Commodity codes by chapter › Chapter 39 › Heading 3919

Commodity code 3919 — Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls

Source: UK Trade Tariff, published by HM Revenue & Customs. The rate shown is the third-country duty rate — the rate that applies when no trade-agreement preference is claimed.

Commodity lines under 3919

Commodity codeDescriptionThird-country duty
3919 10 00 00In rolls of a width not exceeding 20 cm
3919 10 12 00In rolls of a width not exceeding 20 cm › Strips, the coating of which consists of unvulcanised natural or synthetic rubber
3919 10 12 00In rolls of a width not exceeding 20 cm › Strips, the coating of which consists of unvulcanised natural or synthetic rubber › Of poly(vinyl chloride) or of polyethylene6.00 %
3919 10 15 00In rolls of a width not exceeding 20 cm › Strips, the coating of which consists of unvulcanised natural or synthetic rubber › Of polypropylene6.00 %
3919 10 19 00In rolls of a width not exceeding 20 cm › Strips, the coating of which consists of unvulcanised natural or synthetic rubber › Other
3919 10 19 10In rolls of a width not exceeding 20 cm › Strips, the coating of which consists of unvulcanised natural or synthetic rubber › Other › Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film6.00 %
3919 10 19 90In rolls of a width not exceeding 20 cm › Strips, the coating of which consists of unvulcanised natural or synthetic rubber › Other › Other6.00 %
3919 10 80 00In rolls of a width not exceeding 20 cm › Other
3919 10 80 10In rolls of a width not exceeding 20 cm › Other › For use in certain types of aircraft6.00 %
3919 10 80 25In rolls of a width not exceeding 20 cm › Other › Other
3919 10 80 25In rolls of a width not exceeding 20 cm › Other › Other › Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film6.00 %
3919 10 80 27In rolls of a width not exceeding 20 cm › Other › Other › Polyester film:<br>- coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °c or more but not more than 200 °c, and a polyester liner, and<br>- on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °c or more but not more than  200 °c, and a polyester liner<br>6.00 %
3919 10 80 35In rolls of a width not exceeding 20 cm › Other › Other › Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film6.00 %
3919 10 80 45In rolls of a width not exceeding 20 cm › Other › Other › Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm6.00 %
3919 10 80 55In rolls of a width not exceeding 20 cm › Other › Other › Acrylic foam tape:<br>- covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive, <br>- covered on the other side with an acrylic pressure sensitive adhesive, <br>- covered on one or both sides with a release sheet,<br>- with a peel adhesion of more than 25 n/cm (at an angle of 90° as determined by the astm d 3330 method)6.00 %
3919 10 80 57In rolls of a width not exceeding 20 cm › Other › Other › Reflecting sheet:<br>- of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern<br>- covered on one or both sides with one or more layers of plastic or metallisation, and<br>- whether or not covered on one side with a self-adhesive layer and a release sheet<br>6.00 %
3919 10 80 63In rolls of a width not exceeding 20 cm › Other › Other › Reflecting film consisting of<br>- a layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use,<br>- a layer of an acrylic resin having embedded glass beads,<br>- a layer of an acrylic resin hardened by a melamine cross-linking agent,<br>- a metal layer,<br>- an acrylic adhesive, and<br>- a release film<br>6.00 %
3919 10 80 73In rolls of a width not exceeding 20 cm › Other › Other › Self-adhesive reflecting sheet whether or not in segmented pieces,<br>- whether or not containing a watermark,<br>- with or without an application tape coated on one side with an adhesive;<br>the reflective sheet consists of:<br>- a layer of acrylic or vinyl polymer,<br>- a layer of poly(methyl methacrylate)  or  polycarbonate containing microprisms,<br>- a layer of metallisation,<br>- an adhesive layer, and<br>- a release sheet<br>- whether or not containing an additional layer of polyester<br>6.00 %
3919 10 80 75In rolls of a width not exceeding 20 cm › Other › Other › Self adhesive reflecting film, consisting of several layers including:<br>- a copolymer of acrylic resin,<br>- polyurethane, <br>- a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use,<br>- glass microspheres, and<br>- an adhesive layer, with a release liner on one or both sides6.00 %
3919 10 80 78In rolls of a width not exceeding 20 cm › Other › Other › Polytetrafluoroethylene film, <br>-with a thickness of 50 µm or more, <br>-with a width of 6,30 mm or more but not more than 740 mm, <br>-an elongation at break of not more than 200 %, and <br>-coated on one side with a pressure sensitive silicone adhesive with a thickness of not more than 50 µm<br>6.00 %
3919 10 80 90In rolls of a width not exceeding 20 cm › Other › Other › Other6.00 %
3919 90 00 00Other
3919 90 20 00Other › Self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers0.00 %
3919 90 80 00Other › Other
3919 90 80 10Other › Other › For use in certain types of aircraft6.00 %
3919 90 80 20Other › Other › Other
3919 90 80 20Other › Other › Other › Polyester film:<br>- coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °c or more but not more than 200 °c, and a polyester liner, and<br>- on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °c or more but not more than  200 °c, and a polyester liner<br>6.00 %
3919 90 80 23Other › Other › Other › Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner6.00 %
