Commodity codes by chapter › Chapter 38 › Heading 3811

Commodity code 3811 — Anti-knock preparations, oxidation inhibitors, gum inhibitors, viscosity improvers, anti-corrosive preparations and other prepared additives, for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils

Source: UK Trade Tariff, published by HM Revenue & Customs. The rate shown is the third-country duty rate — the rate that applies when no trade-agreement preference is claimed.

Commodity lines under 3811

Commodity codeDescriptionThird-country duty
3811 11 00 00Anti-knock preparations
3811 11 00 00Anti-knock preparations › Based on lead compounds
3811 11 10 00Anti-knock preparations › Based on lead compounds › Based on tetraethyl-lead6.00 %
3811 11 90 00Anti-knock preparations › Based on lead compounds › Other4.00 %
3811 19 00 00Anti-knock preparations › Other
3811 19 00 10Anti-knock preparations › Other › Solution of more than 61 % but not more than 63 % by weight of methylcyclopentadienyl manganese tricarbonyl in an aromatic hydrocarbon solvent, containing by weight not more than:<br>- 4,9 % of 1,2,4-trimethyl-benzene,<br>- 4,9 % of naphthalene, and<br>- 0,5 % of 1,3,5-trimethyl-benzene<br>4.00 %
3811 19 00 90Anti-knock preparations › Other › Other4.00 %
3811 21 00 00Additives for lubricating oils
3811 21 00 00Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals
3811 21 00 11Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Dispersing agent and oxidation inhibitor containing :<br>- o-amino polyisobutylenephenol (cas rn 78330-13-9),<br>- more than 30 % by weight but not more than 50 % by weight of mineral oils,<br>used in the manufacture of blends of additives for lubricating oils4.00 %
3811 21 00 12Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Dispersing agent containing :<br>- esters of polyisobutenyl succinic acid and pentaerythritol (cas rn 103650-95-9),<br>- 35 % or more but not more than 55 % by weight of mineral oils and<br>- with a chlorine content of not more than 0,05 % by weight,<br>used in the manufacture of blends of additives for lubricating oils4.00 %
3811 21 00 13Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additives containing :<br>- borated magnesium (c16-c24) alkylbenzene sulphonates and<br>- mineral oils,<br>having a total base number  (tbn) of more than 250, but not more than 350,  for use in the manufacture of  lubricating oils4.00 %
3811 21 00 14Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Dispersing agent :<br>- containing polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (cas rn 147880-09-9),<br>- containing 35 % or more but not more than 55 % by weight of mineral oils,<br>- with a chlorine content by weight of not more than 0,05 %, <br>- having a total base number of less than 15,<br>used in the manufacture of blends of additives for lubricating oils4.00 %
3811 21 00 16Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Detergent containing :<br>- calcium salt of beta-aminocarbonyl alkylphenol (reaction product mannich base of alkylphenol)<br>- 40 % or more but not more than 60 % by weight of mineral oils and<br>- having a total base number more than 120<br>used in the manufacture of blends of additives for lubricating oils4.00 %
3811 21 00 19Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additives containing:<br>-  a polyisobutylene succinimide based mixture, and<br>-  more than 30 % but not more than 50 % by weight of mineral oils,<br>having a total base number of more than 40, for use in the manufacture of lubricating oils4.00 %
3811 21 00 20Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil4.00 %
3811 21 00 21Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additive containing by weight: <br> -90 % or more but not more than 97 % of reaction products of butyl-cyclohex-3-enecarboxylate and sulphur (cas rn 160305-95-3), <br> -3 % or more but not more than 10 % of mineral oil, <br> for use in the manufacture of blends of additives for lubricating oils4.00 %
3811 21 00 22Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additive consisting essentially of:<br>-polyisobutenyl succinic anhydride (cas rn 192662-34-3) reaction product with n,n-diethylaminoethanol (cas rn 100-37-8),<br>-25 % or more by weight, but not more than 40 % by weight of mineral oil,<br>used in the manufacture of blends of additives for lubricating oils4.00 %
3811 21 00 24Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additive consisting essentially of:<br>-polyisobutenyl succinic anhydride reaction product with polyethylenepolyamines, borated (cas rn 134758-95-5), with a chlorine content by weight of 0,05 % or more but not more than 0,25 % and a total base number (tbn) of more than 20,<br>-45 % and more by weight and no more than 55 % by weight of mineral oil,<br>used in the manufacture of blends of additives for lubricating oils4.00 %
