more than 55 μm,<br>-defined surface roughness of the top layer of 0,5 μm or less (according to iso 4287),<br>-uv-stabilized top layer6.00 %
3920 61 00 90Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of polycarbonates › Other6.00 %
3920 62 00 00Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of poly(ethylene terephthalate)
3920 62 12 00Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of poly(ethylene terephthalate) › Of a thickness not exceeding 0,35 mm
3920 62 12 00Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of poly(ethylene terephthalate) › Of a thickness not exceeding 0,35 mm › Poly(ethylene terephthalate) film, of a thickness of 72 micrometres or more but not exceeding 79 micrometres, for the manufacture of flexible magnetic disks; poly(ethylene terephthalate) film, of a thickness of 100 micrometres or more but not exceeding 150 micrometres, for the manufacture of photopolymer printing plates6.00 %
3920 62 19 00Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of poly(ethylene terephthalate) › Of a thickness not exceeding 0,35 mm › Other
3920 62 19 05Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of poly(ethylene terephthalate) › Of a thickness not exceeding 0,35 mm › Other › Poly(ethylene terephthalate) film in rolls:<br>- with a thickness of 0,335 mm or more but not more than 0,365 mm, and<br>- coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm<br>6.00 %
3920 62 19 08Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of poly(ethylene terephthalate) › Of a thickness not exceeding 0,35 mm › Other › Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 µm, either:<br>- only dyed in the mass, or<br>- dyed in the mass and metallised on one side<br>6.00 %
3920 62 19 28Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of poly(ethylene terephthalate) › Of a thickness not exceeding 0,35 mm › Other › Non-transparent poly(ethylene terephthalate) film:<br>-each outer layer with a thickness of 7 nm or more but not more than 80 nm,<br>-with a tensile strength of 300 n/cm or more (astm d-882),<br>-with a total thickness of 200 µm or more but not more than 350 µm, and<br>-with a width of 600 mm or more but not more than 1 600 mm<br>- covered on one side with a layer of a fluoropolymer, and on the other side with an adhesive and a layer of polyvinylidene difluoride, or coated on both sides with polyvinylidene difluoride or polyvinyl fluoride based on fluorinated polymer composites6.00 %
3920 62 19 32Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of poly(ethylene terephthalate) › Of a thickness not exceeding 0,35 mm › Other › Transparent poly(ethylene terephthalate) film:<br>-having thickness of both sides of 7 nm or more but not more than 80 nm, or thickness of both sides of 7 µm or more but not more than 80 µm, whether coated with an acrylic-based organic material or not,<br>-with a surface tension of 36 dyne/cm or more but not more than 39 dyne/cm, or transparent 3 or 4 layers, second layer of pet, and other layers contain fluorine resin, <br>-with a light transmittance of more than 70 %, <br>-with a haze value of not more than 1,3 %,<br>-with a total thickness of 10 µm or more but not more than 350 µm, <br>-with a width of 800 mm or more but not more than 1 600 mm<br>6.00 %
3920 62 19 38Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of poly(ethylene terephthalate) › Of a thickness not exceeding 0,35 mm › Other › Poly(ethylene terephthalate) film, of a thickness of not more than 12 µm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm6.00 %
3920 62 19 48Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of poly(ethylene terephthalate) › Of a thickness not exceeding 0,35 mm › Other › Sheets or rolls of poly(ethylene terephthalate):<br>- coated on both sides with a layer of epoxy acrylic resin,<br>- of a total thickness of 37 μm (± 3 μm)<br>6.00 %
3920 62 19 52Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of poly(ethylene terephthalate) › Of a thickness not exceeding 0,35 mm › Other › Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 µm and having a surface resistivity of not more than 10 000 ohms (per square) (as determined by the astm d 257 method)6.00 %
3920 62 19 60Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of poly(ethylene terephthalate) › Of a thickness not exceeding 0,35 mm › Other › Poly (ethylene terephtalate) film:<br>- of a thickness of not more than 20 µm,<br>- coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2µm<br>6.00 %
3920 62 19 70Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of poly(ethylene terephthalate) › Of a thickness not exceeding 0,35 mm › Other › Poly(ethylene terephthalate) film in rolls with:<br>-a thickness of 35 μm or more, but not more than 75 μm,<br>-a tensile strength of 40 mpa or more in the machine direction (md) and 200 mpa or more in the transverse direction (td),<br>-an elongation at break of 400 % or more in md and 30 % or more in td,<br>-a heat shrinkage (in water at 90 °c/10s) in md of 0,49 % or more, but not more than 0,51 %,<br>-a dynamic heat shrinkage (between 55 °c and 70 °c ) in td of not more than 20 percentage points,<br>-a light transmittance of 85 % or more,<br>-a haze ratio of not more than 6 %,<br>-a surface tension of 38 mn/m or more,<br>-a density of 1,30 g/cm³ or more, but not more than 1,34 g/cm³,<br>-a shelf life declared by the manufacturer of not less than 12 months<br>6.00 %