3919 90 80 24Other › Other › Other › Reflecting laminated sheet:<br>- consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern,<br>- covered on both sides with one or more layers of plastic material and<br>- covered on one side with an adhesive layer and a release sheet<br>6.00 %
3919 90 80 30Other › Other › Other › Reflecting sheet:<br>- of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern<br>- covered on one or both sides with one or more layers of plastic or metallisation, and<br>- whether or not covered on one side with a self-adhesive layer and a release sheet<br>6.00 %
3919 90 80 31Other › Other › Other › Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film6.00 %
3919 90 80 33Other › Other › Other › Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60 μm or more, but not more than 70 μm, and with a width of more than 1 245 mm but not more than 1 255 mm6.00 %
3919 90 80 45Other › Other › Other › Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm6.00 %
3919 90 80 48Other › Other › Other › Polytetrafluoroethylene film, <br>-with a thickness of 50 µm or more, <br>-with a width of 6,30 mm or more but not more than 740 mm, <br>-an elongation at break of not more than 200 %, and <br>-coated on one side with a pressure sensitive silicone adhesive with a thickness of not more than 50 µm<br>6.00 %
3919 90 80 49Other › Other › Other › Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet6.00 %
3919 90 80 50Other › Other › Other › Self-adhesive reflecting sheet whether or not in segmented pieces,<br>- whether or not containing a watermark,<br>- with or without an application tape coated on one side with an adhesive;<br>the reflective sheet consists of:<br>- a layer of acrylic or vinyl polymer,<br>- a layer of poly(methyl methacrylate)  or  polycarbonate containing microprisms,<br>- a layer of metallisation,<br>- an adhesive layer, and<br>- a release sheet<br>- whether or not containing an additional layer of polyester<br>6.00 %
3919 90 80 53Other › Other › Other › Acrylic foam tape:<br>- covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive, <br>- covered on the other side with an acrylic pressure sensitive adhesive, <br>- covered on one or both sides with a release sheet,<br>- with a peel adhesion of more than 25 n/cm (at an angle of 90° as determined by the astm d 3330 method)<br>6.00 %
3919 90 80 54Other › Other › Other › Poly(vinyl chloride) film, on one side covered with<br>- a polymer layer<br>- an adhesive layer<br>- a release liner, on one side embossed, containing oblate spheres;<br>whether or not on the other side covered with an adhesive layer and a metallised polymer layer<br>6.00 %
3919 90 80 55Other › Other › Other › Black polyvinyl chloride film: <br>-with a gloss of more than 25 degrees according to astm d 2457, <br>-whether or not covered on one side with a protective film of polyethylene terephthalate and on the other side with a micro-structured pressure sensitive acrylic adhesive and a release liner<br>for use in the manufacture of die-cut films for interior and exterior surfaces of cars6.00 %
3919 90 80 56Other › Other › Other › Transparent polyethylene film coated on one side with an aqueous acrylic adhesive, of a thickness of 30 μm to 50 μm, put up in rolls of a width of 52 cm or more but not more than 154 cm6.00 %
3919 90 80 57Other › Other › Other › Self-adhesive polycarbonate film, printed, whether or not arched, with:<br>-a thickness of 0,3 mm or more, but not more than 0,4 mm,<br>-minimum dimensions of 63 mm x 15 mm,<br>-maximum dimensions of 278 mm x 117 mm,<br>-a weight of not more than 5 g per piece,<br>intended for integration into combined instrument panels of passenger cars6.00 %
3919 90 80 58Other › Other › Other › Biaxially-oriented film of poly(methyl methacrylate), with a thickness of 20 μm or more but not more than 90 μm, covered on one side with an adhesive layer and a release sheet6.00 %
3919 90 80 65Other › Other › Other › Self-adhesive film with a thickness of 40 µm or more, but not more than 475 µm, consisting of one or more layers of transparent, metallized or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner6.00 %
3919 90 80 70Other › Other › Other › Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad6.00 %
3919 90 80 80Other › Other › Other › Self adhesive reflecting film, consisting of several layers including:<br>- a copolymer of acrylic resin,<br>- polyurethane, <br>- a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use,<br>- glass microspheres, and<br>- an adhesive layer, with a release liner on one or both sides6.00 %
3919 90 80 82Other › Other › Other › Reflecting film consisting of:<br>- a polyurethane layer,<br>- a glass microspheres layer,<br>- a metallised aluminium layer, and<br>- an adhesive, covered on one or both sides with a release liner,<br>- whether or not a poly(vinyl chloride) layer,<br>- a layer whether or not incorporating security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use<br>6.00 %
3919 90 80 83Other › Other › Other › Reflector or diffuser sheets, in rolls,<br>-for protection against ultraviolet or infra-red heat radiation, to be affixed to windows or<br>-for equal transmission and distribution of light, intended for lcd modules<br>6.00 %
3919 90 80 99Other › Other › Other › Other6.00 %

Shipping products under this heading?

Paste your product list and get the suggested commodity code and duty rate for every item. The first 3 items are free; a full pack of 100 items is $49, one time, no subscription.

Classify my products

The same heading in the other systems: US HTS code 3919 · EU CN code 3919. Have a code already? Check what a code covers.