3811 21 00 25Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additives containing:<br>- a  (c8-18) alkyl polymethacrylate copolymer with  n-[3-(dimethylamino)propyl]methacrylamide, of an average molecular weight (mw) of more than 10,000 but not more than 20,000, and<br>- more than 15 % , but not more than 30 % by weight of mineral oils,<br>for use in the manufacture of  lubricating oils4.00 %
3811 21 00 26Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additive consisting essentially of:<br>-phosphorodithioic acid, mixed o,o-bis (1,3-dimethylbutyl and isopropyl) esters, zinc salts (cas rn 84605-29-8),<br>-7 % or more by weight but not more than 12 % by weight of mineral oil,<br>used in the manufacture of blends of additives for lubricating oils4.00 %
3811 21 00 27Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additives containing:<br>-10 % or more by weight of an ethylene-propylene copolymer chemically modified by succinic anhydride groups reacted with 3-nitroaniline, and<br>-mineral oils,<br>for use in the manufacture of lubricating oils4.00 %
3811 21 00 28Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additive consisting essentially of:<br>-zinc bis(o,o-bis(2-ethylhexyl)) bis (dithiophosphate) (cas rn 4259-15-8);<br>-triphenyl phosphite (cas rn 101-02-0) more than 0,5 % by weight but not more than 6 % by weight,<br>-o,o,o-triphenyl phosphorothioate (cas rn 597-82-0) more than 0,5 % by weight but not more than 6 % by weight, and not more than 7,5 % by weight of the combination of triphenylphosphorus compounds<br>-10 % or more by weight but not more than 20 % by weight of mineral oils,<br>used in the manufacture of blends of additives for lubricating oils4.00 %
3811 21 00 29Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additive containing by weight:<br>-25 % or more but not more than 40 % of calcium c16-24 alkylbenzenesulphonates (cas rn 70024-69-0),<br>-30 % or more but not more than 65 % of mineral oils,<br>for use in the manufacture of blends of additives for lubricating oils4.00 %
3811 21 00 30Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process4.00 %
3811 21 00 32Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additive consisting essentially of:<br>-zinc o,o,o',o'-tetrakis (1,3-dimethylbutyl) bis(phosphorodithioate) (cas rn 2215-35-2),<br>-4 % or more by weight but not more than 12 % by weight of mineral oil,<br>used in the manufacture of blends of additives for lubricating oils4.00 %
3811 21 00 33Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additives containing:<br>- calcium salts of heptylphenol reaction products with formaldehyde (cas rn 84605-23-2), and<br>- mineral oils,<br>having a total base number (tbn) of more than 40 but not more than 100, for use in the manufacture of lubricating oils or overbased detergents for use in lubricating oils4.00 %
3811 21 00 34Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Detergent containing:<br>-benzenesulfonic acid, methyl-, mono-c20-24-branched alkyl derivs., calcium salts (cas rn 722503-68-6),<br>-more than 30 % but not more than 60 % by weight of mineral oils, and,<br>-having a total base number of more than 310 but not more than 340,<br>used in the manufacture of blends of additives for lubricating oils4.00 %
3811 21 00 37Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additives containing:<br>- a styrene-maleic anhydride copolymer esterified with c4-c20 alcohols, modified by  aminopropylmorpholine, and<br>- more than 50 % but not more than 75 % by weight of mineral oils,<br> for use in the manufacture of lubricating oils4.00 %
3811 21 00 38Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Solution of mineral oils (cas rn 64742-52-5, 64742-53-6, 64742-56-9 or blends thereof) containing by weight:<br>-25 % or more but not more than 55 % of the barium, calcium, magnesium or zinc salt of dinonylnaphthylsulphonic acid (cas rn 25619-56-1, 28015-99-8, 28016-00-4, or 57855-77-3)<br>-whether or not, not more than 25 % of the barium, calcium, magnesium or zinc salt of a mixture of c3-c24 carboxylic acids (cas rn 68990-37-4)<br>4.00 %
3811 21 00 48Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additives containing:<br>- overbased magnesium (c20-c24) alkylbenzenesulphonates (cas rn 231297-75-9) and<br>- by weight more than 25% but not more than 50% of mineral oils,<br>- having a total base number of more than 350, but not more than 450,<br>for use in the manufacture of lubricating oils or for use in the manufacture of blends of additives for lubricating oils<br>4.00 %
3811 21 00 53Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additives containing: <br>- overbased calcium petroleum sulphonates (cas 68783-96-0) with a sulphonate content by weight of 15 % or more, but not more than 30 % and<br>- by weight more than 40 % but not more than 60 % of mineral oil,<br>having a total base number of 280 or more but not more than 420,for use in the manufacture of lubricating oils4.00 %