3920 62 19 79Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of poly(ethylene terephthalate) › Of a thickness not exceeding 0,35 mm › Other › Reflective film of polyethylene terephthalate, embossed in a pyramidal pattern, with<br>-a thickness of 0.07 mm or more but not more than 0.15 mm<br>-a width of 762 mm or more but not more than 1350 mm<br>6.00 %
3920 62 19 85Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of poly(ethylene terephthalate) › Of a thickness not exceeding 0,35 mm › Other › Three-layer transparent plastic film consisting of a 15 µm fluorinated polymer (fcc) (eva) layer, a 275 µm polyethylene terephthalate (pet) layer and a 25 µm fluorinated polymer (fcc) layer with:<br>-a total thickness of 300 µm or more, but not more than 330 µm,<br>-a tensile strength of 375 n/cm or more in both the longitudinal and transverse directions (astm d-882), <br>-a low thermal shrinkage of 1 % or less at 150 °c for 30 minutes,<br>-a low water vapor permeability of 2,5 g/m²•d or less, and<br>-a high breakdown voltage of 18 kv or more and <br>-a partial discharge voltage of 1500 vdc or more (bg/t 123542.2-2009)<br>to be used as a protective layer on the back of photovoltaic modules6.00 %
3920 62 19 99Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of poly(ethylene terephthalate) › Of a thickness not exceeding 0,35 mm › Other › Other6.00 %
3920 62 90 00Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of poly(ethylene terephthalate) › Of a thickness exceeding 0,35 mm
3920 62 90 10Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of poly(ethylene terephthalate) › Of a thickness exceeding 0,35 mm › Poly(ethylene terephthalate) film in rolls:<br>- with a thickness of 0,335 mm or more but not more than 0,365 mm, and<br>- coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm<br>6.00 %
3920 62 90 90Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of poly(ethylene terephthalate) › Of a thickness exceeding 0,35 mm › Other6.00 %
3920 63 00 00Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of unsaturated polyesters6.00 %
3920 69 00 00Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of other polyesters
3920 69 00 20Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of other polyesters › Film of poly(ethylene naphthalene-2,6-dicarboxylate)6.00 %
3920 69 00 30Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of other polyesters › Mono- or multilayer, transverse oriented, shrink film:<br>-composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives and not more than 10 % by weight of additives based on biodegradable polyesters,<br>-with a thickness of 20 μm or more but not more than 100 μm,<br>-with a length of 2 385 m or more but not more than 9 075 m,<br>-biodegradable and compostable (as determined by the method en 13432)6.00 %
3920 69 00 70Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of other polyesters › Mono- or multilayer, biaxially oriented film: -composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives, and not more than 10 % by weight of additives based on biodegradable polyesters, -with a thickness of 9 mm or more but not more than 120 mm, -with a length of 1 395 m or more but not more than 21 560 m, -biodegradable and compostable (as determined by the method en 13432)6.00 %
3920 69 00 90Of polycarbonates, alkyd resins, polyallyl esters or other polyesters › Of other polyesters › Other6.00 %
3920 71 00 00Of cellulose or its chemical derivatives
3920 71 00 00Of cellulose or its chemical derivatives › Of regenerated cellulose6.00 %
3920 73 00 00Of cellulose or its chemical derivatives › Of cellulose acetate
3920 73 10 00Of cellulose or its chemical derivatives › Of cellulose acetate › Film in rolls or in strips, for cinematography or photography6.00 %
3920 73 80 00Of cellulose or its chemical derivatives › Of cellulose acetate › Other6.00 %
3920 79 00 00Of cellulose or its chemical derivatives › Of other cellulose derivatives
3920 79 10 00Of cellulose or its chemical derivatives › Of other cellulose derivatives › Of vulcanised fibre4.00 %
3920 79 90 00Of cellulose or its chemical derivatives › Of other cellulose derivatives › Other6.00 %
3920 91 00 00Of other plastics
3920 91 00 00Of other plastics › Of poly(vinyl butyral)
3920 91 00 10Of other plastics › Of poly(vinyl butyral) › For use in certain types of aircraft6.00 %
3920 91 00 52Of other plastics › Of poly(vinyl butyral) › Other
3920 91 00 52Of other plastics › Of poly(vinyl butyral) › Other › Poly(vinyl butyral) film:<br>- containing by weight  26 % or more but not more than 30 % of triethyleneglycol bis(2-ethyl hexanoate) as a plasticiser,<br>- with a thickness of 0,73 mm or more but not more than 1,50 mm<br>6.00 %
3920 91 00 91Of other plastics › Of poly(vinyl butyral) › Other › Poly(vinyl butyral) film having a graduated coloured band6.00 %
3920 91 00 93Of other plastics › Of poly(vinyl butyral) › Other › Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics:<br>- a visible light transmission of 50 % or more,<br>- coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral),<br>- a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2 mm<br>6.00 %
3920 91 00 95Of other plastics › Of poly(vinyl butyral) › Other › Co-extruded trilayer poly(vinyl butyral) film
3920 91 00 95Of other plastics › Of poly(vinyl butyral) › Other › Co-extruded trilayer poly(vinyl butyral) film › Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29 % or more but not more than 31 % of 2,2'-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser6.00 %