3811 21 00 55Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additives containing:<br>- low base number calcium polypropylbenzenesulphonate (cas rn 75975-85-8) and<br>- by weight more than 40 % but not more than 60 % mineral oils,<br>having a total base number of  more than 10 but not more than 25, for use in the manufacture of lubricating oils4.00 %
3811 21 00 60Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additives for lubricating oils, containing mineral oils,<br>- based on calcium polypropylenyl substituted benzenesulphonate (cas rn 75975-85-8) with a content by weight of 25 % or more but not more than 35 %,<br>- with a total base number (tbn) of 280 or more but not more than 320,<br>used as a concentrated additive for the manufacture of engine oils through a blending process4.00 %
3811 21 00 63Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additives containing:<br>- an overbased mixture of calcium petroleum sulphonates (cas rn 61789-86-4) and synthetic calcium alkylbenzenesulphonates (cas rn 68584-23-6 and cas rn 70024-69-0)  with a total sulphonate content by weight of 15 % or more, but not more than 25 % and<br>- by weight more than 40 % but not more than 60 % of mineral oils,<br>having a total base number of 280 or more but not more than 320, for use in the manufacture of lubricating oils4.00 %
3811 21 00 65Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additives containing:<br>- a polyisobutylene succinimide based mixture (cas rn 160610-76-4), and<br>- more than 35 % but not more than 50 % by weight of mineral oils,<br>having a sulphur content of more than 0,7 % but not more than 1,3 % by weight, having a total base number of more than 8, for use in the manufacture of lubricating oils4.00 %
3811 21 00 70Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additives for lubricating oils,<br>- containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (cas rn 84605-20-9),<br>- containing mineral oils,<br>- with a chlorine content by weight of 0,05 % or more but not more than 0,25 %,<br>- with a total base number (tbn) of more than 20,<br>used as a concentrated additive for the manufacture of engine oils through a blending process4.00 %
3811 21 00 73Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additives containing:<br>- borated succinimide compounds (cas rn 134758-95-5),<br>- mineral oils, and<br>- having a total base number (tbn) greater than 40,<br>for use in the manufacture of additive mixtures for lubricating oils4.00 %
3811 21 00 75Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additives containing:<br>- calcium (c10-c14) dialkylbenzenesulfonates,<br>- more than 40 %, but not more than 60 % by weight of mineral oils,<br>with a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oils4.00 %
3811 21 00 77Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Antifoam additives consisting of:<br>- a copolymer of 2-ethylhexyl acrylate and ethyl acrylate, and<br>- more than 50 % but not more than 80 % by weight of mineral oils<br>for use in the manufacture of  additive blends for lubricating oils4.00 %
3811 21 00 80Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additives containing :<br>- polyisobutylene aromatic polyamine succinimide,<br>- more than 40 % but not more than 60 % by weight of mineral oils,<br>with a nitrogen content of more than 0,6 % but not more than 0,9 % by weight, for use in the manufacture of additive blends for lubricating oils4.00 %
3811 21 00 83Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additives containing:<br>- polyisobutene succinimide derived from reaction of polyethylenepolyamines with polyisobutenyl succinic anhydride (cas rn 84605-20-9),<br>- containing more than 31,9 % but not more than 43,3 % by weight of mineral oils,<br>- not more than 0,05 % by weight chlorine, and<br>- having a total base number (tbn) greater than 20,<br>for use in the manufacture of additives blends for lubricating oils4.00 %
3811 21 00 85Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Additives,<br>- containing more than 20 % but not more than 45 % by weight of mineral oils,<br>- based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated,<br>for use in the manufacture of blends of additives4.00 %
3811 21 00 90Additives for lubricating oils › Containing petroleum oils or oils obtained from bituminous minerals › Other4.00 %
3811 29 00 00Additives for lubricating oils › Other
3811 29 00 20Additives for lubricating oils › Other › Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with c12-14 alkyl chains, used as a concentrated additive for the manufacture of lubricating oils4.00 %
3811 29 00 23Additives for lubricating oils › Other › Additive for lubricating oils consisting of molybdenum, bis(dibutylcarbamodithioato)di-μ-oxodioxodi-, sulfurized (cas rn 68412-26-0)4.00 %
3811 29 00 30Additives for lubricating oils › Other › Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (cas rn 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process4.00 %
3811 29 00 33Additives for lubricating oils › Other › Additives for lubricating oils, consisting of a mixture of n,n-dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12 and 18 carbon atoms (cas rn 866259-61-2), used in the manufacture of blends of additives for lubricating oils4.00 %
3811 29 00 38Additives for lubricating oils › Other › Additives consisting of the c12-c14-tert-alkylamine salts of the esters of c14-c18 saturated and c18 unsaturated alcohols with phosphorus pentoxide (cas rn 1471315-74-8), for use in the manufacture of blends of additives for lubricating oils or greases4.00 %
3811 29 00 40Additives for lubricating oils › Other › Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene  with sulphur monochloride and sodium sulphide (cas rn 68511-50-2), with a chlorine content by weight of 0,01 % or more but not more than  0,5 %, used as a concentrated additive for the manufacture of lubricating oils4.00 %
3811 29 00 43Additives for lubricating oils › Other › Reaction products of c14-c18 (branched and linear) and c18 (unsaturated) fatty acids with tetraethylenepentamine (linear, branched, cyclic) (cas rn 68784-17-8), for use in the manufacture of lubricating oils4.00 %
3811 29 00 45Additives for lubricating oils › Other › Additives consisting of a mixture of (c7-c9) dialkyl adipates, in which diisooctyl adipate (cas rn 1330-86-5) is more than 85 % by weight of the mixture, for use in the manufacture of lubricating oils4.00 %
3811 29 00 48Additives for lubricating oils › Other › Mixed c12-c20-alkyl and c14-c18-unsaturated alkyl derivates of phosphonic acid (cas rn 93925-25-8), containing by weight more than 80 % of oleyl, palmityl and stearyl groups, for use in the manufacture of lubricating oils4.00 %
3811 29 00 57Additives for lubricating oils › Other › Additives consisting of reaction products of diphenylamine and branched nonenes with:<br> - more than 20 % but not more than 50 % by weight 4-monononyldiphenylamine, and<br> - more than 50 % but not more than 80 % by weight 4,4'-dinonyldiphenylamine,<br> - a total percentage of 2,4-dinonyldiphenylamine and 2,4'-dinonyldiphenylamine of not more than 15 % by weight,<br> used for the manufacture of lubricating oils4.00 %
3811 29 00 75Additives for lubricating oils › Other › Oxidation inhibitor mainly containing a mixture of isomers of 1-(tert-dodecylthio)propan-2-ol (cas rn 67124-09-8), used in the manufacture of blends of additives for lubricating oils4.00 %
3811 29 00 79Additives for lubricating oils › Other › Additives, consisting of the reaction products of 1,3,4-thiadiazolidine-2,5-dithione with hydrogen peroxide and tert-nonanethiol, containing by weight:<br>- 70 % or more of 2,5-bis(tert-nonyldithio)-[1,3,4]-thiadiazole (cas rn 89347-09-1), and<br>- 10 % or more of 5-(tert-nonyldithio)-1,3,4-thiadiazole-2(3h)-thione (cas rn 97503-12-3),<br>for use in the manufacture of blends of additives for lubricating oils<br>4.00 %
3811 29 00 85Additives for lubricating oils › Other › Additives consisting of a mixture of 3-((c9-11)-isoalkyloxy)tetrahydrothiophene 1,1-dioxide, c10-rich (cas rn 398141-87-2), for use in the manufacture of lubricating oils 4.00 %
3811 29 00 90Additives for lubricating oils › Other › Other4.00 %
3811 90 00 00Other
3811 90 00 40Other › Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight 10% or more but not more than 29,9% of 2-ethylhexanol4.00 %
3811 90 00 50Other › Corrosion inhibitor  containing :<br>- polyisobutenyl succinic acid and <br>- more than 5 % and not more than 20 % by weight of mineral oils<br>for use in the manufacture of blends of additives for fuels4.00 %
3811 90 00 60Other › Solution of mineral oils (cas rn 64742-52-5, 64742-53-6, 64742-56-9 or blends thereof) containing by weight:<br>-25 % or more but not more than 55 % of the barium, calcium, magnesium or zinc salt of dinonylnaphthylsulphonic acid (cas rn 25619-56-1, 28015-99-8, 28016-00-4, or 57855-77-3)<br>-whether or not, not more than 25 % of the barium, calcium, magnesium or zinc salt of a mixture of c3-c24 carboxylic acids (cas rn 68990-37-4)<br>4.00 %
3811 90 00 90Other › Other4.00 %

Shipping products under this heading?

Paste your product list and get the suggested commodity code and duty rate for every item. The first 3 items are free; a full pack of 100 items is $49, one time, no subscription.

Classify my products

The same heading in the other systems: US HTS code 3811 · EU CN code 3811. Have a code already? Check what a code covers.