3920 91 00 97Of other plastics › Of poly(vinyl butyral) › Other › Co-extruded trilayer poly(vinyl butyral) film › Other6.00 %
3920 91 00 99Of other plastics › Of poly(vinyl butyral) › Other › Other6.00 %
3920 92 00 00Of other plastics › Of polyamides6.00 %
3920 93 00 00Of other plastics › Of amino-resins6.00 %
3920 94 00 00Of other plastics › Of phenolic resins6.00 %
3920 99 00 00Of other plastics › Of other plastics
3920 99 21 00Of other plastics › Of other plastics › Of condensation or rearrangement polymerisation products, whether or not chemically modified
3920 99 21 00Of other plastics › Of other plastics › Of condensation or rearrangement polymerisation products, whether or not chemically modified › Polyimide foil and strip, uncoated, or coated or covered solely with plastic0.00 %
3920 99 28 00Of other plastics › Of other plastics › Of condensation or rearrangement polymerisation products, whether or not chemically modified › Other
3920 99 28 40Of other plastics › Of other plastics › Of condensation or rearrangement polymerisation products, whether or not chemically modified › Other › Polymer film containing the following monomers:<br>- poly (tetramethylene ether glycol),<br>- bis (4-isocyanotocyclohexyl) methane,<br>- 1,4-butanediol or 1,3-butanediol,<br>- with a thickness of 0,25 mm or more but not more than 5,0 mm,<br>- embossed with a regular pattern on one surface,<br>- and covered with a release sheet<br>6.00 %
3920 99 28 50Of other plastics › Of other plastics › Of condensation or rearrangement polymerisation products, whether or not chemically modified › Other › Thermoplastic polyurethane film (tpu) based on an aliphatic polycaprolactone (pcl), transparently backed on one side with a removable protective film (pet film), with a light transmission of more than 93% (according to din en iso 13468-1), with a thickness of 25μm or more but not more than 500μm6.00 %
3920 99 28 65Of other plastics › Of other plastics › Of condensation or rearrangement polymerisation products, whether or not chemically modified › Other › Matt, thermoplastic polyurethane foil in rolls with:<br>- a width of 1640 mm  (± 10 mm),<br>- a gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method astm d2457),<br>- a surface roughness of 1,9 ra or more but not more than 2,8 ra (as determined by the method iso 4287),<br>- a thickness of more than 365 µm but not more than 760 µm,<br>- a hardness of 90 (± 4) (as determined by the method: shore a (astm d2240)),<br>- an elongation to break of 470 % (as determined by the method: en iso 527)<br>6.00 %
3920 99 28 70Of other plastics › Of other plastics › Of condensation or rearrangement polymerisation products, whether or not chemically modified › Other › Sheets on rolls, consisting of epoxy resin, with conducting properties, containing:<br>- microspheres with a coating of metal, whether or not alloyed with gold,<br>- an adhesive layer,<br>- with a protective layer of silicone or poly(ethylene terephthalate) on one side, <br>- with a protective layer of poly(ethylene terephthalate) on the other side, and<br>- with a width of 5 cm or more but not more than 100 cm<br>- with a length of not more than 2 000 m6.00 %
3920 99 28 90Of other plastics › Of other plastics › Of condensation or rearrangement polymerisation products, whether or not chemically modified › Other › Other6.00 %
3920 99 52 00Of other plastics › Of other plastics › Of addition polymerisation products
3920 99 52 00Of other plastics › Of other plastics › Of addition polymerisation products › Poly(vinyl fluoride) sheet; biaxially oriented poly(vinyl alcohol) film, containing by weight 97 % or more of poly(vinyl alcohol), uncoated, of a thickness not exceeding 1 mm0.00 %
3920 99 53 00Of other plastics › Of other plastics › Of addition polymerisation products › Ion-exchange membranes of fluorinated plastic material, for use in chlor-alkali electrolytic cells0.00 %
3920 99 59 00Of other plastics › Of other plastics › Of addition polymerisation products › Other
3920 99 59 10Of other plastics › Of other plastics › Of addition polymerisation products › Other › For use in certain types of aircraft6.00 %
3920 99 59 25Of other plastics › Of other plastics › Of addition polymerisation products › Other › Other
3920 99 59 25Of other plastics › Of other plastics › Of addition polymerisation products › Other › Other › Poly(1-chlorotrifluoroethylene) film6.00 %
3920 99 59 65Of other plastics › Of other plastics › Of addition polymerisation products › Other › Other › Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 µm or more but not more than 90 µm, a tensile strength at break of 20 mpa or more but not more than 55 mpa and an elongation at break of 250 % or more but not more than 900 %6.00 %
3920 99 59 90Of other plastics › Of other plastics › Of addition polymerisation products › Other › Other › Other6.00 %
3920 99 90 00Of other plastics › Of other plastics › Other6.00 %

Shipping products under this heading?

Paste your product list and get the suggested commodity code and duty rate for every item. The first 3 items are free; a full pack of 100 items is $49, one time, no subscription.

Classify my products

The same heading in the other systems: US HTS code 3920 · EU CN code 3920. Have a code already? Check what a code covers.